Instrukcja obsługi Sound Tech CT10

Streszczenie treści zawartej na stronie nr. 1

INSTALLATION INSTRUCTIONS
CT10 Loudspeaker with Accessories
APPLICATIONS: Installation into sheetrock ceilings**, Installation into drop ceilings**
Installation into Concealed Spline Ceilings**, **with or without back-
box — new or existing construction
REQUIRED ACCESSORIES: See Text
ACCESSORY DATA
TECHNICAL SPECIFICATIONS
CT10: 8 ohm and 16W multi-tap 70.7V or 100V trans- PBB8-10 Industry Standard Stackable Enclosure (Back-
former, with torsion spring mounting hardware can). Weight 1.9 lb. (0.8

Streszczenie treści zawartej na stronie nr. 2

MOUNTING LOCATIONS INSTALLATION SOUND ADVANCE products provide outstanding per- formance and economic advantages when installed in The notes below are intended to provide general informa- environments with an ambient noise level at or below tion and assistance in the installation of a CT10 and its 75dBA, where the speakers can be placed between 8 and compatible hardware in a variety of situations, and shall 18 feet above the fl oor, and which are large enough to ac- not be used as a step-by-

Streszczenie treści zawartej na stronie nr. 3

inserted, and that the spring receptables are the fl at, NOTE: Do not use the white trans- slotted type. former wire in a 100V installation. 3. Secure the connections using a PRODUCT-SPECIFIC NOTES suitable method such as wire nuts, crimps, or solder/shrink tubing as � The UMB8-10 Universal Mounting Bracket has horseshoe required by local codes. tabs that allow it and the PBB8-10 backcan to be mechani- cally interlocked. Please refer to the instructions provided � Fold-over and securely tape

Streszczenie treści zawartej na stronie nr. 4

FINAL INSTALLATION If not previously done, insert the torsion springs into the receptacles of the selected hardware. Raise the speaker so that the springs hold the speaker fl ush with the ceiling tile. Remove the protective cardboard disk. PBB8-10 Backcan UMB8-10 Mounting Bracket CT10 Speaker If a situation should arise which cannot be resolved through the information contained in these installation instructions, please contact SOUND ADVANCE Customer Support Services at (800) 592-4644 or (