Instrukcja obsługi Infinity TSS-800

Streszczenie treści zawartej na stronie nr. 1

TSS-800 (120V) OM 2/24/06 10:01 AM Page 3
TOTAL SPEAKER SOLUTIONS
TSS-800
Owner’s Guide
(120V)

Streszczenie treści zawartej na stronie nr. 2

TSS-800 (120V) OM 2/24/06 10:01 AM Page 4 IMPORTANT SAFETY PRECAUTIONS Read First! 14. Refer all servicing to qualified service 19. Do not overload wall outlets, extension cords, CAUTION personnel. Servicing is required when the or integral convenience receptacles, as this can apparatus has been damaged in any way, such result in a risk of fire or electric shock. RISK OF ELECTRIC SHOCK as power-supply cord or plug is damaged, liquid DO NOT OPEN 20. Never push objects of any kind into this ha

Streszczenie treści zawartej na stronie nr. 3

TSS-800 (120V) OM 2/24/06 10:01 AM Page 5 TSS-800 OWNER’S GUIDE Table of Contents ii Important Safety Precautions 1 Introduction 1 Unpacking the System 1 Planning Your System 2 Placement 2 Wall-Mounting the Satellites and Center Channel 4 Center and Satellite Speaker Connections 5 Subwoofer Controls 6 Subwoofer Connections 7 Operation 7 Maintenance and Service 8 Specifications iii TSS-800 (120V)

Streszczenie treści zawartej na stronie nr. 4

Streszczenie treści zawartej na stronie nr. 5

Streszczenie treści zawartej na stronie nr. 6

Streszczenie treści zawartej na stronie nr. 7

TSS-800 (120V) OM 2/24/06 10:01 AM Page 9 CENTER AND SATELLITE SPEAKER CONNECTIONS Center Channel Turn Off All Power After placing the speakers, you are ready to connect your system. Observe polarities when making speaker connections, as shown in Figure 5. Connect each + terminal on the back of the amplifier or First, turn off all audio-system power. Use high-quality speaker wire to make your connections. #18-gauge speaker wire with receiver to the respective + (red) terminal on the speaker.

Streszczenie treści zawartej na stronie nr. 8

Streszczenie treści zawartej na stronie nr. 9

Streszczenie treści zawartej na stronie nr. 10

TSS-800 (120V) OM 2/24/06 10:01 AM Page 12 OPERATION Surround Modes Crossover Adjustment When using the TSS-800 in a Dolby Digital or DTS home theater The Crossover Frequency Control 2 determines the highest system, make sure all speakers are set to “Small” . In a Dolby frequency at which the subwoofer reproduces sounds. For the ® Pro Logic home theater system, make sure the receiver’s TSS-800, it is recommended that this control be set at 120Hz center channel mode is set to “Normal.” (appro

Streszczenie treści zawartej na stronie nr. 11

TSS-800 (120V) OM 2/24/06 10:01 AM Page 13 SPECIFICATIONS TSS-800 Satellites Center Channel Frequency Range: 120Hz – 30kHz (±3dB) 120Hz – 30kHz (±3dB) Recommended Amplifier Power Range: 10 – 100 Watts 10 – 125 Watts Sensitivity: 88dB 89dB (2.83V @ 1 meter) Nominal Impedance: 8Ω 8Ω Crossover Frequency: 3.5kHz; 12dB/Octave 3.5kHz; 12dB/Octave ® ® Midrange Driver(s): 3-1/2" (87mm) MMD, Dual 3-1/2" (87mm) MMD, magnetically shielded magnetically shielded ® ® High-Frequency Driver: 3/4" (19mm) MMD,

Streszczenie treści zawartej na stronie nr. 12

TSS-800 (120V) OM 2/24/06 10:01 AM Page 2 © 2006 Harman International Industries, Incorporated.All rights reserved. Infinity Systems, 250 Crossways Park Drive,Woodbury, NY 11797 USA www.infinitysystems.com Infinity, Harman International and MMD are trademarks of Harman International Industries, Incorporated, registered in the United States and/or other countries. Total Solutions and Metal Matrix Diaphragm are trademarks of Harman International Industries, Incorporated. Dolby and Pro Logic