Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
VIVOTEK Table of Contents Overview3 Read Before Use �������������������������������������������������������������������������������������������������������������������������������������3 Package Contents �����������������������������������������������������
Streszczenie treści zawartej na stronie nr. 3
VIVOTEK Overview VIVOTEK IP7330 is a cost-effective, bullet-style network camera designed for our customers’ needs in outdoor applications� With its weather-proof IP66-rated housing, the camera is shielded from harsh conditions such as rain and dust and provides an all-in-one solution without the need for additional accessories� By integrating components for day/night functionality such as dual-band lens and built-in IR illuminators with an effective range of up to 10 meters, the camera i
Streszczenie treści zawartej na stronie nr. 4
VIVOTEK Physical Description Front Panel IR LED Lens Light Sensor Back Panel Status LED Reset Button Connectors General I/O Terminal Block Ethernet 10/100 RJ45 Plug Power Cord Socket (black) 4 - User's Manual
Streszczenie treści zawartej na stronie nr. 5
VIVOTEK General I/O Terminal Block This Network Camera provides a general I/O terminal block which is used to connect external input / output devices. The pin definitions are described below. Pin Name AV24V AC24V AV24V 24V+ DI GND AC24V 24V- DI Digital Iutput GND Ground Hardware Reset Reset Button The reset button is used to reset the system or restore the factory default settings� Sometimes resetting the system can return the camera to normal operation If � the system problems remain aft
Streszczenie treści zawartej na stronie nr. 6
VIVOTEK Installation Hardware Installation 1. Loose the liquid tight connectors, and then remove the rubber. 2� Loose the back cover� 3� Tear down the aluminum foil vacuum bag and take out the silica gel� Attach the supplied silica gel to the inner side of the Network Camera� (Please replace the silica gel with a new one if you open the back cover after installation�) 4� Make sure all cable lines are securely connected� 5. Tighten the back cover, rubber and liquid tight connectors. 6� Secur
Streszczenie treści zawartej na stronie nr. 7
PARTITION PARTITION LINK RECEIVE OW R P E COLLISION 1 2 3 4 5 LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK Network Deployment Setup the Network Camera over the Internet This section explains how to configure the Network Camera to Internet connection� 1. If you have external devices such as sensors and alarms, make the connection from the general I/O terminal block� 2� Use the supplied RJ45 female/female coupler to connect the Network Camera to a switch. Use Category 5 Cross Cable whe
Streszczenie treści zawartej na stronie nr. 8
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK 2� In this case, if the Local Area Network (LAN) IP address of your Network Camera is 192�168�0�3, please forward the following ports for the Network Camera on the router� ■ HTTP port ■ RTSP port ■ RTP port for audio ■ RTCP port for audio ■ RTP port for video ■ RTCP port for video If you have changed the port numbers on the Network page, please open the ports accordingly on your router� For information on how to forward ports on t
Streszczenie treści zawartej na stronie nr. 9
PARTITION LINK RECEIVE POWER COLLISION 1 2 3 4 5 VIVOTEK When using a non-PoE switch If your switch/router does not support PoE, use a PoE power injector (optional) to connect the Network Camera and a non-PoE switch/router� PoE Power Injector (optional) Non-PoE Switch User's Manual - 9
Streszczenie treści zawartej na stronie nr. 10
VIVOTEK Software Installation Installation Wizard 2 (IW2), free-bundled software included on the product CD, helps you set up your Network Camera on the LAN� 1� Install IW2 from the Software Utility directory on the software CD� Double click the IW2 shortcut on your desktop to launch the program� 2� The program will conduct an analysis of your network environment� After your network environment is analyzed, please click Next to continue the program� 3� The program will search for a
Streszczenie treści zawartej na stronie nr. 11
VIVOTEK Accessing the Network Camera This chapter explains how to access the Network Camera through web browsers, RTSP players, 3GPP-compatible mobile devices, and VIVOTEK recording software� Using Web Browsers Use Installation Wizard 2 (IW2) to access to the Network Cameras installed on the LAN. If your network environment is not a LAN, follow these steps to access the Network Camera: ® 1. Launch your web browser (ex. Microsoft Internet Explorer, Mozilla Firefox, or Netscape). 2. Enter th
