Instrukcja obsługi Turbosound TCX-10

Streszczenie treści zawartej na stronie nr. 1

Quick Start Guide
TCX series
Models covered by this Quick Start Guide
TCX-8, TCX-10, TCX-12, TCX-15, TCX-15B, TCX-18B
Thank you for choosing a TURBOSOUND loudspeaker product for your application. If you would like further information about
this or any other TURBOSOUND product, please visit our website at www.turbosound.com. A detailed user guide on this product
range is available from ftp://ftp.turbosound.com
Unpacking the loudspeaker
After unpacking the unit please check carefully for d

Streszczenie treści zawartej na stronie nr. 2

Quick Start Guide TCX series Networking capability with LMS series controllers • LMS-D2X controllers are designed to offer control and monitoring of system parameters over a BvNet network in real time using a PC and TurboDrive™ software. The controllers are equipped with network cards to allow the building of comprehensive networked loudspeaker systems. • Download the TurboDrive™ software from the supplied CD or from ftp://ftp.turbosound.com/tech_data/software/ and follow the installation

Streszczenie treści zawartej na stronie nr. 3

Quick Start Guide TCX series Wall brackets Illustrated: TCX-12 on a WB-55 wall bracket • Separate the component parts of the bracket into the wall plate and speaker plate assemblies by removing the nylock nut underneath the wall plate horizontal lug. • Remove the countersunk bolts on the rear panel of the cabinet and attach the speaker plate to the cabinet with the bolts supplied. • Fix the wall plate in the venue using appropriate fixings (not supplied), ensuring that the cable access

Streszczenie treści zawartej na stronie nr. 4

Quick Start Guide TCX series Servicing and driver removal 1. Place the cabinet on its back on a suitable work surface. Remove the six Pozidrive countersunk screws that hold the grille in place and set the grille aside (fig 1). 2. Remove the M5 hex head bass driver fixings screws (fig 2). 3. Disconnect and remove the bass driver, making a note of the polarity for later reconnection (fig 3). 4. Remove the M5 hex head HF horn fixing screws (fig 4). 5. Lift out the horn and compression d

Streszczenie treści zawartej na stronie nr. 5

Quick Start Guide TCX series 6. Reinstatement is a simple reversal of the above process. Reconnect the compression driver cables, observing the correct polarity (white cable to the +ve terminal, green/white cable to the –ve terminal). 7. Replace the horn and driver in the cabinet. 8. Replace the horn fixing screws and tighten. 9. Reconnect the bass driver cables, observing the correct polarity (brown cable to the red +ve terminal, blue cable to the black –ve terminal) and reinstate the dr

Streszczenie treści zawartej na stronie nr. 6

Quick Start Guide TCX series Technical Specifications Model TCX-8 TCX-10 TCX-12 TCX-15 TCX-15B TCX-18B Dimensions (mm) 408 x 312 x 280 488 x 370 x 332 552 x 410 x 368 652 x 470 x 422 600 x 500 x 600 838 x 469 x 440 (inches) 16.1 x 12.3 x 11 19.2 x 14.6 x 13.1 21.7 x 16.1 x 14.5 25.7 x 18.5 x 16.6 23.6 x 19.7 x 23.6 33 x 18.5 x 17.3 Net weight 9.5kg (21lbs) 13.5kg (29.7lbs) 19.5kg (43lbs) 24.5kg (54lbs) 35.5 kg (78lbs) 40 kg (88lbs) Components 1 x 8” LF driver 1 x 10” LF driver 1 x 12” LF