Streszczenie treści zawartej na stronie nr. 1
TDP-XP1
DATA PROJECTOR
OWNER’S MANUAL
In the spaces provided below, record the Model and Serial No. located at the bottom of
your projector.
Model No. Serial No.
Retain this information for future reference.
Others Maintenance Operations Preparations Before Using
Streszczenie treści zawartej na stronie nr. 2
SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is in- tended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the app
Streszczenie treści zawartej na stronie nr. 3
- Reorient or relocate the receiving antenna. - Increase the separation between the equipment and receiver. - Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. - Consult the dealer or an experienced radio/TV technician for help. RESPONSIBLE PARTY: TOSHIBA AMERICA INFORMATION SYSTEMS, INC. 9740 Irvine Blvd., Irvine, CA 92618-1697 U.S.A Phone: (949) 583-3000 CAUTION: Changes or modifications made to this equipment, not expressly appro
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT SAFETY INSTRUCTIONS CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUC- TIONS GIVEN IN THIS OWNER’S MANUAL AND THOSE MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE REFER- ENCE. This unit is fully transistorized and does not contain any parts that can be repaired by the user. WARNING: DO NOT REMOVE THE CABINET COVER, OR YOU MAY BE EX- POSED TO DANGEROUS VOLTAGE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL ONLY. 1. Read Owner’s Manual 3. Source of Light After unpacki
Streszczenie treści zawartej na stronie nr. 5
5. Heat 8. Be sure that you fir mly in- sert the plug into the wall The product should be situated away from heat sources such as outlet. radiators, heat registers, stoves, Incorrect or faulty connections or other products (including ampli- may result in fire or electric shock. fiers) that produce heat. Avoid using an unsound or loose outlet. 9. Power Cord Protection Power cords should be routed so that they are not likely to be walked on or pinched by items 6. Water and Moistur
Streszczenie treści zawartej na stronie nr. 6
IMPORTANT SAFETY INSTRUCTIONS (Continued) 11. Lightnin g storms 14. Do not p lace the product vertically For added protection for this product during a storm, or when Do not use the product in the up- it is left unattended and unused right position or any other vertical for long periods of time, unplug it positions to project the pictures. It from the wall outlet. This will pre- may fall which could result in seri- vent damage to the product due ous injury and/or damage to the to lig
Streszczenie treści zawartej na stronie nr. 7
Introduction e) The product has been dropped or 17. Accessories damaged in any way (If the cabi- Do not place this product on an net should break, please handle unstable cart, stand, tripod, brack- with care to avoid injury). et, or table. The product may fall, f) The product exhibits a distinct causing serious injury to a child change in performance, which or adult, and serious damage to indicates a need for service. the product. A product and cart combination should be moved with
Streszczenie treści zawartej na stronie nr. 8
IMPORTANT SAFETY INSTRUCTIONS (Continued) 21. Replacement Parts 24. Do not u se the product in a closed installation loca- When replacement parts are re- quired, be sure the service techni- tion. cian has used replacement parts Do not place the product in a box specified by the manufacturer or or in any other closed installation have the same characteristics as location. Otherwise it may over- the original part. heat, which could result in a risk Unauthorized substitutions may of fire
Streszczenie treści zawartej na stronie nr. 9
POWER SUPPLY INFORMATION If your line voltage is 220 to 240V, use one of the following types of cable/plug. Plug Plug configuration Plug type Line voltage configuration Plug type Line voltage Australian 200 240V EURO 220 240V 240V 10A Switzerland 200 240V UK 220 240V 240V 6A Use a 5A fuse which is approved by ASTA North American 200 240V or BSI to BSI362. 240V Always replace the fuse cover after 15A changing the fuse. IMPORTANT PRECAUTIONS Moisture Condensation Never operate thi
Streszczenie treści zawartej na stronie nr. 10
IMPORTANT PRECAUTIONS (Continued) • The set of projector is hot after use . Handle with care . • Do not use the projector while holding it in y our hands or lap . • D o n o t u s e t h e p r o j e c t o r n e a r a p o w e r s o u r c e a n d t h e l i k e , o r i n l o c a t i o n s l i k e a s h i p o r v e- hicle that are subject to vibration or shock. Doing so may lead to a malfunction or shorten service life. • Only plug the po w er cord into outl
Streszczenie treści zawartej na stronie nr. 11
OTHER INFORMATION Copyrights Showing or transmitting commercial imaging software or broadcast or cable-broad cast- ing programs with the purpose of other than the personal and private viewing, including modifying images using the freeze functions, or displaying with the varying aspect ratio of the images, could violate the direct or indirect copyrights of the imaging software or broadcast program, etc., if done without fi rst consulting with the copyright holder. For this reason, take appro
Streszczenie treści zawartej na stronie nr. 12
REMOTE CONTROL BATTERY Warning • Ne v er thro w a batter y into a fire . • Using the batter y improper ly ma y cause them to e xplode or leak and ma y result in ser i- ous injury. If battery-leaking fluid contacts skin, wash the fluid off immediately with clean water and consult a doctor. If the fluid spills on an instrument, avoid contact and wipe it off using tissue paper. Then dispose of the used tissue paper as flammable garbage after moistening it with water. • K eep t
Streszczenie treści zawartej na stronie nr. 13
CONTENTS Before Using SAFETY PRECAUTIONS ..................................................................................................2 IMPORTANT SAFETY INSTRUCTIONS ............................................................................4 POWER SUPPLY INFORMATION .....................................................................................9 IMPORTANT PRECAUTIONS ............................................................................................9 EXEMPTION CLAUSES .....
