Streszczenie treści zawartej na stronie nr. 1
Operating Instructions
Color CCTV Camera
Model No. WV-CP500
WV-CP504
This illustration represents WV-CP500.
Lens: Option
Before attempting to connect or operate this product,
please read these instructions carefully and save this manual for future use.
No model number suffix is shown in this manual.
Streszczenie treści zawartej na stronie nr. 2
Preface About the user manuals The operating instructions of the camera consist of 2 sets: these operating instructions (PDF) and Installation Guide. This document explains how to configure the settings of the camera. Refer to the installation guide for further information about how to install the camera. ® ® ® ® ® Adobe Reader is required to read PDF. When the Adobe Reader is not installed on the PC, download the latest Adobe ® Reader from the Adobe web site and install it. Trademarks and
Streszczenie treści zawartej na stronie nr. 3
Contents Preface ............................................................................... 2 Back focus setting [BACK-FOCUS SETUP] ....................... 27 About the user manuals ................................................. 2 Special menu setting [SPECIAL SETUP] ........................... 29 Trademarks and registered trademarks ......................... 2 Chroma level adjustment [CHROMA GAIN] ................... 29 About the setup menus........................................
Streszczenie treści zawartej na stronie nr. 4
About the setup menus Performing each setting item in the setup menu should be completed in advance to use this unit. Perform the settings for each item in accordance with the conditions of the camera shooting area. The following is an example of setup procedure when LANGUAGE is set to ENGLISH. Setup menu list Reference Setup item Description Pages CAMERA ID This item specifies the camera title. The camera title that indicates the camera loca- tion and other information about the
Streszczenie treści zawartej na stronie nr. 5
Basic operation The description below explains how to operate the setup menu basically. The operations in the setup menu are performed with the operation buttons after calling up the setup menu on the connected video monitor. Refer to the installation guide for further information about the operation buttons. The operations in the setup menu can also be performed through the system controller (option). Screenshot 1 Hold down the setting button for approx. 2 seconds to call Step 1 up the
Streszczenie treści zawartej na stronie nr. 6
Screen transition diagram Top screen "CAMERA ID" screen MODEL WV-CP500 SERIES **CAMERA ID** CAMERA ID OFF 0123456789 CAMERA ABCDEFGHIJKLM SYSTEM NOPQRSTUVWXYZ BACK-FOCUS ().,'":;&#!?= SPECIAL +-*/%$ LANGUAGE SPACE POSI RET TOP END RESET ................ END SETUP ENABLE "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 ALC/ELC ALC SHUTTER OFF AGC ON(HIGH) SENS UP OFF WHITE BAL ATW1 DNR HIGH
Streszczenie treści zawartej na stronie nr. 7
Camera title setting [CAMERA ID] This item specifies the camera title. The camera title that indicates the camera location and other information about the camera is created with alphanumerics and symbols, and is displayed on the screen. The camera title is named with up to 16 characters. Follow the procedure below to specify the camera title. Top screen "CAMERA ID" screen Display positioning screen MODEL WV-CP500 SERIES **CAMERA ID** CAMERA ID ON 0123456789 FLOOR 1 CAMERA
Streszczenie treści zawartej na stronie nr. 8
Camera operation setting [CAMERA SETUP] The following describes the camera operation settings. The following settings can be configured on the "CAMERA SETUP" screen displayed from the top screen. Refer to page 5 for how to call up the screen. The settings configured on the "CAMERA SETUP" screen will be saved as a scene file. "CAMERA SETUP" screen **CAMERA SETUP** SCENE1 q w ALC/ELC ALC SHUTTER OFF e AGC ON(HIGH) r SENS UP OFF t y WHITE BAL ATW1 D
Streszczenie treści zawartej na stronie nr. 9
Step 5 Move the cursor to "SCENE1" and press the right or left button to select "SCENE1" to resume normal operation. Important: • When "SCENE2" is set for "ALARM IN", the "SCENE X (EXT)" indication will be displayed and it is impossible to change the scene file. * X indicates "1" or "2". 2. Light quantity control method selection [ALC/ELC] The method of contr olling the quantity of light is selected fr om the following in accor dance with the lens to be used. ALC
Streszczenie treści zawartej na stronie nr. 10
Step 2 Move the cursor to "SUPER-D5" and select the item from the following: ON (default): Activates the SUPER-D5 function all the time. (+ See below) ON (i-VMD): Activates the SUPER-D5 function all the time. (+ See below) In addition to the SUPER-D5 function, the motion detection function also works. OFF: Deactivates the SUPER-D5 function. (+ Page 11) Note: • When "ON" or "ON(i-VMD)" is selected for "SUPER-D5", the following settings will be r estricted. SHUTTER: Only OFF and 1/100 ar
Streszczenie treści zawartej na stronie nr. 11