Streszczenie treści zawartej na stronie nr. 12
VIVOTEK ► By default, the Network Camera is not password-protected. To prevent unauthorized access, it is highly recommended to set a password for the Network Camera� For more information about how to enable password protection, please refer to Security on page 24� ® ► If you see a dialog box indicating that your security settings prohibit running ActiveX ® Controls, please enable the ActiveX Controls for your browser� 1� Choose Tools > Internet Options > Security > Custom Level� ® 2. Loo
Streszczenie treści zawartej na stronie nr. 13
VIVOTEK Using RTSP Players To view the MPEG-4 streaming media using RTSP players, you can use one of the following applications that support RTSP streaming� Quick Time Player Real Player VLC media player 1� Launch a RTSP player� mpegable Player mpegable Player 2. Choose File > Open URL. A URL dialog box will pop up. 3� The format is rtsp://:/
Streszczenie treści zawartej na stronie nr. 14
VIVOTEK Using 3GPP-compatible Mobile Devices To view the streaming media through 3GPP-compatible mobile devices, make sure the Network Camera can be accessed over the Internet� For more information on how to set up the Network Camera over the Internet, please refer to Setup the Network Camera over the Internet on page 7� To utilize this feature, please check the following settings on your Network Camera: 1� Because most players on 3GPP mobile phones do not support RTSP authentication, make
Streszczenie treści zawartej na stronie nr. 15
VIVOTEK Using VIVOTEK Recording Software The product software CD also contains VIVOTEK’s recording software, allowing simultaneous monitoring and video recording for multiple Network Cameras� Please install the recording software, then launch the program to add the Network Camera to the Channel list For detailed � information about how to use the recording software, please refer to the user’s manual of the software or download the manual from http://www�vivotek�com� User's Manual - 15
Streszczenie treści zawartej na stronie nr. 16
VIVOTEK Main Page This chapter explains the layout of the main page. It is composed of the following sections: VIVOTEK INC� Logo, Host Name, Camera Control Area, Configuration Area, Menu, and Live Video Window� Logo of VIVOTEK INC. Host Name Camera Control Area Live View Window Configuration Area VIVOTEK INC. Logo Click this logo to visit the VIVOTEK website� Host Name The host name can be customized to fit your needs. For more information, please refer to System on page 22� Camera Control
Streszczenie treści zawartej na stronie nr. 17
VIVOTEK Live Video Window ■ The following window is displayed when the video mode is set to MPEG-4: MPEG-4 Protocol and Media Options Video Title Time Title and Time Video 13:32:10 2008/12/22 Video Control Buttons Video Title: The video title can be configured. For more information, please refer to Video settings on page 43� MPEG-4 Protocol and Media Options: The transmission protocol and media options for MPEG-4 video streaming. For further configuration, please refer to Client S
Streszczenie treści zawartej na stronie nr. 18
VIVOTEK Full Screen: Click this button to switch to full screen mode. Press the “Esc” key to switch back to normal mode� ■ The following window is displayed when the video mode is set to MJPEG: Video Title Time Title and Time Video 13:41:31 2008/12/22 Video Control Buttons Video Title: The video title can be configured. For more information, please refer to Video Settings on page 43� Time: Display the current time� For more information, please refer to Video Settings on page 43� Title an
Streszczenie treści zawartej na stronie nr. 19
VIVOTEK Client Settings This chapter explains how to select the stream transmission mode and saving options on the local computer. When finished with the settings on this page, click Save on the bottom of the page to enable the settings� MPEG-4 Protocol Options Depending on your network environment, there are four transmission modes for MPEG-4 streaming: UDP unicast: This protocol allows for better real-time audio and video streams� However, network packets may be lost due to network burst
Streszczenie treści zawartej na stronie nr. 20
VIVOTEK MP4 Saving Options Users can record live video as they are watching by clicking Start MP4 Recording on the main page� Here, you can specify the storage destination and file name. Folder: Specify the storage destination for the recorded video files. File name prefix: Enter the text that will be appended to the front of the video file name. Add date and time suffix to the file name: Select this option to append the date and time to the end of the file name. CLIP_20080108-180853 Date
