Instrukcja obsługi Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC

Instrukcja obsługi dla urządzenia Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC

Urządzenie: Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC
Kategoria: Glosnik
Producent: Velodyne Acoustics
Rozmiar: 3.41 MB
Data dodania: 7/2/2014
Liczba stron: 26
Drukuj instrukcję

Pobierz

Jak korzystać?

Naszym celem jest zapewnienie Ci jak najszybszego dostępu do treści zawartych w instrukcji obsługi urządzenia Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC. Korzystając z podglądu online możesz szybko przejrzeć spis treści i przejść do strony, na której znajdziesz rozwiązanie swojego problemu z Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC.

Dla Twojej wygody

Jeżeli przeglądanie instrukcji Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC bezpośrednio na tej stornie nie jest dla Ciebie wygodne, możesz skorzystać z dwóch możliwych rozwiązań:

  • Przeglądanie pełnoekranowe - Aby wygodnie przeglądać instrukcję (bez pobierania jej na komputer) możesz wykorzystać tryp przeglądania pełnoekranowego. Aby uruchomić przeglądanie instrukcji Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC na pełnym ekranie, użyj przycisku Pełny ekran.
  • Pobranie na komputer - Możesz również pobrać instrukcję Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC na swój komputer i zachować ją w swoich zbiorach. Jeżeli nie chcesz jednak marnować miejsca na swoim urządzeniu, zawsze możesz pobrać ją w przyszłości z ManualsBase.
Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC Instrukcja obsługi - Online PDF
Advertisement
« Page 1 of 26 »
Advertisement
Wersja drukowana

Wiele osób woli czytać dokumenty nie na ekranie, lecz w wersji drukowanej. Opcja wydruku instrukcji również została przewidziana i możesz z niej skorzystać klikając w link znajdujący się powyżej - Drukuj instrukcję. Nie musisz drukować całej instrukcji Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC a jedynie wybrane strony. Szanuj papier.

Streszczenia

Poniżej znajdziesz zajawki treści znajdujących się na kolejnych stronach instrukcji do Velodyne Acoustics SC-1250., SC-8, SC10, SC-12, SC-15, SC-IW, SC-IF, SC-IC. Jeżeli chcesz szybko przejrzeć zawartość stron znajdujących się na kolejnych strinach instrukcji, możesz z nich skorzystać.

Streszczenia treści
Streszczenie treści zawartej na stronie nr. 1



SubContractor
Series
Amplifier /
Subwoofers
USER’S
MANUAL
SC-1250 Amplifier,
SC-8, SC-10, SC-12, SC-15,
SC-IW, SC-IF, SC-IC Subwoofers

Streszczenie treści zawartej na stronie nr. 2

Caution! . www.v elodyne.com SubContractor User’s Manual I

Streszczenie treści zawartej na stronie nr. 3

Attention! . www.v elodyne.com SubContractor User’s Manual II

Streszczenie treści zawartej na stronie nr. 4

Vorsicht! . www.v elodyne.com SubContractor User’s Manual III

Streszczenie treści zawartej na stronie nr. 5

Attenzione! . www.v elodyne.com SubContractor User’s Manual IV

Streszczenie treści zawartej na stronie nr. 6

Table of Contents Congratulations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 Product Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 – SC-1250 Subwoofer Amplifier . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 – SC-8, SC-10, SC-12, SC-15, SC-IW, SC-IF Woofers . . . . . . . . . . . . . . . . . . . . . . . . .2 Installation . . . . . . . .

Streszczenie treści zawartej na stronie nr. 7

Congratulations Congratulations on your purchase of a Velodyne SubContractor Series subwoofer. This system represents the state-of-the-art in low frequency reproduction. Read and follow the instructions below to insure safe and proper system operation. Warning! To prevent fire or shock hazard, do not expose this equipment to rain or moisture. To avoid electrical shock, do not open speaker enclosure or amp chassis cover. Please observe all warnings on the equipment itself. There are no user servi

