Streszczenie treści zawartej na stronie nr. 1
Color CCTV Camera
Operating Instructions
Model No. WV-CW864A
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
FRANÇAIS ENGLISH
Streszczenie treści zawartej na stronie nr. 2
ENGLISH VERSION For U.S.A NOTE: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This CAUTION equipment generates, uses, and can radiate radio frequency RISK OF ELECTRIC SHOCK energy and, if not installed and used in accordance with the DO NOT OPEN instruction manua
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT SAFETY INSTRUCTIONS 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water. 6) Clean only with dry cloth. 7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions. 8) Do not use near any heat sources such as radiators, heat registers, stoves, or other apparatus (including ampli- fiers) that produce heat. 9) Do not defeat the safety purpose of the polari
Streszczenie treści zawartej na stronie nr. 4
-4-
Streszczenie treści zawartej na stronie nr. 5
CONTENTS IMPORTANT SAFETY INSTRUCTIONS ............................................................................ 3 PREFACE .......................................................................................................................... 6 FEATURES ........................................................................................................................ 6 ■ Camera Cleaning ...................................................................................................
Streszczenie treści zawartej na stronie nr. 6
PREFACE The color cameras WV-CW864A are designed for instal- A newly developed 1/4" CCD makes the camera suit- lation in an outdoor video surveillance system. able for use under extremely low illumination conditions The camera incorporates the digital signal processor, as well as in daylight. pan/tilt mechanism, x22 zoom lens and RS485 commu- Setup menus allow the camera to perform surveillance nication interface in a compact outdoor enclosure. tasks by such means as motion detection, digital fl
Streszczenie treści zawartej na stronie nr. 7
Downloading or uploading the data may not work nor- ■ Camera Cleaning mally if these functions are set to ON. Even if this function is used, noise may be produced on • Alarm (see page 31) the monitor screen, or the preset position may deviate • Preset alarm (see page 33) in the course of prolonged use. • Cleaning (see page 32) In such cases, activate the refresh mode on the special • Motion detection (see page 39) 2 menu. (See page 42.) • Auto mode (see page 23) • Self return (see page 23) To us
Streszczenie treści zawartej na stronie nr. 8
10.Do not install this camera upside down. 16.Prevention of blooming and smear This camera is designed for mounting on the ceiling When the camera is aimed at a bright light source, or wall. Using this camera installed upside down, for such as a spotlight, or a surface that reflects bright example, mounted on the floor, may cause malfunc- light, smear or blooming may appear. Therefore, the tion. camera should be operated carefully in the vicinity of extremely bright objects to avoid smear or blo
Streszczenie treści zawartej na stronie nr. 9
CONSTRUCTION q w e r o t y u i !0 !1 q Alarm Input Connector u Attachment Pipe w Alarm Output Connector i Upper Base e Video Output Connector o Fall Prevention Wire r Data Port !0 Enclosure t Power Cord for Heater !1 Dome y Power Connector for Camera -9-
Streszczenie treści zawartej na stronie nr. 10
SETUP ■ Setup Menu Setup menus are shown in the diagram below. You can adapt the camera to your requirements by setting up the respective items in these menus. Menus are incorporated in a hierarchical structure, from the setup menu at the top to manual mask area selection at the bottom. These menus are described on the following pages for reference. Switches, keys and the joystick are used in the setup operations. Setup Preset Menu (P. 18) Menu Preset Setting Menu Map Menu Preset No.Setting (P.
