Streszczenie treści zawartej na stronie nr. 1
OPERATOR'S MANUAL
ROUTER TABLE
RT101 - DOUBLE INSULATED
For use only with the Ryobi R161 or R162 router (includes R1801M1 motor with R181FB1 base)
Your new router table has been engineered and manufactured to Ryobi's high standard for dependability, ease of
operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.
WARNING: To reduce the risk of injury, the user must read and understand the operator’s manual.
Thank you for buying a Ryobi route
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Introduction ........................................................................................................................................................ 2 Rules for Safe Operation ................................................................................................................................3-4 Symbols ..................................................................................................................................................
Streszczenie treści zawartej na stronie nr. 3
RULES FOR SAFE OPERATION Safe operation of this power tool requires that you read Do not abuse cord. Never carry the tool by the and understand this operator's manual and all labels cord or yank it to disconnect it from the recep- affixed to the tool. Safety is a combination of common tacle. Keep cord away from heat, oil, and sharp sense, staying alert, and knowing how your tool works. edges. Following this rule will reduce the risk of elec- tric shock or fire. READ ALL INSTRUCTIONS Polarized
Streszczenie treści zawartej na stronie nr. 4
RULES FOR SAFE OPERATION Check damaged parts. Before using the tool, a guard or other part that is damaged should be care- WARNING: fully checked to determine that it will operate properly Some dust created by power sanding, sawing, and perform its intended function. Check for align- grinding, drilling, and other construction activities ment of moving parts, binding of moving parts, break- contains chemicals known to cause cancer, birth age of parts, mounting and any other conditions that defe
Streszczenie treści zawartej na stronie nr. 5
SYMBOLS Important: Some of the following symbols may be used on your tool. Please study them and learn their meaning. Proper interpretation of these symbols will allow you to operate the tool better and safer. SYMBOL NAME DESIGNATION/EXPLANATION V Volts Voltage A Amperes Current Hz Hertz Frequency (cycles per second) W Watt Power min Minutes Time Alternating Current Type or a characteristic of current n No
Streszczenie treści zawartej na stronie nr. 6
SPECIFICATIONS Table Dimensions 14 in. x 24 in. (35.6 cm x 61 cm) Maximum Cutter Diameter 1-15/16 in. (4.9 cm) Fence Length 16 in. (40.64 cm) Miter Slot 3/8 in. x 3/4 in. x 24 in. (0.9 cm x 1.9 cm x 61 cm) Rating 120 Volts, 60 Hz, AC only Net Weight 18 lbs. (8.2 kg.) UNPACKING INFORMATION WARNING: Carefully remove the parts from the box. Make sure If any parts are missing do not operate the product that all items listed in the packing list are included. until the missing parts are replaced. Fai
Streszczenie treści zawartej na stronie nr. 7
FEATURES DOUBLE INSULATION CUTTER GUARD/VACUUM ATTACHMENT The cutter guard provides a barrier to protect the operator Double insulation is a concept in safety in electric power from contact with the cutter and is adjustable for all types tools, which eliminates the need for the usual three-wire of cuts and materials. The cutter guard also doubles as grounded power cord. All exposed metal parts are a vacuum attachment. You can insert a standard shop isolated from the internal metal motor componen
Streszczenie treści zawartej na stronie nr. 8
FEATURES CUTTER GUARD/ VACUUM ATTACHMENT FENCE MITER GAUGE SWITCH KEY SWITCH FRONT VIEW REAR VIEW Fig. 1 WARNING: Do not attempt to modify this tool or create accessories not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. 8
Streszczenie treści zawartej na stronie nr. 9
ASSEMBLY WARNING: The router or router table should never be con- nected to a power supply when you are assembling parts, making adjustments, installing or removing cutters, cleaning, or when not in use. Disconnecting the router and router table will prevent accidental starting that could cause serious personal injury. ASSEMBLING THE ROUTER TABLE Assembling the router table involves attaching the legs, the undertable guard, the switch box, the fence, the cutter guard/vacuum attachment, and the m
