Streszczenie treści zawartej na stronie nr. 1
METROLOGIC INSTRUMENTS, INC.
®
MS9500 Voyager Series
Single-Line Hand-Held Laser Scanner
Installation and User’s Guide
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
LOCATIONS CORPORATE HEADQUARTERS EUROPEAN, MIDDLE EAST & AFRICAN NORTH AMERICA HEADQUARTERS USA, NEW JERSEY GERMANY, MUNICH Metrologic Instruments, Inc. Metrologic Instruments GmbH Tel: 1-800-ID-METRO Fax: 856-228-6673 Tel: 49-89-89019-0 Fax: 49-89-89019-200 Email: info@metrologic.com Email: info@europe.metrologic.com SOUTH AMERICA, BRAZIL SÃO PAULO GERMANY, MUNICH Metrologic do Brasil Ltda. Metrologic Instruments GmbH Tel: 55-11-5182-8226 Fax: 55-11-5182-8315 Tel: 49-89-89019-0 Fax:
Streszczenie treści zawartej na stronie nr. 4
TABLE OF CONTENTS Introduction........................................................................................................... 1 Scanner and Accessories..................................................................................... 2 Operation Test...................................................................................................... 4 Installing the Scanner to the Host System MS9520-00/9/11/14/41 AND MS9540-00/9/11/14/41......................................... 5
Streszczenie treści zawartej na stronie nr. 5
TABLE OF CONTENTS IR Activation ....................................................................................................... 25 Applications and Protocols ................................................................................. 26 Troubleshooting Guide ....................................................................................... 27 RS232 Demonstration Program ......................................................................... 30 Design Specifications Operation
Streszczenie treści zawartej na stronie nr. 6
Streszczenie treści zawartej na stronie nr. 7
INTRODUCTION ® The Voyager MS9500 Series single-line hand-held scanners include both the MS9520 and MS9540. ® ® The VoyagerCG MS9540 features Metrologic’s patented CodeGate technology. CodeGate is an intuitive scanning system that is ideal for all scanning applications, including menu-scanning, point-of-sale, document processing, and inventory control. CodeGate works hand-in-hand with Metrologic’s patented automatic-triggering scheme. Simply present a bar code to the scanner; the high-visibili
Streszczenie treści zawartej na stronie nr. 8
SCANNER AND ACCESSORIES BASIC KIT Part # Description MS9500 Voyager Series Scanner * 00-02544 MetroSelect Single-Line Configuration Guide MS9500 Voyager Series Single-Line Hand Held Laser 00-02410 * Scanner Installation and User’s Guide * Available on the Metrologic website - www.metrologic.com OPTIONAL ACCESSORIES Part # Description AC to DC Power Transformer- Regulated 5.2VDC @ 650 mA output. 45-45593 120V United States 45-45591 220V-240V Continental European 45-45592 220V-240V United Kingdom
Streszczenie treści zawartej na stronie nr. 9
SCANNER AND ACCESSORIES OPTIONAL ACCESSORIES Part # Description USB Power/Communication Cable, 53-53213 3 m (10’) coiled cord, long strain relief, gray USB Power/Communication Cable, 5 m (10’) coiled cord, long strain relief, gray 53-53214 Not for use with Low Speed USB scanners. Use with Full Speed USB scanners only. MX009-2** MX009 USB Converter Cable Metrologic Voltage Converter Cable MVC** +12VDC to +5.2VDC or -12VDC to +5.2VDC ** Contact a Metrologic customer service representative for addi
Streszczenie treści zawartej na stronie nr. 10
OPERATIONAL TEST 1. Connect the 10-pin RJ45 male connector into the jack on the Voyager or VoyagerCG. You will hear a ‘click’ when the connection is made. 2. Connect the L-shaped plug of the power supply into the power jack on the PowerLink cable. 3. Connect the power supply into an AC outlet. Make sure the AC input requirements of the power supply match the AC Figure 1. outlet. 4. When the Voyager is ready to scan, the green LED will turn on, the red LED will flash and Figure 2. the scanner
Streszczenie treści zawartej na stronie nr. 11
INSTALLING THE SCANNER TO THE HOST SYSTEM MS9520-00/9/11/14/41 AND MS9540-00/9/11/14/41 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connector into the jack on the Voyager or VoyagerCG. You will hear a ‘click’ when the connection is made. If the scanner is receiving power from the host system, skip to step #5. 3. Connect the L-shaped plug of the power supply into the power jack on the PowerLink cable. 4. Make sure the AC input requirements of the power supply match the AC outlet
Streszczenie treści zawartej na stronie nr. 12
