Streszczenie treści zawartej na stronie nr. 1
CAMERA CONTROL UNIT
INSTRUCTION MANUAL
IK-HD1D
ForCustomerUse
Enter below the Serial #
which is located on the
bottom of the cabinet. Retain
this information for future ref-
erence.
Model # IK-HD1D
Serial #
FCC NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital device, pursu-
ant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against
harmful interference when the equipment is operated in a commercial enviro
Streszczenie treści zawartej na stronie nr. 2
SAFETY PRECAUTIONS Safety icons This manual contains safety instructions that must be observed in order to avoid potential hazards that could result in personal injuries, damage to your equipment, or loss of data. These safety cautions have been classified according to the seriousness of the risk, and the icons highlight these instructions as follows: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. Indicates a potentially hazardous situ
Streszczenie treści zawartej na stronie nr. 3
Note the following instructions when installing. • Do not cover the product with any material. • Do not place the product on any inflammable material such as a carpet or blanket. • Do not place the product in a confined space, as this may cause heat to build up inside the product. Failure to follow the above cautions may result in fire. Do not place the product in direct sunshine and/or high temperature. Temperature build up inside the product may result in fire. Avoid placing in humid, smoky, o
Streszczenie treści zawartej na stronie nr. 4
Limitation of Usage The product is not designed for any “critical applications.” “Critical applications” means life support systems, exhaust or smoke extraction applications, medical applications, commercial aviation, mass transit applications, military applications, homeland security applications, nuclear facilities or systems or any other applications where product failure could lead to injury to persons or less of life or catastrophic property damage. Accordingly, [Toshiba/TAIS] disclaims
Streszczenie treści zawartej na stronie nr. 5
(6) SYNC........................................................................................................................... 28 (6.1) INT screen........................................................................................................... 28 (6.2) Changing EXT. setting ........................................................................................ 28 (7) OPTION......................................................................................................
Streszczenie treści zawartej na stronie nr. 6
1. CAUTIONS ON USE AND INSTALLATION Handling the unit. The following descriptions are for the camera head • "IK-HD1H" connected to this camera control unit. Do not drop, jolt, or vibrate, as this may result in damage to the unit. This may cause problems. Do not shoot intense light. • Treat the camera cables carefully to prevent If there is an intense light at a location on the cable problems, such as breaks in the cable and screen such as a spot light, a blooming and smear- loose connectio
Streszczenie treści zawartej na stronie nr. 7
Electronic shutter Gain Matrix color correction White balance 3 ITEMS CONTROLLED BY THE ON SCREEN DISPLAY Preset value Item Available selections (Factory setting) MODE AUTO, MANUAL, SS MANUAL -100 0 100 AUTO level 0 AUTO peak/average 00 10 05 05 10 00 05 05 AUTO response speed 1 10 20 10 AUTO area PRESET A, PRESET B, PRESET C, PRESET A PRESET D, PRESET E MANUAL speed OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, OFF 1/3000s, 1/5000s, 1/10000s, 1/30000s, 1/50000s Syncro. scan OFF, 1/1125H
Streszczenie treści zawartej na stronie nr. 8
4. NAMES AND FUNCTIONS FILE button DISP button POWER switch MENU UP (SHD) button POWER LED DATA UP (AWB) button Camera cable for “IK-HD1H” DATA DOWN terminal (ABB) button GAIN button MENU DOWN (SHD) button PAGE button [Front] PB/B terminal PR/R terminal Y/G terminal KEY LOCK switch 1 4 DC IN 12V terminal 2 3 FORMAT switch DVI-D terminal 12 34 5 6 7 8 87 6 9 10 11 12 13 14 15 16 5 43 17 18 19 20 21 22 23 24 2 1 SYNC OUT terminal REMOTE terminal EXT. SYNC terminal [Rear] Camera cable for Where
Streszczenie treści zawartej na stronie nr. 9
DC IN 12V terminal Accept a DC power input (12V). Y/G terminal Outputs Y or G. (BNC connector) PB/B terminal Outputs PB or B. (BNC connector) PR/R terminal Outputs PR or R. (BNC connector) REMOTE terminal To connect to a RS-232C device for remote control function. EXT. SYNC terminal Used when the camera output signal is synchronized to an external signal. (BNC connector) SYNC OUT terminal Output terminal for synchronization signal. (BNC connector) DVI-D terminal Outputs DVI-D to
Streszczenie treści zawartej na stronie nr. 10
5 2 Caution on Connection Only use optional camera head model # IK-HD1H with this camera controller. The use of another head may cause damage to the control unit and camera head. When connecting the camera cables, be sure to turn off the camera control unit and any other equipment connected to it. For DC power supply connecting to DC IN 12V terminal, use UL listed and/or CSA approved ungrounded type AC adaptor with the specifications described below. Power supply voltage 12V DC 1