Streszczenie treści zawartej na stronie nr. 14
Specifications ...................................................................................................................42 List of general specifications ..........................................................................................42 Separately sold product ................................................................................................42 List of supported signals (RGB signals) .......................................................................43 List o
Streszczenie treści zawartej na stronie nr. 15
Checking the package contents Please make sure that the following items are included in the box, along with the main unit. If any item is missing, immediately contact the store where you purchased the product. (1) (4) (2) (5) (3) (6) (See note below) (1) Remote control (5) Power cord (2) CD-ROM (6) Carrying bag (3) Owner’s Manual (This document) (See note below) (4) RGB cable (3m) Note • The shape and n umber of supplied po w er cords v ar y depending on the product destination. • T
Streszczenie treści zawartej na stronie nr. 16
Names of each part on the main unit (2) (7) (6) (5) (4) (3) (1) (8) (5) (9) (10) (11) (12) (13) (14) (15) Back Front Name : Function (1) Lens : Projects expanded image. p.20 (2) Infrared remote sensor : Senses commands from the remote control. p.27 (3) Foot adjuster release button : Press to set up or stow the foot adjuster. (4) Air exhaust : Expels air that has grown hot inside the projector. (5) Air intake : Draws in air from outside the projector for internal cool down. p.17 (6) Control p
Streszczenie treści zawartej na stronie nr. 17
Names of each part on the control panel (1) (3) (2) (1) (8) (4) (9) (5) (6) (7) Name : Main Function Control panel (1) VOL +/- button : Adjusts the volume. (2) ENTER button : Accepts the selected mode. p.28 (3) KEYSTONE +/- button : Adjusts keystone distortion. p.31 (4) Selection buttons : Menu selections and adjustments. p.26 (5) INPUT button : Selects input source. p.24 (6) ON/STANDBY button/ : Turns the power on/off (standby). p.24 indicator : Displays power on/off mode. p.31 (7) MENU
Streszczenie treści zawartej na stronie nr. 18
Names of each part on the remote control Remote control transmitter (5) (6) (3) (7) (4) (2) (1) (1) (3) (10) (9) (11) (9) (8) Name : Main Function (1) VOL +/- button : Adjusts the volume. (2) ENTER button : Accepts the selected mode. (3) KEYSTONE +/- button : Adjusts keystone distortion. p.28 p.31 (4) Selection buttons : Menu selections and adjustments. (5) INPUT button : Selects input source. p.26 p.24 (6) ON/STANDBY button : Turns the power on/off (standby). (7) MENU button : Displays men
Streszczenie treści zawartej na stronie nr. 19
Parts on the rear panel (1) (2) (3) (4) (5) (6) (7) (8) (9) Name : Main Function (1) COMPUTER IN terminal : Input analog RGB signal from a computer or other source, or a component video signal (Y/PB/PR) from video equipment. (2) S-VIDEO terminal : Input S video signals from video equipment. (3) VIDEO terminal : Input video signals from video equipment. (4) AUDIO IN terminal : Input audio signals. (5) AUDIO OUT terminal : Outputs audio signals. (6) MONITOR terminal : Connect to a computer di
Streszczenie treści zawartej na stronie nr. 20
Approx. 7m M Preparing and using the remote control ■ Loading a coin cell battery ■ Operating the remote into the remote control control j Remove the battery hold er. Point toward the projector’s infrared remote sensor, and press a Hold down the side release firmly and pull button on the remote control. out the battery holder. • Oper ating the projector from the front Approx.15 k Load a coin cell battery (CR2025). Be sure to align the plus and minus ends of the battery properly. Note
