Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
VIVOTEK Table of Contents Overview 3 Read before use �������������������������������������������������������������������������������������������������������������������������������������� 3 Package contents ��������������������������������������������������
Streszczenie treści zawartej na stronie nr. 3
VIVOTEK Overview VIVOTEK’s PZ7131 (PoE) /7132 (WLAN), equipped with a pan-focus 26x � optical zoom lens, is a cost-effective pan/tilt/zoom network camera for indoor surveillance applications such as retail stores � It houses a 2�6x motorized pan-focus zoom module, which can easily zoom in and out to view near or distant objects � With a 350-degree horizontal and 125-degree vertical range of capture, it effectively gives users a wide, bird’s-eye view of any area� With our self-developed VI
Streszczenie treści zawartej na stronie nr. 4
VIVOTEK Physical Description Front Panel Lens Built-in Microphone Status LED Rear Panel Antenna (PZ7132 Only) Microphone In Ethernet 10/100 Audio Out RJ45 Socket Power Cord Socket Recessed Reset Button Mic. In Audio Ext. Int. Out 12VDC Ethernet Ext. I/O General I/O External/Internal Terminal Block Microphone Switch General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are descri
Streszczenie treści zawartej na stronie nr. 5
VIVOTEK DI/DO Diagram Please refer to the following illustration for the connection method� 12V PIN 1 Power+12V PIN 2 Digital output +12V PIN 3 Digital input PIN 4 Ground Status LED The color of LED indicates the status of the Network Camera� Status LED Color Description Blinking red Power is being supplied to the Network Camera. Steady green The Network Camera is booting up. Steady green with blinking red in between The Network Camera is trying to obtain an IP address. An IP address is succe
Streszczenie treści zawartej na stronie nr. 6
VIVOTEK Hardware Reset Mic. In Audio Ext. Int. Out 12VDC Ethernet Ext. I/O Mic. In Audio Ext. Int. Out Ethernet Ext. I/O 12VDC The reset button is used to reset the system or restore the factory default settings � Sometimes resetting the system can return the camera to normal operation � If the system problems remain after rebooting, restore the factory settings and install again� Reset: Press and release the recessed reset button with a paper clip or thin object� Wait for the Network
Streszczenie treści zawartej na stronie nr. 7
VIVOTEK Installation Hardware Installation Follow the steps below to install the Network Camera to the ceiling: 1� Attach ceiling mount bracket A to the Network Camera and secure it with two small screws� 2 Drill three pilot holes into the ceiling; hammer the plastic anchors into the holes � � 3 Fasten ceiling mount bracket B to the ceiling with three screws � � 4� Slide the Network Camera into ceiling mount bracket B� 5� Secure ceiling mount bracket A and B with a small screw � 2 4 3 1 5 A B
Streszczenie treści zawartej na stronie nr. 8
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setup the Network Camera over the Internet This section explains how to configure the Network Camera over an Internet connection� 1 If you have external devices such as sensors and alarms, connect them to the general I/O � terminal block� 2� Connect the camera to a switch via Ethernet cable� 3� Connect the supplied power cable from the Network Camera to a power outlet�
Streszczenie treści zawartej na stronie nr. 9
VIVOTEK 2� In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192168 � �03, please forward the following ports for the Network Camera on the router � � ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network page, please open the ports accordingly on your router� For information on how to forward ports on the router, please refer to your router’s use
Streszczenie treści zawartej na stronie nr. 10
PARTITION PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Set up the Network Camera through Power over Ethernet (PoE) (PZ7131 only) When using a PoE-enabled switch The Network Camera is PoE-compliant, which allows it to be powered via a single Ethernet cable� If your switch/router supports PoE, refer to the following illustration to connect the Network Camera to a PoE-enabled switch/router� power + data transmission PoE Switch When using a non
Streszczenie treści zawartej na stronie nr. 11
AP PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Set up the Network Camera through Wireless Connection (PZ7132 only) 1� Check the SSID currently set on your wireless access point (AP)� 2. Go to PZ7132's Configuration > Advanced mode > Wireless. 3 � Type in the SSID consistent with the setting on your AP � 4 Select the Wireless mode as "Infrastructure" � � 5� Click Save� The Network Camera starts to reboot� 6 W � ait for the live image is reloaded to your browser � Then, unplug the
Streszczenie treści zawartej na stronie nr. 12
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� 1� Install IW2 from the Software Utility directory on the software CD � Double click the IW2 shortcut on your desktop to launch the program� 2� The program will conduct an analysis of your network environment � After your network environment is analyzed, please click Next to continue the program� 3� The program will search for a
Streszczenie treści zawartej na stronie nr. 13
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras installed on the LAN� If your network environment is not the LAN, follow these steps to access the Network Camera: ® 1 Launch your web browser (eg � � Microsoft Internet Explorer, Mozilla Firefox, or Netscape)� 2. Ente
Streszczenie treści zawartej na stronie nr. 14
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera� For more information about how to enable password protection, please refer to Security on page 27� ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser� 1. Choose Tools > Internet Options > Security > Custom Level.
Streszczenie treści zawartej na stronie nr. 15
VIVOTEK Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following applications that support RTSP streaming� Quick Time Player Real Player VLC media player 1� Launch a RTSP player � mpegable Player 2. Choose File > Open URL. An URL dialog box will pop up. 3. The format is rtsp://:/ As most
Streszczenie treści zawartej na stronie nr. 16
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet� For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 8� To utilize this feature, please check the following settings on your Network Camera: 1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
Streszczenie treści zawartej na stronie nr. 17
VIVOTEK Using VIVOTEK Recording Software The product software CD also contains VIVOTEK’s recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras� Please install the recording software, then launch the program to add the Network Camera to the Channel list� For detailed information about how to use the recording software, please refer to the user’s manual of the software or download the manual from http://wwwvivotek � co � m� User's Manual - 17
Streszczenie treści zawartej na stronie nr. 18
VIVOTEK Main Page This chapter explains the layout of the main page� It is composed of the following sections: VIVOTEK INC. Logo, Host Name, Camera Control Area, PTZ Control Panel, Configuration Area, and Live video window� Logo of VIVOTEK INC. Host Name Camera Control Area PTZ Control Area Live View Window Configuration Area VIVOTEK INC. Logo Click this logo to visit the VIVOTEK website� Host Name The host name can be customized to fit your needs. For more information, please refer to Syst
Streszczenie treści zawartej na stronie nr. 19
VIVOTEK Pan: Click this button to start the auto pan� When the current position is Home or on the left side of Home, the camera starts panning from the current position to the left-most position, then to the right- most position, and finally backward to the original position. When the current position is on the right side of Home, the camera starts panning from the current position to the right-most position, then to the left- most position, and finally backward to the original position. St
Streszczenie treści zawartej na stronie nr. 20
VIVOTEK Video Title: The video title can be configured. For more information, please refer to Video Settings on page 52� MPEG-4 Protocol and Media Options: The transmission protocol and media options for MPEG-4 video streaming. For further configuration, please refer to Client Settings on page 22� Time: Display the current time. For further configuration, please refer to Video Settings on page 52� Title and Time: The video title and time can be stamped on the streaming video. For further co