Streszczenie treści zawartej na stronie nr. 8

SC-8, SC-10, SC-12, SC-15, SC-IW, SC-IF/IC Subwoofers S C-8: - 8” (6.5” piston diameter) subwoofer - 2.5” high-temp voice coil - Oversized spider for linearity at high excursion - High-excursion EPDM rubber surround - 107 ounce magnet/204 ounce motor structure - Frequency Response: 28 - 120 Hz (+/- 3 dB) - 8 ohm impedance SC-10: - 10” (8” piston diameter) subwoofer - 3” high temperature inside/outside voice coil - Oversized spider for linearity at high excursion - High-excursion EPDM rubber su

Streszczenie treści zawartej na stronie nr. 9

SC-IF/SC-IC (In-Floor/In-Ceiling): - 12” (9.7” piston diameter) subwoofer - 3” high temperature inside/outside voice coil - Oversized spider for linearity at high excursion - High-excursion EPDM rubber surround - 162 ounce magnet/346 ounce motor structure - Magnetically shielded for video use - Frequency Response: 22 - 120Hz (+/- 3 dB) - 8 ohm impedance Installation Your new Velodyne amplifier provides for a number of installation options. Read all the installation information below in order to

Streszczenie treści zawartej na stronie nr. 10

(5) Low-Pass Crossover Use these up and down buttons to select the high-frequency range at which you wish to cut off the signal to the subwoofer. The frequency is indicated on the LED display briefly, then the display reverts to showing the subwoofer’s volume. The slope is fixed at 24 dB/octave. To deactivate the crossover, press BOTH the up and down crossover buttons at the same time – two dashes on the display indicate the crossover is deactivated and the woofer plays all frequencies present

Streszczenie treści zawartej na stronie nr. 11

(9) Thru Jacks (See Figure 3A) These RCA connectors are for passing along the same signal that goes into your subwoofer to a second “daisy-chained” subwoofer. The signal from these RCA connectors is the same as the input signal. (10) Line Input / LFE Input (See Figure 3A & 3B) Connect these jacks to the LINE OUT preamp output, LFE output, or subwoofer output jacks of your receiver/processor. If using the LFE output from your receiver or processor, plug the single cable into the jack labeled

Streszczenie treści zawartej na stronie nr. 12

Option 2 Figure 3B: Stereo Line-Level Connection. . www.v elodyne.com SubContractor User’s Manual 6

Streszczenie treści zawartej na stronie nr. 13

(11) Balanced XLR LFE Input (See Figure 4) This XLR input jack receives the balanced LFE signal from your receiver or processor. Figure 4: Balanced Line-Level Connection. (12) Mic Input Connect the supplied microphone for the Auto-EQ feature to this mini-jack. (13) IR Input Connect an IR repeater to this jack for use with universal remote systems. (14) 12V Trigger When this mini jack is connected, the unit remains in power-off mode until 12 volts is supplied across the two leads. Polarity is

Streszczenie treści zawartej na stronie nr. 14

(16) Auto ON/OFF Switch Use this switch to select between auto-on active and auto-on inactive (constant on) operation. For maximum amplifier life, we recommend using the auto-on/off feature. (17) Speaker Level Output Terminals (See Figure 5) These connections send a crossed-over speaker-level signal to the front speakers. When connected in this fashion, your satellite speakers will be crossed over at 80 Hz. This removes the lower bass frequencies from your satellites, enabling them to do a

Streszczenie treści zawartej na stronie nr. 15

(18) Speaker Level Input Terminals (See Figure 5) Connect these input terminals to the speaker output terminals of your amplifier or receiver. If you use this method of connection, when you go to the receiver speaker set up menu, make sure you select the “large” speaker option. (19) Subwoofer Connection Terminals Connect these output terminals to the subwoofer(s) being controlled by the SC-1250. Only connect ONE subwoofer per red/black pair of subwoofer output terminals - DO NOT connect the s

Streszczenie treści zawartej na stronie nr. 16

You should set the crossover frequency to obtain a smooth and seamless transition from the subwoofer(s) to the main speakers in your system. If your main speakers are smaller units with limited low frequency output, you may wish to choose a higher frequency (such as 100-120 Hz) than you would with larger speakers which have greater low frequency output. With larger speakers, you might start with this control set lower, such as 80 Hz. Most receivers and processors provide an option to character