INSTALLING THE SCANNER TO THE HOST SYSTEM KEYBOARD WEDGE MS9520-47 AND MS9540-47 1. Turn off the PC. 2. Connect the 10-pin RJ45 male connector into the jack on the Voyager or the VoyagerCG. You will hear a ‘click’ when the connection is made. 3. Connect the L-shaped plug of the power supply into the power jack on the PowerLink cable. If the scanner is receiving power from the host system, skip to step #5. 4. Make sure the AC input requirements of the power supply match the AC outlet. Connect th
Streszczenie treści zawartej na stronie nr. 13
INSTALLING THE SCANNER TO THE HOST SYSTEM STAND ALONE KEYBOARD 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connector into the jack on the Voyager or VoyagerCG. You will hear a ‘click’ when the connection is made. If the scanner is receiving power from the host system, skip to step #5. 3. Connect the L-shaped plug of the power supply into the power jack on the PowerLink cable. 4. Make sure the AC input requirements of the power supply match the AC outlet. Connect the power supp
Streszczenie treści zawartej na stronie nr. 14
INSTALLING THE SCANNER TO THE HOST SYSTEM INTEGRATED USB: FULL SPEED MS9520-40 AND MS9540-40 LOW SPEED POS MS9520-39 AND MS9540-39 LOW SPEED HID MS9520-38 AND MS9540-38 1. Turn off the host system. 2. Connect the 10-pin RJ45 male connector of the USB cable into the jack on the Voyager or VoyagerCG. You will hear a ‘click’ when the connection is made. 3. Connect the other end of the USB cable to the host USB port. 4. Turn on the host system. Plugging the scanner into a port on the host system doe
Streszczenie treści zawartej na stronie nr. 15
THE POWERLINK CABLE DISCONNECTING THE POWERLINK CABLE Before removing the cable from the scanner, Metrologic recommends that the power on the host system is off and the power supply has been disconnected from the PowerLink cable. Figure 8. 1. Locate the small ‘pin-hole’ on the top of the unit near the bottom of the Voyager logo. 2. Bend an ordinary paperclip into the shape shown above. 3. Insert the paperclip (or other small metallic pin) into the small ‘pin-hole’. 4. You will here a faint ‘clic
Streszczenie treści zawartej na stronie nr. 16
® THE MS9540 VOYAGERCG SERIES HOW TO USE CODEGATE AND THE MANUAL ACTIVATION MODE ® CODEGATE MANUAL ACTIVATION MODE* * This feature is not a default setting. Refer to the MetroSelect Configuration Guide for instructions on enabling the Manual Activation Mode. Figure 10a. Figure 10b. THREE MODES OF OPERATION Auto Trigger, In-Stand • Auto-triggers while in the stand • Bar code is automatically decoded and transmitted CodeGate, Out-of-Stand • CodeGate activates when removed from the stand • Bar code
Streszczenie treści zawartej na stronie nr. 17
STAND KITS c. Free Standing Kits #46-46128 a. Contains: a. Stand (MLPN 36-00454)................................Qty 1 b. Apron (MLPN 50-50440) ...............................Qty 1 d. c. Screw, M3 x 6 mm (MLPN 18-18670)............Qty 2 b. e. d. Washer, #5 x .5 OD (MLPN 18-18671)..........Qty 2 e. Stand Anchor (MLPN 50-50449) ...................Qty 1 f. f. M3 x 20 mm Set Screw (MLPN 18-18672).....Qty 1 Figure 13. Optional Hard Mount Accessory Kit #46-46351 a. This kit, used in conjunction with th
Streszczenie treści zawartej na stronie nr. 18
ASSEMBLING THE STAND There are two options for assembling the stand. The first option is a self- supporting stand that can be moved freely about on the countertop. The second option is used if the stand will be bolted or hard-mounted to the countertop. Stand Option 1: Self-Supported Stand Kit #46-46128 Apron Step 1 Slide the apron (MLPN 50-50440) over the stand (MLPN 36-00454). Stand Figure 17. Step 2 Apron Position the stand so that it sits Stand under the tab on the apron. Then secure the a
Streszczenie treści zawartej na stronie nr. 19
ASSEMBLING THE STAND Stand Option 2: Hard-Mount Kits #46-46128, #46-46351 and MS951 Stand Replacements Anchor from Step 3 Kit #46-46128 Screw the stand anchor (MLPN 50-50449) Base Assembly from onto the base assembly until it sits flush. Kit #46-46351 or MS951 Stand Base Figure 21. Step 4 Remove the logo plate on the stand by gently using an exacto knife to release the plate hook. Figure 22. Step 5 Position the stand over the base assembly. Figure 23. Step 6 Secure the stand to the base assembly
Streszczenie treści zawartej na stronie nr. 20
ASSEMBLING THE STAND Wall Mount, Option 1: For Kit #46-46433 or #46-46508 Step 1 Drill two #39 pilot holes 3.00” apart. Step 2 Attach the Wall Mount Hanger to the wall with the two #8 wood screws provided. Figure 26. Wall Mount, Option 2: Kit #46-46508 Step 1 Attach the Wall Mount Base to the Wall Mount Hanger with the two 4.8 x 13 mm self-tapping screws. Step 2 Remove one side of the protective backing from the double-sided adhesive tape. Figure 27. Step 3 Attach the tape to the back of the Wa
