Streszczenie treści zawartej na stronie nr. 20
Using the menus (Continued) Note Notes • If you use the screen size setting function on commercial video software, •You can register a logo from computer input only. broadcast or cable-broadcasting programs to display images with the varying • The area that can be registered is 512 × 384 dots at the center of the screen. To aspect ratio except for the purpose of your private viewing and listening, it may register a company logo, prepare the image within the limit. infringe the copyright protecte
Streszczenie treści zawartej na stronie nr. 1
TLP-XE30
DATA PROJECTOR
OWNER’S MANUAL
In the spaces provided below, record the Model and Serial No. located at the bottom of
your projector.
Model No. Serial No.
Retain this information for future reference.
Others Maintenance Operations Preparations Before Using
Streszczenie treści zawartej na stronie nr. 2
Before Using SAFETY PRECAUTIONS The lightning flash with arrowhead symbol, within an equilateral triangle, is intended - Reorient or relocate the receiving antenna. to alert the user to the presence of uninsulated "dangerous voltage" within the product's - Increase the separation between the equipment and receiver. enclosure that may be of sufficient magnitude to constitute a risk of electric shock to - Connect the equipment into an outlet on a circuit different from that to which the receiver i
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT SAFETY INSTRUCTIONS CAUTION:PLEASE READ AND OBSERVE ALL WARNINGS AND 5. Heat 8. Be sure that you firmly INSTRUCTIONS GIVEN IN THIS OWNER'S MANUAL AND THOSE The product should be situated insert the plug into the MARKED ON THE UNIT. RETAIN THIS BOOKLET FOR FUTURE away from heat sources such as wall outlet. REFERENCE. radiators, heat registers, stoves, or Incorrect or faulty connections may other products (including This unit is fully transistorized and does not contain any parts that c
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT SAFETY INSTRUCTIONS (Continued) e) The product has been dropped or 11. Lightning storms 14. Do not place the product 17. Accessories damaged in any way (If the cabinet For added protection for this vertically Do not place this product on an should break, please handle with product during a storm, or when it unstable cart, stand, tripod, Do not use the product in the care to avoid injury) . is left unattended and unused for bracket, or table. The product may upright position or any ot
Streszczenie treści zawartej na stronie nr. 5
IMPORTANT SAFETY INSTRUCTIONS (Continued) POWER SUPPLY INFORMATION If your line voltage is 220 to 240V, use one of the following types of cable/plug. 21. Replacement Parts 24. Do not use the product in When replacement parts are a closed installation Plug Plug required, be sure the service location. configuration Plug type Line voltage configuration Plug type Line voltage technician has used replacement Do not place the product in a box Australian 200 – 240V parts specified by the EURO 220 – 24
Streszczenie treści zawartej na stronie nr. 6
IMPORTANT PRECAUTIONS (Continued) Avoid Volatile Liquid Disposal Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or This product contains substances which are harmful to humans and the environment. plastic products touching the unit for a long time as they will leave marks on the finish. • The lamp contains mercury. If cleaning with a chemically saturated cloth, be sure to follow the product's precautions. Please dispose of this product or used lamps in
Streszczenie treści zawartej na stronie nr. 7
CONTENTS Before Using Others SAFETY PRECAUTIONS .................................................................................. 2 Trouble indications ............................................................................................. 48 IMPORTANT SAFETY INSTRUCTIONS ........................................................... 4 Before calling service personnel ........................................................................ 49 POWER SUPPLY INFORMATION ........................
