Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
Quick guide Satellite dish The satellite dish must have an unobstructed path to the satel- lites. Install the satellite dish according to the instructions. If you already have a satellite dish installed, note that you will need a Universal LNB which works on the frequencies 10.70- 12.75 GHz to be able to handle digital signals. Connecting a TV and a VCR Preparing the Remote Control Antenna RF Satellite dish TV 2 1 Video SCART SCART See pages 13 and 14 if you want to connect to an analogue x sate
Streszczenie treści zawartej na stronie nr. 4
Quick guide One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. •Press opt to view the predefined channel. LNB type Select the correct LNB type for your configuration. The most common values, including Universal LNB, can be selected using the cursor left/cursor right button. LNB offset voltage If the cable from the antenna is very long, the voltage at the LNB could be too low to change the polarisation. You can increase the voltage to the LNB
Streszczenie treści zawartej na stronie nr. 5
Contents Quick guide 3 Control folder ☛ Edit channels 21 Control folder ☛ Edit satellites 24 Software end-user license 6 Control folder ☛ Timer 25 General information 8 Control folder ☛ System info 26 Remote control 9 Settings folder ☛ Antenna 27 Front and rear panel 10 Settings folder ☛ Channel 27 Installation of the Mediamaster 11 Settings folder ☛ TV 27 Preparing the remote control 11 Settings folder ☛ Access ctrl 28 Connecting the Mediamaster to the dish 11 Settings f
Streszczenie treści zawartej na stronie nr. 6
Nokia Mediamaster software end-user license IMPORTANT: READ CAREFULLY BEFORE OR USING THE SOFTWARE NOKIA CORPORATION, NOKIA HOME COMMUNICATIONS END-USER SOFTWARE AGREEMENT This Software Agreement (“Agreement”) is between You (either an individual or an entity), the End User, and Nokia Corporation, Nokia Home Communications (“Nokia”). The Agreement authorizes You to use the Soft- ware specified in Clause 1 below and which is included in this Nokia digital TV receiver. This is an agreement on end-
Streszczenie treści zawartej na stronie nr. 7
Nokia Mediamaster software end-user license 9. CONTACT DETAILS. If You want to contact Nokia BUSINESS INFORMATION, OR FOR ANY SPECIAL, in respect of this Agreement, contact Nokia at the fol- DIRECT, INDIRECT, INCIDENTAL, ECONOMIC, lowing address: COVER, PUNITIVE, SPECIAL, OR CONSEQUENTIAL DAMAGES, HOWEVER CAUSED AND WHETHER ARISING UNDER CONTRACT, TORT, NEGLIGENCE, Nokia Home Communications OR OTHER THEORY OF LIABILITY ARISING OUT OF Itämerenkatu 11-13 THE USE OF OR INABILITY TO USE THE SOFT- 00
Streszczenie treści zawartej na stronie nr. 8
General information about the Mediamaster Throughout this manual you will notice that the everyday operation of your Mediamaster is based on a series of user friendly on-screen displays and menus. These menus will help you get the most from your Mediamaster, guiding you through installation, channel selection, viewing and many other functions. All functions can be performed using the buttons on the remote control, and some func- tions can also be carried out using the buttons on the front panel.
