Streszczenie treści zawartej na stronie nr. 1
HP Netserver LP 1000r
User Guide
(1.13 and 1.26 GHz)
Online Version: 2.0
Last Updated: June 2001
Streszczenie treści zawartej na stronie nr. 2
Notice The information contained in this document is subject to change without notice. Hewlett-Packard makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Hewlett-Packard shall not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of this material. Hewlett-Packard assumes no responsibili
Streszczenie treści zawartej na stronie nr. 3
Contents 1 Controls, Ports, and Indicators...................................................................... 1 Introduction ........................................................................................................ 1 Front Panel.................................................................................................... 1 Rear View...................................................................................................... 4 Applying Power to the HP Netserv
Streszczenie treści zawartej na stronie nr. 4
Contents Removing DIMMs ............................................................................................ 33 5 Installing Additional Boards......................................................................... 35 Introduction...................................................................................................... 35 Tested PCI Boards...................................................................................... 35 Tools Required ............................
Streszczenie treści zawartej na stronie nr. 5
Contents Tools Required ............................................................................................ 73 Rack Configuration Tools............................................................................ 73 Safety Precautions ...................................................................................... 74 Preparing the Rack.......................................................................................... 75 HP Netserver Rack Mount Parts List ...............
Streszczenie treści zawartej na stronie nr. 6
Contents Netserver Will Not Power On ...................................................................... 98 Problems after Netserver is Powered On.................................................... 99 Error Messages ............................................................................................. 100 POST Error Messages .............................................................................. 102 Power-On Self Test (POST) Error Codes ....................................
Streszczenie treści zawartej na stronie nr. 7
SCSI Activity Disk ID 2 Disk ID 1 Disk ID 0 Fans Temperature 1 Controls, Ports, and Indicators Introduction Before operating the HP Netserver LP 1000r, familiarize yourself with the Netserver's controls, ports, and indicators, as shown in Figures 1-1 through 1-3. Front Panel The front panel of the HP Netserver provides the controls and indicators commonly used when operating the Netserver. Bezel (removed) CD-ROM LED Indicators Flexible Disk Drive Power LED and Switch SCSI Drives (3) Po
Streszczenie treści zawartej na stronie nr. 8
Chapter 1 Controls, Ports, and Indicators FDD Eject Button CD-ROM Eject Button CD-ROM CD-ROM Activity LED FDD Activity LED Flexible Disk Drive (FDD) SCSI Disk ID 0 SCSI Disk ID 1 SCSI Disk ID 2 Figure 1-2. Input and Storage Device Controls Table 1-1. Power Switch and Indicators Control/Indicator Description Power On/Off/Sleep This push-button switch turns the HP Netserver power On or Off, and if available, also transitions the Netserver Switch between Power On and sleep states. If sleep
Streszczenie treści zawartej na stronie nr. 9
Chapter 1 Controls, Ports, and Indicators Table 1-2. Component Indicators LED ICON Description This Temperature LED has four distinctive states and is Temperature LED linked to the two processors and a sensor on the system board. • Steady Green for normal operation. • Alternating Green/Red indicates the temperature has crossed the warning threshold. If this condition continues a system crash and possible data corruption will occur. Must take action to correct problem. • Steady R
Streszczenie treści zawartej na stronie nr. 10
Chapter 1 Controls, Ports, and Indicators LED ICON Description Disk ID 0, ID 1, These Disk LEDs have five distinctive states for the and ID 2 LED respective SCSI disk drive: • Off for SCSI drive not present • Steady Green for SCSI drive present • Steady Red for a SCSI drive failure • Alternating Green/Red at 1 Hz blink rate for a SCSI drive rebuild • Alternating Green/Red at 3 Hz blink rate for SCSI drive identification SCSI Activity This LED is the SCSI Hard Disk Drive Activ
Streszczenie treści zawartej na stronie nr. 11