Streszczenie treści zawartej na stronie nr. 10
ASSEMBLY TO ATTACH THE FENCE See Figure 5. Follow these directions to attach the fence. Place the router table right side up with the back edge closest to you. Position the fence on the table with the four black knobs facing you. Align the two holes on the bottom of the fence with the two channels on the router table. Secure the fence to the table with the two fence lock knobs and carriage bolts. TO ATTACH THE CUTTER GUARD ASSEMBLY/ VACUUM ATTACHMENT See Figure 6. Follow these directions to
Streszczenie treści zawartej na stronie nr. 11
ASSEMBLY ATTACHING THE REAR SAFETY GUARD TO THE ROUTER See Figure 8. Follow these directions to attach the rear safety guard to the router. Place the rear safety guard on the back of the router. Align the slots in the guard with the holes in the router. Secure the rear safety guard to the router with the two machine screws. ATTACHING THE ROUTER TO THE TABLE Attach the router to the router table after you have assembled the table and installed the rear safety guard. Fig. 8 See Figure 9. Follow
Streszczenie treści zawartej na stronie nr. 12
ASSEMBLY MOUNTING THE TABLE TO A WORK SURFACE See Figure 10a and 10b. Follow these directions to mount the table to a work surface. Place the router table right side up on a sturdy work surface, e.g., work stand, workbench, counter top. Mark the holes with a pencil. Remove the router table. Drill four holes through the work surface. Place the router table back on the work surface, aligning the holes in the table legs with the holes in the work surface. NOTE: Position the router table surfac
Streszczenie treści zawartej na stronie nr. 13
ADJUSTMENTS ADJUSTING DEPTH OF CUT WARNING: See Figure 11. The router or router table should never be con- We recommend that cuts be made at a depth not nected to a power supply when you are assembling exceeding 1/8 in. (3.2 mm) and that several passes be parts, making adjustments, installing or removing made to reach depths of cut greater than 1/8 in. (3.2 cutters, cleaning, or when not in use. Disconnecting mm). the router and router table will prevent accidental Follow these directions to adj
Streszczenie treści zawartej na stronie nr. 14
ADJUSTMENTS INSERTING THROAT PLATES See Figure 12. The throat plate provides a stable surface around the cutter and prevents objects from falling through the throat and damaging the spindle. The proper size throat plate depends on the size and shape of the cutter. When inserted, the throat plate opening should be within approximately 1/4 in. (6.4 mm) of the outermost edge of the cutter. Follow these directions to insert throat plates. Position the throat plate over the throat opening in the rou
Streszczenie treści zawartej na stronie nr. 15
ADJUSTMENTS INSERTING THE STARTING PIN Place the starting pin on the router table and use it as a pivot point when cutting small, odd-shaped pieces. NOTE: It is not necessary to use the fence when you are using the starting pin. Additionally, only use piloted cutters when using the starting pin. See Figure 15. Follow these directions to insert the starting pin. Place the starting pin into the threaded hole to the right of the router table throat opening. Turn the pin clockwise to secure. ADJUS
Streszczenie treści zawartej na stronie nr. 16
OPERATION PERFORMING A ROUTING OPERATION WARNING: See Figure 16. When operating the router with the router table, the Follow these directions to perform a routing operation. router must only be plugged into and controlled by Read the entire Operator’s Manual. the router table switched outlet. To reduce the risk of Adjust the cutter guard so that it will not come in serious personal injury, never connect the table contact with the workpiece or cutter during a cutting mounted router into another
Streszczenie treści zawartej na stronie nr. 17
NOTES 17
Streszczenie treści zawartej na stronie nr. 18
OPERATOR'S MANUAL ROUTER TABLE RT101 - DOUBLE INSULATED **Ampere rating EXTENSION CORD CAUTION (on tool faceplate) 0-2.0 2.1-3.4 3.5-5.0 5.1-7.0 7.1-12.0 12.1-16.0 When using a power tool at a considerable distance from a Cord Length Wire Size (A.W.G.) power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An under- 25' 16 16 16 16 14 14 sized cord will cause a drop in line voltage, resulting in over- 50' 16 16 16 14 14 12 heating and l