Streszczenie treści zawartej na stronie nr. 11
6 OPERATION A camera head "IK-HD1H" needs to be connected to this camera control unit from this section on. Refer to the item “5. CONNECTION”, to connect the equipment correctly. Turn on the connected equipment and the camera. When using the camera for the first time and when replacing the camera cable and the camera head, be sure to perform the ABB adjustment, refer to the item “6.1 Automatic Black Balance”. Aim the lens at the object, adjust the lens iris adjustment, focus adjustment,
Streszczenie treści zawartej na stronie nr. 12
6 2 White Balance For white balance adjustment of this unit, ATW (Automatic Tracking White balance), AWB (Automatic White Balance) and MANUAL (Manual white balance) adjustments are provided. Refer to the items “7.2 (3) WHT BAL (White Balance), 7. MODE SETTING BY THE ON SCREEN DISPLAY”, select the desired mode. ATW AWB MANUAL Automatic Tracking Automatic White Balance Manual White Balance White Balance The camera measures the Adjust white balance by Adjust the white balance Ou
Streszczenie treści zawartej na stronie nr. 13
Display Meaning AWB OK Automatic white balance adjustment finished correctly. AWB NG Automatic white balance adjustment cannot be performed because the video level is LEVEL LOW too low. Adjust the video level by increasing the illumination or opening the lens iris. AWB NG Automatic white balance adjustment cannot be performed because the video level is LEVEL HIGH too high. Adjust the video level by decreasing the illumination or closing the lens iris. AWB NG Automatic white balance adjustme
Streszczenie treści zawartej na stronie nr. 14
6 3 Scene File Five scene files (A, B, C, D, E) are available as user memories for this unit. These are chosen depending on shooting conditions. By using the [FILE] button, the camera operation is changed immediately from the currently selected Scene File to the next. (Refer to the item “7. MODE SETTING BY THE ON SCREEN DISPLAY”.) While any menu is displayed, pressing the [FILE] button will display the menu settings for the next Scene File: FILE A FILE B FILE C FILE D FILE E Whe
Streszczenie treści zawartej na stronie nr. 15
Note: White, red, green, or blue dots may occur when the gain is increased. This is not a malfunction, just certain characteristics of the CCD becoming more visible. 6 5 Shading Correction Due to the lens used or the environmental condition, color shading may occur at the upper and lower edge of the screen. If this happens, the shading correction function can be used to decrease the amount of color shading. For shading correction of the unit, SET (Automatic shading correction), MANUAL (Manual
Streszczenie treści zawartej na stronie nr. 16
7 MODE SETTING BY THE ON SCREEN DISPLAY Various settings can be controlled on the unit by using the on screen menu displayed on the monitor. The contents once set are memorized in the scene files (A, B, C, D, E) selected, so if the power turns off, it is unnecessary to set again when using the unit next time. When the setting is performed, select the menu of the item to be set. 7 1 Using the Menus When the power turns on, the normal screen showing only the video signal appears. Change the
Streszczenie treści zawartej na stronie nr. 17
7 2 Menus Select the menu to change the setting by referring to the item “7.1 Using the Menus”. When the [MENU UP], [MENU DOWN] buttons are pushed, the “ ” on the screen moves up and down. Move the “ ” to the item whose setting you wish to change. 1 SHUTTER Electronic shutter The electronic shutter has four modes; AUTO, MANUAL, SS(Synchro. Scan). Press the “Page” button to enter the Shutter Page. Use the “Data Up/Down” buttons to select the Shutter Mode. AUTO MANUAL SS
Streszczenie treści zawartej na stronie nr. 18
1 1 Changing the setting in AUTO mode Move up and down Select the desired by pushing value by pushing MENU UP,DOWN DATA UP,DOWN Shutter mode AUTO, MANUAL, SS Video level adjustment -100 to 100 -- 1 SHUTTER -- Peak and average ratio adjustment 00 10 to 10 00 MODE AUTO LEVEL 0 Automatic shutter response speed adjustment 1 to 20 PEAKAVE 0505 SPEED 10 Automatic shutter area selection AREA PRESET A PRESET A, PRESET B, PRESET C, PRESET D, PRESET E < MODE = AUTO> (
Streszczenie treści zawartej na stronie nr. 19
(d) Changing the automatic shutter zone area Move the “ ” to AREA by pushing [MENU UP], [MENU DOWN] buttons. Select the measurement light area by pushing [DATA UP], [DATA DOWN] buttons. DATA UP PRESET A PRESET B PRESET C PRESET D PRESET E DATA DOWN The available picture area is shown by the shading correction on the screen that is parted in 64. PRESET A PRESET B PRESET C PRESET D PRESET E Note: These available picture areas are not displayed on the screen. 19
Streszczenie treści zawartej na stronie nr. 20
1 2 Changing the setting in MANUAL mode Move up and down Select the desired by pushing value by pushing MENU UP,DOWN DATA UP,DOWN Shutter mode AUTO, MANUAL, SS -- 1 SHUTTER -- Shutter speed setting MODE MANUAL OFF, 1/100s, 1/125s, 1/250s, 1/500s, 1/1000s, MANUAL 110000s 1/3000s, 1/5000s, 1/10000s, 1/30000s, 1/50000s < MODE = MANUAL> (a) Changing the shutter speed Move the “ ” to MANU by pushing [MENU UP], [MENU DOWN] buttons. Select the shutter speed