Chapter 1 Controls, Ports, and Indicators • The two LAN ports (LAN A/MGMT and LAN B) are for embedded controllers based on Intel's 82559 10/100 BaseT Fast Ethernet controller. Only LAN A/MGMT is used with Alert-on-LAN 2 (AOL2) and Wake-on- LAN remote management functions. Each one has a RJ-45 LAN connector and two LEDs to indicate LAN speed and valid connection. Refer to Table 1- 3 for the LAN LED indicators and Chapter 10, "Configuring the HP Netserver." • The external SCSI port provid
Streszczenie treści zawartej na stronie nr. 12
Chapter 1 Controls, Ports, and Indicators Applying Power to the HP Netserver Powering-Up the Netserver NOTE Turn on power to the monitor connected to the HP Netserver before you power-on the Netserver. This allows proper auto-configuration of video output of the Netserver as it boots up. 1. Ensure the HP Netserver's power cord is connected to the power source. See Figure 1-3. 2. Press the Power push-button on the front control panel. See Figure 1-1. When you press the power button o
Streszczenie treści zawartej na stronie nr. 13
Chapter 1 Controls, Ports, and Indicators Connecting AC Power to Multiple-Server Configurations The HP Netserver temporarily draws a large "inrush current" when first connected to an AC power source. This also occurs when the Netserver is in a standby mode (power is turned off, but the power cord is plugged into AC power). The inrush current is much greater than the Netserver's normal operating current, and generally the AC power source can handle the normal inrush current. However, if y
Streszczenie treści zawartej na stronie nr. 14
Chapter 1 Controls, Ports, and Indicators The Netserver supports certain types of system activity, which is used as wake-up events from these sleep states. These wake-up events can be generated from the power button, LAN activity, and scheduled events. NOTE The HP Netserver’s power management policies (transitions between various power states) and the user options are specific to the particular ACPI-compliant NOS installed on the Netserver. If your NOS is ACPI-compliant, refer to the pow
Streszczenie treści zawartej na stronie nr. 15
2 Opening and Closing the HP Netserver Introduction This chapter describes how to the remove the top cover, front bezel, and the air duct from the HP Netserver LP 1000r. WARNING Before removing the top cover, always disconnect the power cord and unplug telephone cables. Disconnect the power cord to avoid exposure to high energy levels that may cause burns when parts are short-circuited by metal objects, such as tools or jewelry. Disconnect telephone cables to avoid exposure to shock ha
Streszczenie treści zawartej na stronie nr. 16
Chapter 2 Opening and Closing the HP Netserver 4. Pull and lift the bezel out toward you and remove it from the chassis. See Figure 2-1. Figure 2-1. Front Bezel Location NOTE The front bezel pivots on two pins at the bottom and is held in place at the top with spring latches holding onto the top pins. The middle pins limit bezel rotation to an 80° angle. Replacing the Front Bezel 1. Place the bottom edge of the front bezel into the hinge pins at the bottom front of the chassis. 2. R
Streszczenie treści zawartej na stronie nr. 17
Chapter 2 Opening and Closing the HP Netserver Removing the Top Cover To remove the top cover, follow these steps: NOTE You do not need to remove the front bezel to remove the top cover of the Netserver. 1. If the HP Netserver is operating, log off all users and shutdown the operating system. Refer to the instructions in Chapter 1, "Controls, Ports, and Indicators." 2. Disconnect the power cord and any cables attached to the Netserver. 3. Remove the Netserver chassis from the rack a
Streszczenie treści zawartej na stronie nr. 18
Chapter 2 Opening and Closing the HP Netserver Figure 2-2. Removing the Top Cover Replacing the Top Cover To replace the top cover, follow these steps: 1. If the HP Netserver is already laying on a flat surface with no power applied, continue with Step 5. 2. If the HP Netserver was operating with the cover removed, power down the operating system and turn off the Netserver's power switch. 3. Disconnect the power cord and any cables attached to the Netserver. 4. Remove the Netserver
Streszczenie treści zawartej na stronie nr. 19
Chapter 2 Opening and Closing the HP Netserver Figure 2-3. Replacing the Top Cover 7. Install the Netserver back into the rack and secure it to the rack. Refer to the instructions in Chapters 7, 8, or 13 (depending on the rack type) to install the chassis back into the rack. NOTE Some rack options do not require removing the HP Netserver from the rack to remove or replace the top cover. 13
Streszczenie treści zawartej na stronie nr. 20
Chapter 2 Opening and Closing the HP Netserver Removing the Air Duct The air duct directs air from the fan onto the heatsinks of both processors. The air duct also restricts access to both processors and all the DIMMs, and must be removed for full access. 1. Loosen the two captive screws holding the air duct to the system board. See Figure 2-4. 2. Remove the air duct from the system board. Figure 2-4. Removing the Air Duct Replacing the Air Duct To replace the air duct, simply