Streszczenie treści zawartej na stronie nr. 9
Remote control This section describes how to operate the Mediamaster using the buttons on the remote control. The standby button has double functionalitys. One function is performed if you gently press the button once and the other function is performed if you hold the button down for a few seconds. Some of the functions can also be performed using the buttons on the front panel. Press once to turn the sound off/on (mute). Press and hold for a few seconds to switch the Mediamaster in and out of
Streszczenie treści zawartej na stronie nr. 10
FRONT AND REAR PANEL Front panel to put the Mediamaster in and out of standby mode LED 1 to change channels LED 2 Function LED indicator 1 LED indicator 2 ON Green - Standby Red - Locked to channel - Green (locked) / Red (not locked) Remote control feedback - Single flash SW download Continous green flashing Continous green flashing Error Continous red flashing Continous red flashing Rear panel digital audio TV SCART antenna S/PDIF digital out- for connection For connection put for connection
Streszczenie treści zawartej na stronie nr. 11
Installation of the Mediamaster The Mediamaster box should contain the following items: •the Mediamaster •a remote control with 2 AAA batteries •a SCART cable (fully connected 1.0 metre) •a mains cable •an owner’s manual with the software license agreement SCART Mains Remote Owner’s cable control manual cable About the SCART sockets The rear panel of the Mediamaster contains 2 SCART sockets (see diagram). When you connect other devices to any of these sockets, always use fully connected SCART ca
Streszczenie treści zawartej na stronie nr. 12
Installation of the Mediamaster Connecting to the TV • Connect the SCART cable between the main SCART socket on the TV and the TV SCART socket on the Mediamaster. • Connect the TV aerial to the TV. 2 1 SCART Connecting a TV and VCR Refer to your VCR’s manual for full instructions. • Connect one SCART cable from the main SCART socket on the TV to the TV SCART socket on the Mediamaster. • Connect another SCART cable from the VCR to the AUX SCART socket on the Mediamaster. • Connect the RF cable fr
Streszczenie treści zawartej na stronie nr. 13
Installation of the Mediamaster Connecting a HiFi system • Connect an RCA stereo cable from the AUDIO L R sockets on the Mediamaster to the LINE, AUX, SPARE or EXTRA input sockets on your HiFi system. • If available, you can connect a single RCA cable from the DIGITAL AUDIO socket on the Mediamaster to a HiFi system that is equipped with digital audio input. TM This output is also used for connecting to an external Dolby digital decoder. Note: To avoid interference you must use a screened audio
Streszczenie treści zawartej na stronie nr. 14
First time installation General information Once you have correctly connected the Mediamaster, you will also have to perform a “First-time installation.” During this procedure, helpful information is displayed at the bottom of the menus. Please note! The select button always confirms a selection within these menus, and pressing it will take you to the next step in the installation process. However, and this is im- portant, more than one value often has to be entered in a menu. Firstly, make all
Streszczenie treści zawartej na stronie nr. 15
First time installation One antenna/one LNB configuration Select this alternative if you have one (1) LNB mounted on the antenna. •Press opt to view the predefined channel. LNB type Select the correct LNB for your configuration. The most common values, includ- ing Universal LNB, can be selected using the cursor left/cursor right button. LNB offset voltage If the cable from the antenna is very long, the voltage at the LNB could be too low to change the polarisation. You can increase the voltage t
Streszczenie treści zawartej na stronie nr. 16
First time installation Typical connection of a two-way DiSEqC switch: • Connect the cable from the LNB that is intended for channels from the ASTRA satellite (or THOR) to the connector marked LNB 1 (A) on the switch. • Connect the cable from the HOTBIRD satellite (or SIRIUS) to the connec- tor marked LNB 2 (B). • Then, connect the antenna cable to the connector marked OUT on the switch. • Connect the other end of this cable to the ANTENNA input at the rear of the Mediamaster. For each LNB that
Streszczenie treści zawartej na stronie nr. 17
First time installation Motor antenna configuration If you have an antenna motor to control your satellite antenna you must configure the following settings. •From the “Antenna/Satellite selection” menu select option 3 “Motor Antenna Configuration” and press select. Type of motor • Select SATSCAN (ASTRA) if you have a Nokia SatScan motor. •Select DiSEqC (Hotbird) if the motor that you have is controlled by DiSEqC com- mands. LNB type • Select the correct LNB type for your configuration, e.g. “U
Streszczenie treści zawartej na stronie nr. 18
First time installation Remove limits If you need to remove the limits. When you activate this command, the motor will turn itself to the 0° (Zero) posi- tion. However, the next time you select a channel, the motor will turn to its proper position. Channel search The Channel search procedure can be carried out in five different ways. The menu will look different depending on what option you selected in the “Antenna/satellite selection” menu. If you selected “One antenna/one LNB configuration”, s
Streszczenie treści zawartej na stronie nr. 19
First time installation Advanced manual search The information that must be entered in this menu is available in satellite TV maga- zines or on the Internet. You can use this menu if you are looking for some “special” channels (i.e. non- DVB standard channels) which can only be found when you have entered the nec- essary settings here. Transponder frequency: Specify the frequency in MHz. Polarisation: Select Horizontal, Vertical, Circular left or right. Symbol rate: Enter symbol rate with the nu
Streszczenie treści zawartej na stronie nr. 20
Navi Bars General information Bookmark Bookmark name •Press select to open the Navi Bars. The Navi Bars is used for selecting TV/Radio channels and changing system set- tings. The horizontal row contains folders, for example, Astra, Settings and so on. Their names are shown in black text at the bottom of each folder. Each folder contains bookmarks. The Control folder, for example, contains book- marks for some system settings and so on. You can move a folder horizontally by pressing the cursor