When not using the SUPER-D5 function Follow the pr ocedur e below . Step 1 When the SUPER-D5 function is set to "OFF", bright ar eas of an image ar e masked to facilitate the visibility of dark ar eas. Move the cursor to "MASK SET" and pr ess the setting button. → The mask setting scr een appears. "ALC CONT" screen Mask setting screen Area setting screen **ALC CONT**(1) **AREA **(1) BACK LIGHT COMP POSITION PUSH SW SUPER-D5 OFF UPPER LEFT MASK SE
Streszczenie treści zawartej na stronie nr. 12
When the SUPER-D5 function is set to "OFF": OFF (1/60) (default), 1/100, 1/250, 1/500, 1/1 000, 1/2 000, 1/4 000, and 1/10 000 When the SUPER-D5 function is set to "ON" or "ON(i-VMD)": OFF (1/60) (default), 1/100 Note: • When "ALC/ELC" is set to "ELC" or "ALC+" (+ page 9), "---" appears and the electr onic shutter function cannot be activated. • If the contr oller , WV -CU254 or WV -CU204 is used, SW LED and the status of "SHUTTER" ar e not corr ectly displayed. 4. Gain control setting
Streszczenie treści zawartej na stronie nr. 13
Note: If the situation meets one of the following or other, color may not be accurately reproduced. • The subject is mostly highly-color ed. • The photographic atmospher e is under the bright blue sky or at nightfall. • The illumination of the light illuminating the subject is insuf ficient. ATW2: Activates the sodium lamp automatic color temperature tracking mode. The camera automatically achieves an optimal white balance under the sodium lamp. The adjustment of the color temper
Streszczenie treści zawartej na stronie nr. 14
Manual fine adjustment of white balance The white balance is manually fine adjusted after white balance automatically adjustment in the automatic color temperature tracking mode (ATW1, ATW2) or automatic white balance control mode (AWC). Follow the procedure below. "CAMERA SETUP" screen Fine adjustment screen **CAMERA SETUP** **ATW1**(1) SCENE1 ... ... 0 ALC/ELC ALC R | SHUTTER OFF - + AGC ON(HIGH) ... ... 0 SENS U
Streszczenie treści zawartej na stronie nr. 15
Step 1 Move the cursor to "BW MODE" and select the black-and-white control from the following: AUTO1 (default): Automatically toggles between color and black-and-white images in accordance with the screen brightness (illuminance). The black-and-white mode is selected for dark images, and the color mode is selected for bright images. AUTO2: Uses a near-infrared light source at nighttime. ON: Displays black-and-white images. OFF: Displays color images. Note: • The auto back focus func
Streszczenie treści zawartej na stronie nr. 16
9. i-VMD setting [i-VMD] The intelligent motion detection function allows the camera to detect motion and appearance/disappearance of an object or scene change with the camera. Detection of motion and appearance/disappearance of an object or scene change with the camera can be announced by issuing an alarm signal or displaying a frame on the screen. Important: • The following cir cumstances may r esult in detection failur e or false detection: Adjusting the detection ar ea a
Streszczenie treści zawartej na stronie nr. 17
a [ d c Detect motion of objects Move the cursor to "MOTION" and select from the following. ON: Provides an alarm signal when motion is detected. OFF (default): Does not detect motion. Detect objects that move continuously within a specified period Move the cursor to "LOITERING" and select the duration from the following: When a continuously moving object is detected within a specified period, an alarm signal is issued. OFF (default)/ON (5 s)/ON (10 s)/ON (20 s)/ON (30 s)/ON (40 s)/ON (50 s)
Streszczenie treści zawartej na stronie nr. 18
Perform the settings relating to the detection of appearance/disappearance of stationary objects Perform the settings relating to the detection of appearance/disappearance of stationary objects as follows. Up to 4 appearanc- es/disappearances of stationary objects can be simultaneously detected. However, use of the scene change detection function decreases the maximum simultaneous detectable appearances/disappearances of stationary objects to 3. Follow the procedure below. "CAMERA SETUP" scre
Streszczenie treści zawartej na stronie nr. 19
Set the detection areas Set the detection areas for motion detection and the detection of appearance/disappearance of stationary objects. Up to 2 detection areas can be set. Follow the procedure below. "MOTION DET" screen "OBJECT DET" screen Area setting screen **MOTION DET**(1) **OBJECT DET**(1) **AREA 1 /2**(1) MOTION OFF REMOVAL AND LEFT BEHIND LOITERING OFF POSITION PUSH SW DIRECTION OFF DURATION TIME 10s AREA SETUP UPPER LE
Streszczenie treści zawartej na stronie nr. 20
Setting of scene change detection This function detects a change in the subject state that occurs by covering the camera with a cloth, a cap, or others, or by changing the camera direction largely. Follow the procedure below. "CAMERA SETUP" screen "i-VMD SETUP" screen **CAMERA SETUP** **i-VMD SETUP**(1) SCENE1 MOTION DET ALC/ELC ALC OBJECT DET OFF SHUTTER OFF SCENE CHANGE OFF AGC ON(HIGH) SENS UP OFF INDICATOR OFF WHITE BAL ATW1 ALAR
