Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
To avoid injuries or damage to property, please read the following precautions carefully and use the product accordingly. Failure to follow the instructions marked with this symbol may cause personal injury or even fatality. Failure to follow the instructions marked with this symbol may cause personal injury or damage to the product or property. | Power Related | Installation Related | Cleaning and Use Related | [The images here are for reference only, and are not applic
Streszczenie treści zawartej na stronie nr. 3
To disconnect the apparatus from the mains, the plug must be pulled out from the mains socket, therefore the mains plug shall be readily operable. There is a danger of electric shock or fire. Always unplug the unit by holding the power plug. Pulling the power cable may damage the inside of it. There is a danger of fire. Unplug the power plug before cleaning the product. There is a danger of electric shock or fire. | Power Related | Installation Related | Cleaning a
Streszczenie treści zawartej na stronie nr. 4
Do not install on an unstable location, or on a stand smaller than the product. Make sure to keep the product out of the reach of children. The product may fall and cause personal injury. In case of thunder/lightning, disconnect the power cord from the wall outlet. There is a danger of electric shock or fire. Make sure the product's vents are not blocked by a table cloth or curtain. An increase in the internal temperature may cause a fire. Place the product on the grou
Streszczenie treści zawartej na stronie nr. 5
This may cause electric shock or fire. If water or an alien substance enters the product, turn the pro duct off, disconnect the power cord from a wall outlet and contact a Service Center. Do not disassemble, or attempt to fix or modify the product. When the product requires repairs, contact a Service Center. Do not use or keep the product near flammable sprays or other such substances. There is a danger of fire or explosion. Do not place containers with water, vases, drink
Streszczenie treści zawartej na stronie nr. 6
When cleaning the product, disconnect the power cord and wipe the product using a soft dry cloth. Do not use any chemicals such as wax, benzene, alcohol, thinner s, insecticide, air freshener, lubricant or detergent. When not using the product for an extended period of time, disc onnect the power plug. Otherwise, this may cause heat emission from the accumulated di rt or degraded insulation, leading to electric shock or fire. Do not install the product in places with heavy dust,
Streszczenie treści zawartej na stronie nr. 7
| Product Features | Product Views | Remote Control | Product Specifications | High Mobility Design - Small Size. - Lightweight. Next Generation Backlight Light Source, LED Lamp - Effective energy saving by using low voltage. - Semi-permanent long lifetime guaranteed. | Product Features | Product Views | Remote Control | Product Specifications | Front/Upper Side 1. Indicators 6. Move/Select/Volume button
Streszczenie treści zawartej na stronie nr. 8
- TEMP (Red LED) / : Use this button to move to or select an item within a menu. - STAND BY (Blue LED) ※ Refer to the LED Indications. : Use this button to adjust the volume. 2. Lens cover 7. MENU Button Use this button to enter or exit a menu or to move 3-1. Adjustable Feet forward in a menu. You can adjust the screen position by moving the adjustable feet up and down. 8. SOURCE Button Use this button to select the external device 3-2. The holes to hold t
Streszczenie treści zawartej na stronie nr. 9
LED Indications :Light is On :Light is Blinking :Light is Off STAND BY TEMP Information This state occurs when power is supplied to the projector normally after the POWER button on the projector or the remote control has been pressed. - This state appears when the projector is preparing an operatio n after the POWER button on the projector or the remote control has been pressed. - The POWER button is pressed to turn off the projector, and the cooling system is in operation to coo
Streszczenie treści zawartej na stronie nr. 10
1. VIDEO IN Input port 5. Kensington Lock 2. VIDEO/PC AUDIO IN Input ports 6. PC IN Input port 3. Remote Control Signal Receiver 7. SERVICE Input port 4. POWER Input port 8. Headphone Input port | Product Features | Product Views | Remote Control | Product Specifications |
Streszczenie treści zawartej na stronie nr. 11
1. POWER Button ( ) 2. SOURCE Button 3. MENU Button( ) 4. Move( )/ ( )Button 5. VERTICAL KEYSTONE Button ( ) 6. INSTALL Button 7. STANDARD Button 8. P.SIZE Button 9. QUICK Button 10. MUTE Button ( ) 11. RETURN Button( ) 12. EXIT Button VOL Button ( ) 13. 14. STILL Button 15. MONITOR Button 16. P.MODE Button 17. MOVIE Button 1. POWER Button ( ) Use this button for turning the product on and off. 2. SOURCE Button Used to check or select the connection status of external devic es.