Streszczenie treści zawartej na stronie nr. 17

A Word About Subwoofer Placement Subwoofers operate at extremely low frequencies, which are primarily omni-directional. Keep in m ind that frequency response and output level can be drastically influenced by placement, depending on the acoustic properties of the listening room. Typically, the optimum location for a subwoofer is in a front corner of your listening room. This location will usually offer the greatest output levels and optimum low frequency extension. The worst location for a subw

Streszczenie treści zawartej na stronie nr. 18

Usage This section addresses day-to-day usage of your SC-1250 amplifier. Remote Control The features of the SC-1250 remote control are listed below. • POWER — This button forces your SC-1250 unit into standby mode. The power LED turns amber, the numeric LED shuts off, and the amplifier puts out no power. The unit will remain in this mode until the POWER button is pressed again. To fully deactivate (i.e. power down) the unit, press the power switch on the front panel. Note: The master power sw

Streszczenie treści zawartej na stronie nr. 19

• PRESETS — There are 4 presets, consisting of Movies, R&B – Rock, Jazz – Classical, and Games. As a preset is chosen, the preset is shown on the numeric LED as P1 for preset 1, P2 for preset 2, etc. The presets provide the following characteristics for bass reproduction: Movies: Maximum output and impact for explosions and other action adventure movie content. R&B – Rock: Provides the driving bass found in today’s rock music. Jazz – Classical: The tightest, cleanest, lowest distortion bass.

Streszczenie treści zawartej na stronie nr. 20

Each preset has its own characteristics with respect to subsonic filter, volume differential and a single equalizer (EQ) in order to optimize the listening mode for the preset. The following table shows the settings for the various presets: Preset Subsonic Filter EQ EQ Volume Frequency Frequency Level Differential Movies 24 Hz 37 Hz +4 dB +8 dB R&B – Rock 27 Hz 52 Hz +3 dB +5 dB Jazz – Classical 24 Hz N/A N/A N/A (Reference) Games 34 Hz 62 +4 dB +4 dB Restoring Defaults There is a feature that a


Podobne instrukcje
# Instrukcja obsługi Kategoria Pobierz
1 Velodyne Acoustics CHT-12R Instrukcja obsługi Glosnik 32
2 Velodyne Acoustics DEQ-12R Instrukcja obsługi Glosnik 4
3 Velodyne Acoustics 1012XII Instrukcja obsługi Glosnik 5
4 Velodyne Acoustics CHT-10R Instrukcja obsługi Glosnik 47
5 Velodyne Acoustics DEQ-10R Instrukcja obsługi Glosnik 1
6 Velodyne Acoustics 800 Instrukcja obsługi Glosnik 0
7 Velodyne Acoustics 810 Instrukcja obsługi Glosnik 0
8 Velodyne Acoustics CHT-8R Instrukcja obsługi Glosnik 26
9 Velodyne Acoustics ADWANTAGE IA-400 Instrukcja obsługi Glosnik 0
10 Velodyne Acoustics DF-12sc Instrukcja obsługi Glosnik 11
11 Velodyne Acoustics DEQ-15R Instrukcja obsługi Glosnik 1
12 Velodyne Acoustics DEQ-8R Instrukcja obsługi Glosnik 0
13 Velodyne Acoustics DF-10sc Instrukcja obsługi Glosnik 10
14 Velodyne Acoustics Digital Drive Instrukcja obsługi Glosnik 4
15 Velodyne Acoustics DPS SERIES DPS-10 Instrukcja obsługi Glosnik 13
16 Sony ACTIVE SUBWOOFER SA-W3800 Instrukcja obsługi Glosnik 5
17 Sony ACTIVE SUBWOOFER sa-w3000 Instrukcja obsługi Glosnik 9
18 Sony CR205 Instrukcja obsługi Glosnik 2
19 Sony CDP-C40 Instrukcja obsługi Glosnik 3
20 Sony DAV-JZ8888K Instrukcja obsługi Glosnik 14