Instrukcja obsługi Swann Wireless Outdoor Cameras & Receiver

Streszczenie treści zawartej na stronie nr. 1

Help Desk / Support Details
English
Swann Technical Support
All Countries E-mail: tech@swann.com.au
Telephone Helpdesk
Night Hawk Camera Pack
UNITED STATES toll free
877-274-3695
(Sun-Thurs, 2pm-10.30pm PST)
2 Wireless Outdoor Cameras
800-627-2799
(Mon-Fri, 9am-1pm PST)
& Receiver
USA Exchange & Repairs
562-777-2551
Quality Surveillance with Night Vision & Audio for your
(Mon-Fri, 9am-5pm PST)
AUSTRALIA toll free
home or business
1300 13 8324
(Mon-Fri, 9am-5.30pm Aus EST)
International
+61 3 841

Streszczenie treści zawartej na stronie nr. 2

Contents Technical Specifications 2 2 Introduction Night Hawk 2.4GHz Transmitter 2 2 Your Night Hawk Camera Pack comes with Available Channels: 4 Channels in 2.4 Ghz frequency band* 3 3 Setting up your system RF Output Power: FCC, CE and C-tick compliant 4 4 Camera Features Operating Power: 8V DC 4 4 Receiver Features Power Consumption: 100mA 5 5 Changing the channel on the Night Hawk Camera 77 Size: / ”x / ”x1” (22x22x25mm) 88 5 5 Important Information about this product Antenna: Omni-direction

Streszczenie treści zawartej na stronie nr. 3

Troubleshooting, Hints and Tips Setting Up Your System Poor Picture: Realign antennas until image quality improves, slightly adjust the position of the Night Hawk Camera or Receiver. Change the location of the Camera, or use a different Camera in the location experiencing interference Camera with Stand that is on a different channel. In some cases interference may be caused by another device on a similar frequency to Large Plug the channel you are using. Change to one of the other channels and c

Streszczenie treści zawartej na stronie nr. 4

12 12 12 12 12 Camera Features Changing The Channel On The Night Hawk Camera 1. Omni-directional Antenna The Night Hawk Cameras can be switched to any of four frequencies to assist in avoiding 2. Infra-red LEDs 1 interference. Please see the illustration below for frequency settings. Unscrew the front of the camera case to gain access to the channel switch. To change the frequency/channel on the receiver, 3. Detachable Camera Stand press the button on top of the receiver to cycle through the cha