Streszczenie treści zawartej na stronie nr. 11
Position Setting (P. 18) Preset ID Editing (P. 18) Manual Level Adjustment Preset Identification Setting Super-D2 OFF (P. 35) (Contrast) (P. 36) (P. 20) Manual Mask Area Selection Super-D2 ON (P. 35) Light Control Setting (P. 21) (P. 35) Manual Iris Adjustment (P. 35) Dwell Time Setting (P. 21) Scene File Setting (P. 21) Shutter Speed (P. 36) Gain Control (P. 36) Preset Speed (P. 22) Electronic Sensitivity Manual Level Adjustment Enhancement (P. 36) (AWC) (P. 38) Zone Number Selection (P. 27)
Streszczenie treści zawartej na stronie nr. 12
The keys (switches) to be used for setup are shown in the table below. The joystick on the connected controller may also be used for setup. The table also shows the functions and the operations of the individual controllers. For details, see the manual for the controller to be used. Switches and controls are abbreviated as SW and CTRL respectively in the table. [WV-CU550C/CJ] Function/Controller WV-CU550C/CJ WV-CU360C/CJ WV-CU161C WV-RM70 Joystick CAM SETUP CAMERA SETUP FOCUS Switch Open CAM SET
Streszczenie treści zawartej na stronie nr. 13
SQ: Starts the sequence function. ■ Setup Menu Description SR: Starts the sort function. ● Presetting PT: Starts the patrol function. (1) Position (POSITION SET) See page 23 for the setting. Aligns the camera position and focal point by pan- ning, tilting, zooming and focusing. See page 18 for the setting. ● Auto Mode (AUTO MODE) The auto mode is used for setting the movement of the (2) Preset Identification (PRESET ID) camera. Assigns the name for preset IDs (identification of up You can select
Streszczenie treści zawartej na stronie nr. 14
(2) Proportional Pan-Tilt Speed (PROPO. P/T) (9) Image Hold (IMAGE HOLD) If ON is selected, the pan-tilt speed changes auto- The camera picture remains as a still image on the matically corresponding to the zoom ratio. For monitor screen or until the camera reaches the pre- example, the pan-tilt speed slows down when the set position. This function is useful for surveillance camera zooms in. See page 28 for details. via a local area network. (3) Area Title (AREA TITLE) (10)Tilt Angle 0 °/5 ° Up
Streszczenie treści zawartej na stronie nr. 15
Generally, when a light from the background is too (6) Synchronization (SYNC) strong such as a spotlight, all objects except the You can select the internal sync (INT) mode or the main object in the picture are displayed darker line-lock sync (LL) mode. Additionally, this model because the lens iris is adjusted with respect to accepts the VD2 signal from a specified component. strong brightness. This model ignores strong bright- Whenever the VD2 signal is supplied to this camera, ness by masking
Streszczenie treści zawartej na stronie nr. 16
(9) Auto Focus (AF MODE) The camera adjusts the focus automatically by sens- ing the center of the picture. S, M and L stand for the size of the sensing area: Small, Middle and Large. See page 40 for details. MANUAL S, M, L: Auto-focus is activated only when the AF key on the controller is pressed. AUTO S, M, L: Auto-focus is activated automatically while a manual pan, tilt or zoom operation is per- formed. Note: If SENS UP is set to ON except x2 FIX or x2 AUTO, the AUTO (S/M/L) mode is disabled
Streszczenie treści zawartej na stronie nr. 17
SETTING PROCEDURES The following setting procedures are described on the ● Submenu Display assumption that this model is used in combination with The items marked O can be selected/changed on the WJ-SX550C Matrix Switcher and WV-CU550C/CJ submenu. System Controller. In case a controller other than WV- CU550C is used, refer to the table on page 12. ** RS485 SET UP ** UNIT NUMBER 1 SUB ADDRESS ----- BAUD RATE 19200 DATA BIT 8 ■ Menu Display PARITY CHECK NONE STOP BIT 1 ● Setup Menu Display XON
Streszczenie treści zawartej na stronie nr. 18
Notes: ■ Preset Menu • The * mark indicates that the position number ● Preset Menu Display has been preset. 1. Displaying the preset menu directly • The character H refers to the home position. (1) Move the cursor to PRESET 1 O and select the • The second line from the bottom shows the pre- position number with the joystick. set ID corresponding to the selected number. (2) Press the CAM (SET) key. "DOOR" next to "ID" in the example shown right is The preset setting menu appears on the monitor fo
Streszczenie treści zawartej na stronie nr. 19
3. Pan Offset 4. To Set the Lens Zoom and Focus Positions If the camera is replaced with a new one, the pan (1) Move the cursor to PUSH SET for ZOOM/FOCUS offset function is used to adjust its positions to be and press the CAM (SET) key. The ZOOM/FOCUS the same as before except patrol setting. setting menu appears. The system controller can download or upload the preset position data. ** POSITION 1*** PAN/TILT →PUSH SET Caution: The preset data for other cameras (WV- ZOOM/FOCUS →PUSH SET CW6
Streszczenie treści zawartej na stronie nr. 20
(2) Display the most prospective ID. ● Preset Identification Setting (PRESET (3) Follow the step "To Change an Entered Preset ID) ID" if necessary. 1. Move the cursor to PRESET ID on the preset setting menu and select ON or OFF with the joystick. To Change an Entered Preset ID The factory default setting is OFF. (1) Move the pointer to the character to be edited in the editing area with the joystick. PRESET NO. 1* (2) Select a new character with the joystick. POSITION SET (3) Press the CAM
