Streszczenie treści zawartej na stronie nr. 1
LCD PROJECTOR
MODEL
SE1U
User Manual
SE1
Others Maintenance Operations Preparations Before Using
Streszczenie treści zawartej na stronie nr. 2
IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK Please read all these instructions regarding your LCD projector and retain them for future DO NOT OPEN reference. Follow all warnings and instructions marked on the LCD projector. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, 1. Read instructions DO NOT REMOVE COVER (OR BACK) All the safety and operating instructions should be read before the appliance is operated. NO USER-SERVICEABLE PARTS INSIDE 2. Retain instructions REFER SERVICING TO QUAL
Streszczenie treści zawartej na stronie nr. 3
IMPORTANT SAFEGUARDS (Continued) 11. Power-cord protection WARNING: Power-supply cords should be routed so that they are not likely to be walked on or Unplug immediately if there is something wrong with your projector. pinched by items placed upon or against them. Pay particular attention to cords at Do not operate if smoke, strange noise or odor comes out of your projector. It may cause plugs, convenience receptacles, and points where they exit from the appliance. Do fire or electric shock. In
Streszczenie treści zawartej na stronie nr. 4
IMPORTANT SAFEGUARDS (Continued) ABOUT LAMP The lamp is designed to project the image on the LCD panels. When the lamp no longer Place of installation functions, replace it with a new one. For safety’s sake, do not use the projector at any place subjected to high temperature and high humidity. Please maintain an operating temperature, humidity, and altitude as Caution: specified below. • Do not remove the lamp immediately after using the projector. You may get burned • Operating temperature: b
Streszczenie treści zawartej na stronie nr. 5
LABEL LOCATIONS POWER SUPPLY CORD SELECTION If your line voltage is 220 to 240V, use one of the following types of cable. Plug Plug CAUTION Label configuration Plug type Line voltage configuration Plug type Line voltage MODEL NO. / Australian 200 – 240V EURO 220 – 240V RATING Label 240V 10A E166452 Switzerland 200 – 240V UK 220 – 240V 240V 6A Use a 5A fuse which is approved by ASTA North American 200 – 240V or BSI to BSI362. 240V Always replace the fuse cover after SERIAL NO. Label 15A changin
Streszczenie treści zawartej na stronie nr. 6
IMPORTANT PRECAUTIONS (Continued) EXEMPTION CLAUSES • Mitsubishi Corporation bears no responsibility in the case of damages arising from Avoid Volatile Liquid natural disaster such as earthquakes, lightning, etc., fire not liable to Mitsubishi Do not use volatile liquids, such as an insect spray, near the unit. Do not leave rubber or Corporation, operating by third parties, other accidents, or use under abnormal conditions plastic products touching the unit for a long time. They will leave ma
Streszczenie treści zawartej na stronie nr. 7
CONTENTS Before Using Others IMPORTANT SAFEGUARDS .......................................................................... 3 Trouble indications ......................................................................................... 35 ABOUT LAMP .................................................................................................. 7 Before calling service personnel .................................................................... 36 ABOUT REMOTE BATTERIES ....................
Streszczenie treści zawartej na stronie nr. 8
Preparations Checking the package contents Names of each part on the main unit Please make sure that the following items are included in the box, along with the main unit. If (4) (3) (2) (1) (10) any item is missing, please contact the store immediately where you purchased the product. (4) (1) (4) (7) (9) (5) (8) (2) (5) (8) (5) (6) (7) (1) (11)(12)(13) (11) (14)(15)(16)(17)(18)(19) (3) (6) (9) (10) (See note) (1) Remote control (6) AC power cord Name : Function (2) R03 (SIZE AAA) batteri
Streszczenie treści zawartej na stronie nr. 9
Approx. 5m Approx. 5m Names of each part on the control panel and remote control Preparing and using the remote control Control panel Remote Control Loading dry-cell batteries Operating the remote into the remote control control CLASS 1 LED PRODUCT q Remove the battery cover. Point the remote control toward the projector’s infrared remote sensor, and press a button on the remote control. • Operating the projector from the front (7) (8) (9) (10) FAN TEMP LAMP POWER SOURCE ON / STANDBY w Inser
Streszczenie treści zawartej na stronie nr. 10
Placement Connection Placement Styles Before connection As shown in the figures below, this device can be placed in 4 different styles. • Read the user manual of the device to connect to the projector. The factory setting is “floor-mounted front projection.” Set the placement style in the • Some types of computer cannot be used or connected to this projector. p.30 p.38 default setting menu , in accordance with your needs. Check for an RGB output terminal, supported signal , etc. • Turn off the p
Streszczenie treści zawartej na stronie nr. 11
