Streszczenie treści zawartej na stronie nr. 1
INSTRUCTION
MANUAL
PIR Sensor Camera
CVC5300DPVF / CVC5300DPVFW
Speco Technologies is constantly developing product improvements.
We reserve the right to modify product design and specifications without notice and without incurring any obligation. Rev. 6/20/2012
Streszczenie treści zawartej na stronie nr. 2
Contents ◑ Contents ...................................................... 1 ◑ Precautions ................................................. 2, 3 ◑ Safety Instructions ...................................... 4 ◑ Package Contents ....................................... 5 ◑ Camera Installation ..................................... 6-8 ◑ Specifications .............................................. 9 ◑ Camera Dimension ..................................... 10 ◑ Features ................
Streszczenie treści zawartej na stronie nr. 3
Precautions Do not install the camera in Do not install the camera under Do not touch the front lens of the extreme temperature conditions. unstable lighting conditions. camera. Only use the camera under conditions Severe lighting change or flicker can This is one of the most important parts of the where temperatures are between cause the camera to work improperly. camera. Be careful not to leave -10°C and +50°C. Be especially careful to provide fingerprints on the lens cover. ventilation when
Streszczenie treści zawartej na stronie nr. 4
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION CAUTION RISK OF ELECTRIC SHOCK RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT OPEN DO NOT REMOVE COVER(OR BACK). CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK NO USER-SER VICEABLE PARTS INSIDE. CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER(OR BACK). REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Streszczenie treści zawartej na stronie nr. 5
Safety Instructions Precautions for use ◑ This camera should be installed by qualified personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑ Use appropriate low voltage power cable to prevent fire or electrical shock ◑ Please insure that your installation area can support the weight of the camera Please handle this camera carefully : ◑ Do not u
Streszczenie treści zawartej na stronie nr. 6
Package Contents Please make sure that the following items are included in the Package: 1) CVC5300DPVF, CVC5300DPVFW • 1 Video Test Connector, Power Jack • 2 Wrenches • Set Screw - 3 Tapping Screws 4x25 - 2 Hexagon Socket Screws M6x20 5
Streszczenie treści zawartej na stronie nr. 7
CAMERA INSTALLATION 6
Streszczenie treści zawartej na stronie nr. 8
CAMERA INSTALLATION Compatibility 1)CVC5300DPVF, CVC5300DPVFW INTWM INTPM JB03TG 7
Streszczenie treści zawartej na stronie nr. 9
CAMERA INSTALLATION 1. CVC5300DPVF, CVC5300DPVFW BALL DOME BASE TAPPING SCREW 4X25, 3EA BALL DOME ASSEMBLY HEXAGON SOCKET SCREW M6X20, 2EA BALL DOME BODY 8
Streszczenie treści zawartej na stronie nr. 10
PIR Sensor Weatherproof Dome Camera DC Auto Iris Varifocal Lens(2.8mm-12mm) ■ CVC5300DPVF ■ CVC5300DPVFW 600TV Lines DC Auto Iris Varifocal Lens(2.8mm-12mm) True Day / Night Capability ICR-IR Cut Filter Removable White LEDs * 6pcs IR LEDs * 24pcs 0.00002Lux 512x SPECIFICATIONS MODEL CVC5300DPVF / CVC5300DPVFW 1/3” Sony Super HAD ll CCD Image Pick-Up Device NTSC, PAL TV System NTSC=811(H) * 508(V) / PAL=795(H) * 596(V) Total Pixels NTSC=768(H) * 494(V) / PAL=752(H) * 582(V) Effective Pixels NTSC=
Streszczenie treści zawartej na stronie nr. 11
CAMERA DIMENSION 1) CVC5300DPVF, CVC5300DPVFW 5.47” dia 10 4.36” 3.34” 3.70”
Streszczenie treści zawartej na stronie nr. 12
General Features ◑ Ultra High Sensitivity - The built-in high sensitivity COLOR CCD produces a clear image even in 0Lux(B/W, IR-LED ON)or lower illumination. ◑ 600TV Lines - By adopting a diagonal 6mm(1/3") 410,000 (NTSC) pixel, 470,000(PAL) pixel SONY CCD, the camera produces clear picture quality with a horizontal resolution of 600 TV lines for color and a horizontal resolution of 700TV lines for BW mode. ◑ DNR3 - The high-performance W-V DSP chip effectively removes low-light ga
Streszczenie treści zawartej na stronie nr. 13
