Instrukcja obsługi Datalogic Scanning SH2347

Streszczenie treści zawartej na stronie nr. 1

Special Instructions for
DS1100 SH2347 and DS2200 SH2348
10 - 30 Vdc


Electrical Connections

The scanner cable is equipped with a 25-pin female D-sub connector for
connection with the power supply and input/output signals:

Figure 1 – 25-pin female D-sub connector

25-pin D-sub connector pinout
Pin Name Function
9,13 VS Power supply input voltage +
25 GND Power supply input voltage -
1 * CHASSIS Chassis Ground
2, 21 TXAUX TX RS232 Aux. Interface
3, 20 RXAUX RX RS232 Aux

Streszczenie treści zawartej na stronie nr. 2

Vext 30 Vdc max. SCANNER EXTERNAL TRIGGER Power Supply V + 5V Signal Power can be supplied to the scanner through the pins provided on the 18 EXT TRIG+ 25-pin connector used for communication with the host. 19 EXT TRIG- Ground The power must be between 10 and 30 Vdc only. Figure 4 - Input PNP command using external power SCANNER USER INTERFACE 13/9 VS V+ (10 - 30 Vdc) SCANNER EXTERNAL TRIGGER 25 GND GND 9 VS V 1 + 5V CHASSIS Signal EXT TRIG+ 18 EXT TRIG- 19 25 GND Ground Inp