Operations Turning the power on and off Connecting the AC power cord Turning the power off Insert the AC power cord connector into the AC IN socket of the projector. 1 1 Press the ON/STANDBY button. A message appears on the screen, confirming that you wish to shut off the power. This Insert the AC power cord plug into a wall or other power outlet. 2 message will disappear after a moment. (This operation is no longer valid after the When the power cord is plugged in, the following message dis
Streszczenie treści zawartej na stronie nr. 12
Basic operations 5 Turn on the power. Projector placement angle adjustments 1 p.20 Turn on the power by following the instructions in “Turning on the power” . The placement angle and the height of the projected image can be adjusted by the foot adjuster. 2 Select the language and the lamp power (When using the 1 q Lift up the front of the projector to first time). the desired angle, then press the foot adjuster release button. When the projector is used for the first time after purchase, menu fo
Streszczenie treści zawartej na stronie nr. 13
Using handy features Using auto positioning (Auto Positioning) Correcting the keystone distortion (Keystone) p.23 This function sets up the projector to the optimum state for When the foot adjuster is used to change the Remote Control panel each type of the input signal by using simple operations. Control projection angle, the picture will undergo keystone (trap- Remote FAN TEMP LAMP POWER Control panel Control ezoidal) distortion. 1 Press the AUTO POSITION button. SOURCE ON / STANDBY FAN T
Streszczenie treści zawartej na stronie nr. 14
Using handy features (Continued) Cutting off the picture and sound temporarily (Mute) Expanding the picture size (Expand) When you want to project the images of another projector, overhead The image being projected can be expanded. projector, etc. temporarily, this projector’s images and sound can be 1 Press the remote control’s EXPAND button. turned off. The expanding ratio is increased each time the EXPAND button is pressed. Remote Press the remote control’s MUTE button. Control The pict
Streszczenie treści zawartej na stronie nr. 15
Using handy features (Continued) Using the menus You can call up on-screen menus, and conduct a number of adjustments and settings using Displaying Information [Status display] p.16 the operation buttons on the control panel (main unit side) and remote control. This displays information about the input signal, lamp use time, etc. Press the button twice (or press the CALL button on the remote How to use the menus control once). The menu shown below is only for operation instructions and mig
Streszczenie treści zawartej na stronie nr. 16
Using the menu (Continued) The display setting menu The image adjustment menu Use this menu to adjust image-related items. Use this menu to set screen display-related items. Items that can be adjusted are marked with “Yes”, and those that cannot are marked with “No”. Description Item Item Description Computer Y/PB/PR Video S-video Screen size Contrast Lower Higher Yes Yes Yes Yes (Full): Display with LCD panel’s resolution Brightness Darker Brighter Yes Yes Yes Yes (Thru): Display with s
Streszczenie treści zawartej na stronie nr. 17
Maintenance Air filter cleaning Lens and main unit cleaning The air filter prevents dust and debris from getting inside the projector. Never run the WARNING projector with the filter removed. It is recommended that the air filter is cleaned regularly. • The icon message “Check the air filter for dirt.” is displayed every 100 hours. (If the • Request cleaning and maintenance of a ceiling-mounted unit from your projector usage time exceeds 100 hours, this message is displayed for 30 seconds when
Streszczenie treści zawartej na stronie nr. 18
Others Lamp replacement (Continued) Trouble indications The indicator lights inform you of internal abnormalities. Remove the lamp cover. 3 1 FAN TEMP LAMP POWER Loosen the 2 screws, then pull up to the 3 No power direction of the arrow with your fingers on the ⇒ Problem with projector (Off) area shown in the figure to remove the lamp • Unplug the AC power cord, and contact your dealer. cover. 2 FAN TEMP LAMP POWER Lamp went out during use, or won’t come on ⇒ Lamp temperature is high so that it
Streszczenie treści zawartej na stronie nr. 19
Before calling service personnel Specifications If you think something is wrong, check the followings before contacting customer service. List of general specifications p.35 Please see “Trouble indications” as well. Item Specification If This Happens Check Type LCD Projector No power • Is the AC power cord plugged in? Is it connected to the projector? p.35 Model SE1U • Is the lamp cover loose? Rated Input 2.4 A p.35 Power goes out • Is the ambient temperature high? Rated Power Supply 100 -
Streszczenie treści zawartej na stronie nr. 20
Specifications (Continued) List of supported signals (RGB signals) List of supported signals (Y/PB/PR signals) This projector supports the following RGB signals. Note, however, that depending on the Signal format fh(kHz) fv(Hz) computer model, the screen may show flicker or streaking. Please adjust the projector if 480i(525i)@60Hz 15.73 59.94 this happens. 480p(525p)@60Hz 31.47 59.94 p.24 (Press the AUTO POSITION button, and adjust automatically or manually. ) 576i(625i)@50Hz 15.63 50.00 5
