Streszczenie treści zawartej na stronie nr. 1
Operating manual
Order no.: 20210009
Streszczenie treści zawartej na stronie nr. 2
2
Streszczenie treści zawartej na stronie nr. 3
Preface Preface Dear Customer, The following operating manual will help you obtain the best optimal use from the extensive features of your new satellite receiver. We have written this operating manual as comprehensibly as possible and as concise as necessary. A brief lexicon containing specialised terms not easily translatable has been appended at the end of this manual. To further assist you in your search for a specific term, we have also added an index. We have taken the e
Streszczenie treści zawartej na stronie nr. 4
Contents Contents Preface...............................................................................................................................................................3 Contents ............................................................................................................................................................4 Safety instructions ...........................................................................................................................
Streszczenie treści zawartej na stronie nr. 5
Contents Switching to a radio programme...................................................................................................................... 23 Reception status - radio ........................................................................................................................... 23 Selecting a radio programme by number entry........................................................................................ 24 Common Interface ...............................
Streszczenie treści zawartej na stronie nr. 6
Contents Tone burst............................................................................................................................................. 63 DiSEqC ................................................................................................................................................. 63 DiSEqC Repeat..................................................................................................................................... 63 UFO mini..................
Streszczenie treści zawartej na stronie nr. 7
Safety instructions Safety instructions Important notes regarding operation The following section contains important information relating to the operation, place of installation and connection of the receiver. Read these notes carefully before putting the unit into operation. Extended absence / thunderstorms Always switch the unit off via its mains switch (at front left on unit) during periods of extended absence or at the onset of thunderstorms. This also applies to any other equipmen
Streszczenie treści zawartej na stronie nr. 8
Safety instructions Important notes for siting and installation. Place of installation Every electronic device generates heat. The rise in temperature, however, lies within a safe range. Slight colour changes may occur to sensitive furniture surfaces and veneers over the course of time due to the constant effect of heat. In conjunction with treated furniture surfaces, the unit’s rubber feet can likewise give rise to changes in colour. Where necessary place the unit on a suitable pad. Ve
Streszczenie treści zawartej na stronie nr. 9
Controls, displays and connections Controls, displays and connections This section contains a brief description of all the control elements, displays and connections. The key symbols presented here are also used when describing operating sequences. View of front panel (Flap folded down) I000 1 2 3 4 5 6 7 8 9 10 View of rear panel 1 2 3 4 5
Streszczenie treści zawartej na stronie nr. 10
Controls, displays and connections Remote control handset keys Power On - Switch over of the Standby remote control Calls up main menu/ Calls up the last 4 Adds a new channel programmes / favourite categories Programme info Last programme and EPG programme guide exit Locks channels Locks a channel Setting Scart Programme lists connection Programme info Radio Off Help Deletes a channel
Programme selection / Select
Streszczenie treści zawartej na stronie nr. 11
Command of remote control Command of remote control The remote control features 2 command sets, making it possible to operate 2 receivers independently of each other in one room (not together with a twin receiver). Note For this purpose, program one receiver on the command set 1 and the second receiver on the command set 2. Switch on receiver 1 and receiver 2 off with the mains switch Press and hold the button. Enter "901" with the number buttons. To adopt the code, press the
Streszczenie treści zawartej na stronie nr. 12
Operating instructions Operating instructions Menu concept The menu concept is set up in a logical operating sequence. The current selected programme always appears in the upper right- hand corner of the screen. Note: Observe that the toolbar on the bottom of the picture with the instructions for the respective menu point. The selected menus, submenus and menu items as well as the parameters to be set are respectively highlighted with a coloured bar. Press button to select th
Streszczenie treści zawartej na stronie nr. 13
Operating instructions Press to exit setting. In function programme list: Locks the programme
is a switch-on button with menu functions. Press the button again to exit. In function programme list: Makes a channel a favourite channel. is a function selection button for radio and TV. In the recording mode preparation of a recording. In the function programme list: Selection of mode of programme list. is a function selection button. Press button once again to change function
Streszczenie treści zawartej na stronie nr. 14
Operating instructions Alphanumeric assignments of number buttons on the remote control Button 1 x 2 x 3 x 4 x 5x 1 . , ? 1 2 A B C 2 3 D E F 3 4 G H I 4 5 J K L 5 6 M N O 6 7 P R S 7 8 T U V 8 9 W X Y Z 0 SPACE 0 SPACE 0 Language selection- OSD To select the language for the on-screen menus press: menu language English The available languages are German, English,
Streszczenie treści zawartej na stronie nr. 15
Connection and start-up Connection and start-up The following section is specifically intended for the specialist dealer. You only need to read this section if you are carrying out the installation yourself. You will find sample configurations in the section "Connection examples". First, carry out all installation work before connecting the receiver to the mains power supply. Refer to the information provided in the section "Safety instructions“. Connecting receiver Sat-IF connect
Streszczenie treści zawartej na stronie nr. 16
Connection and start-up LNB supply voltage If the feed system (LNB) is powered by an external supply voltage and the LNB supply voltage is not used for switching polarity, the LNB supply of the receiver must be set to "OFF" (see section "Installation menu, LNB configuration"). TV and video recorder connection Use a SCART cable to connect the satellite receiver (TV SCART socket) and TV set. If your TV set is equipped for stereo output, you can receive the sound in stereo via the SCART
Streszczenie treści zawartej na stronie nr. 17
First time installation First time installation The first steps Connect the receiver to the mains power supply. Switch on the receiver by pressing the power button on the front of the unit. The display, "- - - -,“ appears in the LED display. When the LED for the operating display is red, the television is in standby. Switch on the receiver by pressing the button on the remote control. The orange LED on the front panel of the receiver flashes every time a button on the remote con
Streszczenie treści zawartej na stronie nr. 18
On screen displays / OSD On screen displays / OSD Important screen displays The receiver functions are controlled by a microprocessor and an extensive software. The following explanations are intended to improve understanding of all procedures and to minimise the risk of mistakes. Press the button. Help function You can call up the help function for each menu and menu function. This help function gives you a short illustration of all the important functions of the selected menu item
Streszczenie treści zawartej na stronie nr. 19
On screen displays / OSD With the or button, exit the help function and return to the main menu. Press the button again and return to the originally received programme. TV channel identifier The channel identifier is displayed for several seconds every time the channel is changed or by pressing the button. The indicates that a channel is received even if no picture can be seen (e.g. radio). The film symbol indicates a TV channel and appears along with the time, and
Streszczenie treści zawartej na stronie nr. 20
On screen displays / OSD Programme list – Radio/TV Press the button to access the programme list. A + for the main programme list is indicated at the top left. Information about the channel, programme provider, and whether the programme is normally encrypted is found underneath. The upper-right column contains information about the received satellite, the transponder, and its frequency as well as the polarisation. The desired programme can be chosen by using the bar cursor or by num