Streszczenie treści zawartej na stronie nr. 12
Used to make Menu Screen disappear. 13. VOL Button ( ) Adjusts the audio volume. 14. STILL Button Used to see still images. 15. MONITOR Button Used to set the projector to the optimal mode when used as a monitor. 16. P.MODE Button Used to select Picture Mode. 17. MOVIE Button Use this when the surroundings are dark. | Product Features | Product Views | Remote Control | Product Specifications | Design and specifications of the product may be modified wit
Streszczenie treści zawartej na stronie nr. 13
exceed the maximum number of bad pixels set by our standards. Rarely, non-displayable pixels may exist, however it does not affect the picture quality nor the lifespan of the product. Supported Display Modes Horizontal Vertical Clock Frequency Polarity Resolution Frequency (kHz) Frequency (Hz) (MHz) (Horizontal /Vertical) IBM, 640 x 350 31.469 70.086 25.175 +/- IBM, 640 x 480 31.469 59.940 25.175 -/- IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.
Streszczenie treści zawartej na stronie nr. 14
Picture Position Modes Source Picture Position (H/V) Input Mode Normal Zoom 1 Zoom 2 16:9 576i x x x x VIDEO 480i x x x x 16:9 Mode O x x O PC 4:3 Mode O x x O
Streszczenie treści zawartej na stronie nr. 15
| Basic Settings | Connecting the Power | Connecting to video equipment | Installing the Projector Install the projector so that the beam from the projector is perpendicular to the screen. Place the projector so that the lens is at the center of the sc reen. If the screen is not vertically installed, the picture on the screen may not be a rectangle. Do not install the screen in bright surroundings. If the screen is too bright, the picture on the screen will not be displ
Streszczenie treści zawartej na stronie nr. 16
Focus Ring Focus the picture on the screen using the Focus Ring. If your product is installed at a location out of the specified projection distance (refer to Screen Size and Projection Distance), the focus cannot be adjusted correctly. Leveling with Adjustable Feet For level placing of the project or, adjust the Adjustable Feet of the projector. You may adjust the level of the projector up to 3 degrees. Depending on the position of the projector, Keystone distortion of
Streszczenie treści zawartej na stronie nr. 17
Setting up the PC Environment - Check the following items before connecting your PC to your projector. 1. Click the right mouse button on the Windows desktop and click on [Properties]. tab will appear. 2. Click on [Settings] tab and set the by referring to described in the display mode table supported by this projector. You do not have to change setup. 3. Press the [Advanced] button. Another property wind
Streszczenie treści zawartej na stronie nr. 18
Process might vary depending on the type of computers or Window s versions. (For example, [Properties] appears instead of [Properties (R)] as shown in 1.) This appliance supports up to 32 bits per pixel in Color qualit y when it is used as a PC monitor. Projected images may differ from the monitor depending on monitor manufacture or Windows versions. When connecting the projector to a PC, check that PC setup complies to display settings supported by this projector. If not, there may b
Streszczenie treści zawartej na stronie nr. 19
- Connect [VIDEO IN(yellow)] input port of the projector to the VIDEO (yellow) OUT port of video equipment using the video cable. - Connect the [ ] input port of the projector to the Audio (L), Audio (R) output ports of the external device, such as a DVD, VCR or ca mcorder using an audio cable. When the connections are all completed, connect both power cabl es of the projector and the DVD, VCR, or camcorder. Using the Projector Turn on the projector, press the [SOURCE] butto
Streszczenie treści zawartej na stronie nr. 20
Connect [PC IN] port on the rear side of the projector to the m onitor output port of the PC using a PC video cable. When connections are all completed, connect both power codes of the projector and the PC. Connect the [VIDEO/PC AUDIO IN] input port of the projector to the speaker output ports of the PC using an audio cable. This product supports plug and p lay and therefore, if you use W indow XP you do not need to setup the driver on your PC. Using the Projector Turn on the p