Streszczenie treści zawartej na stronie nr. 8
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. (4) (8) (5)(6) (3) (2)(16)(1) If any item is missing, immediately contact the store where you purchased the product. (1) (5) (6) (2) (7) (3) (10) (9) (7) (12) (13) (11) (12) (14)(15) Back Front (4) Name : Function p.19 (1) Infrared remote sensor : Senses commands from the remote control. p.26 (2) Foot adjuster release bu
Streszczenie treści zawartej na stronie nr. 9
Names of each part on the control panel and remote control Name : Main Function Control panel Remote Control (11)AUTO SET button : Sets up input from computer. p.27 p.29 (12) MUTE button : Cuts off the picture and sound temporarily. p.30 (13) FREEZE button : Pauses image. (14)Ten-Key button : Use when entering password. (12) (4) Remote Remote (9) (5) (10) Input (6) (3) control control Input items items button button (11) (2) (7) 1 [1] 7 [7] (1) 2 [2] 8 [8] (8) Battery 3 [3] 9 [9] cover (8) 4
Streszczenie treści zawartej na stronie nr. 10
Approx. 5m Names of the terminals on the rear panel Preparing and using the remote control ■ Loading dry-cell batteries ■ Operating the remote (1) (2) (3) (4) (6) (8) (9) into the remote control control q Remove the battery cover. Point toward the projector’s infrared remote sensor, and press a button on the remote control. • Operating the projector from the front Approx. 15° w Insert the dry-cell batteries. Be sure to align the plus and minus ends of the batteries properly. (5) (7) Name : Main
Streszczenie treści zawartej na stronie nr. 11
Placement Connection Placement Styles Before connection As shown in the figures below, this device can be placed in 4 different styles. • Read the owner’s manual of the device you are connecting to the projector. The factory setting is “floor-mounted front projection.” Set the [Projection mode] in the • Some computers cannot be used with or connected to this projector. p.41 p.51 Default setting 2 menu, in accordance with your needs. Check for an RGB output terminal, supported signal , etc. •Turn
Streszczenie treści zawartej na stronie nr. 12
Operations Connection (Continued) Turning the power on and off Notes ■ Connecting the power cord • When COMPUTER 2 IN terminal (also used for MONITOR OUT terminal) is used as Insert the power cord connector into 1 MONITOR OUT terminal, the signal which is input to COMPUTER 1 IN terminal is output. the AC IN socket of the projector. • Signals are output from MONITOR OUT terminal even in standby mode. However, from AUDIO OUT terminal, no audio signal is output. Insert the power cord plug into a
Streszczenie treści zawartej na stronie nr. 13
Turning the power on and off (Continued) Basic operations Notes Turn on the power. 1 p.23 Turn on the power by following the instructions in “Turning the power on” . • The start-up screen will disappear after a moment. You can dismiss the start-up screen before this by performing any operation. You can also configure the system to prevent the p.37 start-up screen from appearing. To do this, use the Display setting menu . 2 Select the language (When using the first time). • The first time you use
Streszczenie treści zawartej na stronie nr. 14
Basic operation (Continued) Using handy features 5 Projector placement angle adjustments ■ Using auto setting (For computer input only) Remote This function automatically sets up the projector to the optimum The placement angle and the height of the projected image can be adjusted by the foot Control state. It sets up sampling phase, frequency and screen position, adjuster. for each type of the input signal by using simple operations. q Lift up the front of the projector to the desired angle, th
Streszczenie treści zawartej na stronie nr. 15
Using handy features (Continued) Adjusting Keystone distortion [Auto] Notes • The icon appears while resizing. 2 Press the button. • Operating a function other than Mute will release resizing. The keystone distortion is automatically corrected. The icon appears during this • As zooming is processed digitally, the image quality is degraded in larger zoom correction. ratio. When adjustment is finished, the Keystone menu appears again. For fine adjust- • During resizing or moving the zooming are
Streszczenie treści zawartej na stronie nr. 16
Using handy features (Continued) ■ Changing screen size ■ Setting the password Remote The screen size for the projected image can be changed. How to change password Control The default password is 0000. Press the remote control’s SCREEN SIZE button. 1 Select [Password] in the Default setting 2 menu and press the or Pressing the button switches Full/Thru/Wide in turn. button. Notes 2 • Thru display is available for computer-input images. Select [Password registration] in the password registrati
Streszczenie treści zawartej na stronie nr. 17
Using handy features (Continued) How to set password (from [Off] to [On]) How to set password (from [On] to [Off]) 1 1 Select [Password] in the Default setting 2 menu and press the or Select [Password] in the Default setting 2 menu and press the or button. button. The password entry screen is displayed. 2 Select [Password setting] in the password registration, setting menu, 2 Enter the password using numeric keys of the remote control. and press the or button. 3 Select [Password setting] in
Streszczenie treści zawartej na stronie nr. 18
Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using ■ The image adjustment menu p.16 the operation buttons on the control panel (main unit side) and remote control. Use this menu to set or adjust image-related items. Items that can be set or adjusted are marked “Yes”, and those that cannot are marked “No”. (When an item is masked, it ■ How to use the menus indicates that you cannot select for the current input.) The menu shown below is for ope
Streszczenie treści zawartej na stronie nr. 19
Using the menus (Continued) ■ The display setting menu Item Description Computer Y/PB/PR Video S-video Use this menu to set screen display-related items. Position V-position Yes No No No (The items in gray color cannot be set with the current input selection.) Adjust the vertical position of the image. Clamp 1 Yes No No No Description Item Adjusts the clamp pulse position. Screen size Clamp 2 Yes No No No (Full): Display with 1024 × 768 dot resolution Adjusts the clamp pulse width. (Thru)
