Instrukcja obsługi Optoma Technology Optoma H31

Streszczenie treści zawartej na stronie nr. 1

H31 - RS232 Command List
Interface
Hardware : 3 wires RS-232C
Baud Rate: 9600
Data Bits: 8
Parity: None
Stop Bits: 1
Flow Control: None
Command Sequence
Write Basic Protocol
Header: ‘*’
Address Code: ‘0’ fixed
Command Code: ASCII Text
Data: Fixed 3 digits
Terminator Code: Carriage Return
Command Sequence
Read Basic Protocol
Header ‘*’
Address Code ‘0’ fixed
Command Code ASCII Text
Data ‘?’ fixed
Terminator Code Carriage Return
Acknowledgement
Basic Protocol Return Status
Receive OK Receive OK
I

Streszczenie treści zawartej na stronie nr. 2

Function List I (IR) Function Command Power On (*1) OKOKOKOKOK Power Off * 0 IR 002 Freeze * 0 IR 007 Menu * 0 IR 008 Up * 0 IR 009 Down * 0 IR 010 Right * 0 IR 011 Left * 0 IR 012 Enter * 0 IR 013 Re-Sync * 0 IR 014 Function List II (Directly OSD Menu) Function Command Brightness * 0 IR 025 Contrast * 0 IR 026 Color * 0 IR 029 Mode * 0 IR 032 Color Temperature * 0 IR 036 Edge Mask * 0 IR 037 Brightness * 0 IR 038 Keystone * 0 IR 039 FullScreenMode * 0 IR 043 ImageMode * 0 IR 044 Phase * 0 IR 05