Streszczenie treści zawartej na stronie nr. 1
DLP™ PROJECTOR
MODEL
WD3300U
User Manual
WD3300
This User Manual is important to you.
Please read it before using your projector.
Streszczenie treści zawartej na stronie nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN : TO REDUCE THE RISK OF ELECTRIC CAUTION SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an e
Streszczenie treści zawartej na stronie nr. 3
Contents Important safeguards ........................................................................................................................4 Preparing your projector ....................................................................................................................6 Using the remote control ...................................................................................................................9 Setting up your projector .....................................
Streszczenie treści zawartej na stronie nr. 4
Important safeguards Please read all these instructions regarding your 10. Power sources projector and retain them for future reference. Follow This projector should be operated only from the all warnings and instructions marked on the projector. type of power source indicated on the marking label. If you are not sure of the type of power, 1. Read instructions please consult your appliance dealer or local All the safety and operating instructions should be power company. read before the ap
Streszczenie treści zawartej na stronie nr. 5
Important safeguards (continued) Do not insert your fingers in the space WARNING: between the lens and the cabinet. Unplug immediately if there is something The lens may shift causing injury or damage to the wrong with your projector. projector. Do not operate if smoke, strange noise or odor comes Do not block the air inlet and outlet grilles. out of your projector. It might cause fire or electric If they are blocked, heat may be generated inside the shock. In this case, unplug immediatel
Streszczenie treści zawartej na stronie nr. 6
Preparing your projector Checking accessories The following accessories are provided with this projector. Check to be sure that all of the accessories are packed in the package. Cables Power supply parts Mini D-SUB D-SUB 15-pin 9-pin Mini D-SUB D-SUB 15-pin 9-pin RS-232C cable RGB cable for PC Power cord (two) (246C597-10) (246C598-10) (246C483-10, 246C383-20) • Used for projector control by computer. Remote control parts Others • Lens cap (attached to the projector) • Terminal cover (750B
Streszczenie treści zawartej na stronie nr. 7
Preparating your projector (continued) Overview 1 Control area 1 2 7 8 2 Speaker 3 Air outlet grille 4 Lens 5 Remote control sensor (front) 6 Air inlet grille 7 Remote control sensor (rear) 8 Lamp cover 9 Terminal panel 10 Air outlet grille 3 4 5 6 9 10 Caution: Do not replace the lamp immediately after using the projector because the lamp would be extremely hot and it may cause burns. Control area 1 POWER indicator 1 4 2 COMPUTER/DVI-D/ button 5 3 ZOOM/FOCUS button 4 STATUS indicator 6 5 PO
Streszczenie treści zawartej na stronie nr. 8
Preparating your projector (continued) Bottom side 1 Adjustment feet 1 Remote control 1 Laser aperture 2 Transmission window 1 3 Wired remote control jack 4 Indicator 5 HDMI button 3 2 6 POWER button 7 COMPUTER 1, 2 buttons 4 8 ZOOM/FOCUS button 9 LENS SHIFT button 5 17 KEYSTONEAUTO POSITION 10 Mouse pointer 18 6 COMPUTER HDMIVIDEO 11 PAGE UP and PAGE DOWN buttons 19 1 DVI-D(HDCP) S-VIDEO 7 20 12 MENU button 2 ZOOM/FOCUS LENS SHIFT LASER 21 13 HOME button 8 14 END button 9 22 15 ASPECT button 29
Streszczenie treści zawartej na stronie nr. 9
Using the remote control Operational range of the remote control Front of projector Rear of projector 30° 30° 30° 30° Operate the remote control within a distance of 10 m (30 feet) from the projector, pointing the light beam at the remote control photo-sensor (front or rear) of the projector. • Keep the r emote contr ol photo-sensor out of dir ect When operating the remote control, keep the sunlight or fluorescent lamp light. distance from the remote control to the projector • Keep th
Streszczenie treści zawartej na stronie nr. 10
Setting up your projector Setting up the screen Install the screen perpendicularly to the projector. If the screen can not be installed in such a way, adjust the projection angle of the projector. (See page 11.) • Install the scr een and pr ojector so that the pr ojector’ s lens is placed at the same height and horizontal position of the screen center. • Do not install the scr een wher e it is exposed to dir ect sunlight or lighting. Light dir ectly r eflecting on the scr een makes the pro
Streszczenie treści zawartej na stronie nr. 11
Setting up your projector (continued) Adjusting the position of the projected image To adjust the positions of the projector and the screen, use LENS SHIFT button. 1. Press the LENS SHIFT button. • The LENS SHIFT menu appears at the center of the screen. LENS SHIFT 2. Press the , , or button to move the image position. FAST SELECT:ENTER • When the button is pressed, the image moves down. • When the button is pressed, the image moves up. • When the button is pressed, the image mov
Streszczenie treści zawartej na stronie nr. 12
Setting up your projector (continued) Front projection, ceiling mounting Rear projection For ceiling mounting, you need the ceiling mount Ask a specialist for installation. For details, consult kit designed for this projector. Ask a specialist for your dealer. installation. For details, consult your dealer. • The warranty on this pr ojector does not cover any damage caused by use of any non-recommended ceiling mount kit or installation of the ceiling mount kit in an improper location. • F
Streszczenie treści zawartej na stronie nr. 13
Viewing computer images A. Connecting the projector to a computer Preparation: • Make sur e that the power of the pr ojector and that of the computer ar e tur ned of f. • W h e n c o n n e c t i n g t h e p r o j e c t o r t o a d e s k t o p c o m p u t e r , d i s c o n n e c t t h e R G B c a b l e t h a t i s c o n n e c t e d t o t h e m o n i t o r . Computer For analog connection: (For using the COMPUTER/COMPONENT VIDEO IN-1 terminal.) COMPUTER/ 1.