OSD Control Button 1. Type A, Type B, Type C of OSD button could be used when it needs to OSD control. 2. Type D is extra Option (wired Remote controller) ▲ Up button: Moves the cursor upwards. Use this button to select an item or adjust the parameters. ▼ Down button: Moves the cursor downwards. Use this button to select an item or adjust the parameters. ◀ Left button: Moves the cursor to the left. Use this button to select or adjust the parameters of the selected item. Th
Streszczenie treści zawartej na stronie nr. 14
● Menu Setup 1. Press the Function Setup switch. - Main setup menu is displayed on the monitor screen. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSNR OFF 5.BACKLIGHT OFF 6.DNR3 ON 7.DAY/NIGHT AUTO 8.SPECIAL 9.EXIT SAVE 2. Select a desired function using the Function Setup switch. - Place the cursor over a desired item. 3. Set up a selected item by using the Function Setup switch. 4. To finish the setting, select 'EXIT' and press the Function Setup switch. ☞ NOTE ■ An item with the ic
Streszczenie treści zawartej na stronie nr. 15
- FOCUS ADJ : To adjust the DC lens focus correctly, you must activate the Focus Settings mode under each lens menu. Activate the Focus Settings mode, adjust the lens focus, and then deactivate the settings mode. NOTE ☞ ■ If color rolling occurs when using a DC lens, set Shutter to Fixed (---). ● Exposure Setting MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 1. When the SETUP menu screen is displayed, select 'EXPOSURE' by using the Function Setup Switch. 2. Select a desired mode using th
Streszczenie treści zawartej na stronie nr. 16
◆ AGC(AUTO GAIN CONTROL) : The higher the gain level, the brighter the screen - but the higher the noise. * OFF : Deactivates the AGC function. * LOW : Allows automatic gain control from 5.3dB to 32dB. * HIGH : Allows automatic gain control from 5.3dB to 37dB. ◆ SENS-UP : When it is night or dark, the camera automatically detects the light level and maintains a clear picture if this mode is activated. * OFF : Deactivates the SENS-UP function. *
Streszczenie treści zawartej na stronie nr. 17
※ Select one of the following 5 modes, as appropriate for your purpose. ◆ ATW : Select this when the color temperature is between 1,700˚K and 11,000˚K. ◆ OUTDOOR : Select this when the color temperature is between 1,700˚K and 11,000˚K. (sodium light inclusion) ◆ INDOOR : Select this when the color temperature is between 4,500˚K and 8,500˚K. ◆ MANUAL : Select this to fine-tune White Balance manually. Set White Balance first by using the ATW or AWC mode. After that
Streszczenie treści zawartej na stronie nr. 18
● Backlight Setting Unlike conventional cameras, the CVC5300DPVF and CVC5400DPVF are designed to deliver a distinctive subject and background at the same time, even when the subject is backlight, by using the features of the proprietary W-V DSP chip. 1. When the SETUP menu screen is displayed, select 'BACKLIGHT' by using the Function Setup switch so that the arrow indicates 'BACKLIGHT'. MAIN SETUP 1.LENS DC 2.EXPOSURE 3.WHITE BAL ATW 4.SSNR OFF 5.BACKLIGHT OFF 6.DNR3 ON 7.DAY/NIGHT AUTO 8.SP
Streszczenie treści zawartej na stronie nr. 19
BLC SETUP HLC SETUP LEVEL LOW LEVEL MIDDLE TOP 38 LIMITS NIGHT ONLY BOTTOM 109 MASK COLOR BLACK LEFT 54 MASK TONE 1 RIGHT 121 TOP 5 BOTTOM 120 Press Set to Return LEFT 5 RIGHT 172 Press Set to Return ☞ NOTE ■ Because there can be a difference in the effectiveness of HLC according to the amount of light area in the screen, optimize the installation angle for the best HLC performance. ■ When dark, the HLC is only activated when a bright light exceeding a specific size in NIGHT ONLY mode. ■ Th
Streszczenie treści zawartej na stronie nr. 20
3. Set the DNR3 mode to 'ON' and press the Function Setup switch. Then you can adjust the noise reduction level. NOTE ☞ ■ You cannot set the DNR3 to ‘ON’ or ‘OFF’ when the AGC mode of the EXPOSURE menu is ‘OFF’. ■ When adjusting the noise reduction level in the DNR3 mode, remember that the higher the level set, the more the noise level will be reduced, as will the brightness of the image. ● Day/Night Setting You can display pictures in color or black and white. 1. When the SETUP menu scree