Streszczenie treści zawartej na stronie nr. 14
Viewing computer images (continued) For monitor connection: 1. Connect the RGB cable from the monitor to the MONITOR Monitor OUT terminal of the projector. • No video signal is output fr om the MONITOR OUT terminal during power standby. 1 MONITOR OUT RGB cable For audio output connection: 1. Connect one end of a commercially available audio cable to the AUDIO OUT terminal of the projector. 2. Connect the other end (white and red) of the audio cable to the audio input terminals (L, R) of
Streszczenie treści zawartej na stronie nr. 15
Viewing computer images (continued) C. Installing the terminal cover This projector includes a terminal cover. If necessary, install the terminal cover to the projector. 1. Fit two hooks of the terminal cover into the projector. 2. Tighten the attachment screws (a) firmly. Important: • Don’t carry the projector by the terminal cover. (a) EN-15
Streszczenie treści zawartej na stronie nr. 16
Viewing computer images (continued) D. Projecting images Preparation: • Remove the lens cap. Main power switch POWER button POWER indicator POWER button STATUS indicator COMPUTER 1, 2 buttons DVI-D(HDCP) ENTER button button ZOOM/FOCUS button COMPUTER/ LENS SHIFT button DVI-D button , , , buttons , , , buttons ZOOM/FOCUS button ENTER button LENS SHIFT button 1. Put the projector into standby mode by pressing the main power switch. The POWER indicator lights up red. • If the pr ojec
Streszczenie treści zawartej na stronie nr. 17
Viewing computer images (continued) 9. Press the ZOOM/FOCUS button to display the ZOOM/FOCUS menu. 10. Adjust with the or button to get an approximate size. • When the ENTER button is pr essed while the ZOOM/FOCUS menu is displayed, the adjustment mode is switched between FAST and STEP. When FAST is selected, the speed of zoom controlled by the or button becomes fast, and it becomes slow when STEP is selected. 11. Press the LENS SHIFT button. The LENS SHIFT menu appears at the center
Streszczenie treści zawartej na stronie nr. 18
Viewing computer images (continued) AV mute The video and audio signals are temporarily muted when the AV MUTE button is pressed. To cancel muting, press the AV MUTE button again. • It takes several seconds befor e muting is completely canceled. • If A V MUTE MODE in the INST ALLA TION menu is set to IMAGE, the splash scr een will appear when the A V MUTE button is pressed. • Y ou can alter the splash scr een optionally . See page 37. • The audio fr om the AUDIO OUT terminal is also mut
Streszczenie treści zawartej na stronie nr. 19
Viewing computer images (continued) Setting the aspect ratio You can change the aspect ratio of the input video signal (or the ratio of width to height of the image). Change the setting according to the type of the screen to be used or your preference. How to change the settings: With the remote control: 1. Press the ASPECT button. • Every time the ASPECT button is pr essed, the aspect mode changes fr om NORMAL (FULL) to NORMAL (16:9), to NORMAL (4:3), to 16:9, to REAL, to FULL, and back to
Streszczenie treści zawartej na stronie nr. 20
Viewing video images A. Connecting the projector to video equipment Preparation: • Make sure that the power of the projector and that of the video equipment are turned off. Connecting to a video player, etc. Video player, or the like 1. Connect one end of a commercially available video cable to the VIDEO IN terminal of the projector. To video To audio 2. Connect the other end of the video cable to the video output output terminal 2 terminals output terminal of the video equipment. 3. Connect
