Streszczenie treści zawartej na stronie nr. 1
LCD
Projector
User Manual
X 5 0
X 7 0
MODEL LVP-X50U / LVP-X70U
EN – 1
ESPAÑOL ITALIANO DEUTSCH FRANÇAIS ENGLISH
Streszczenie treści zawartej na stronie nr. 2
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock. The exclamation point within an equi
Streszczenie treści zawartej na stronie nr. 3
Contents Important safeguards ...........................................................................4 Overview ............................................................................................... 6 Using the remote control ......................................................................8 Battery installation ......................................................................................................... 8 Installation ...............................................
Streszczenie treści zawartej na stronie nr. 4
Important safeguards 10. Power sources Please read all these instructions regarding your LCD This projector should be operated only from the projector and retain them for future reference. Follow type of power source indicated on the marking all warnings and instructions marked on the LCD pro- label. If you are not sure of the type of power, jector. please consult your appliance dealer or local power company. 1. Read instructions All the safety and operating instructions should 11. Power-cord pr
Streszczenie treści zawartej na stronie nr. 5
Do not turn off the main power WARNING: Unplug immediately if there is abruptly or unplug the projector something wrong with your projector. during operation. Do not operate if smoke, strange noise or odor comes It can lead to lamp breakage, fire, electric shock or out of your projector. It might cause fire or electric other trouble. It is best to wait for the fan to turn off shock. In this case, unplug immediately and contact before turning main power off. your dealer. Place of installation Nev
Streszczenie treści zawartej na stronie nr. 6
Overview 10 9 7 6 5 8 1 Air inlet grill (Front) 2 Front height adjuster button 3 Air inlet grill (Side) 4 Terminal board 5 Speaker 6 Remote control sensor (Front) 7 Zoom ring 8 Focus ring 9 Control panel 10 Lens 11 Kensington Security Lock Standard connector 14 2 3 12 Remote control sensor (Rear) 13 Air outlet grill 12 13 11 Control panel 1 LAMP indicator 2 TEMP (temperature) indicator 3 + , – (VOLUME) button 12 11 10 9 8 4 VIDEO button 5 MENU button AUTO POSITION 6 ENTER button POWER MUTE 7 Dir
Streszczenie treści zawartej na stronie nr. 7
Bottom side 3 1 Adjustment foot (right and left) 2 Lamp cover 3 Adjustment foot (up and down) Caution: Do not replace the lamp right after using the projector. The lamp is very hot. 2 1 1 Transmitter indicator Remote control 2 Power button 3 COMPUTER button 1 4 Mouse button 5 Right click button (For mouse) 2 16 POWER MUTE 6 MENU button COMPUTER VIDEO 7 AUTO POSITION button 3 15 MOUSE LASER 8 PinP button (For LVP-X70U only) 14 9 + , – (VOLUME) buttons 10 EXPAND button 4 11 STILL button 12 ENTER b
Streszczenie treści zawartej na stronie nr. 8
Using the remote control Battery installation Use two AAA size batteries. 1. Remove the back cover of the remote control by pushing the battery compartment door in the direction of the arrow. 2. Load the batteries making sure that they are positioned correctly (+ to +, and - to -). • Load the batteries from - spring side, and make sure to set them tightly. 3. Replace the back cover. 12 3 Important: • Do not combine a new battery with an old one. • Load batteries in the correct position. • Do not
Streszczenie treści zawartej na stronie nr. 9
H Installation Orientation of the projector Picture size can be set by changing the distance between the screen and the projector. Front projection To find the approximate distance be- tween the projector and screen: Multiply the width of the screen screen 5 1.7 (min.) , Multiply the width of the screen 5 2.4 (max.). ¥ Refer to the chart for recommended distances in maximum zoom and minimum zoom. (between the screen and L the head of the projector) Distance from screen (L) / (appro
Streszczenie treści zawartej na stronie nr. 10
Basic connections This projector can be connected to equipment such as PC, VCRs, video cameras and DVD players. Important: • Make sure that your equipment is turned off before connection. • Plug in firmly and unplug by holding the plug, not by pulling the AC power cord. • If connected units are set too close to one another, the image may be affected. • Refer to the user manual of each component for details of connections. Projector + AV equipment Important: • Match the color of video and audio p
Streszczenie treści zawartej na stronie nr. 11
Projector + Personal computer Connection For IBM PC or IBM PC compatibles When outputting to both a PC monitor and the projector. computer RGB cable for PC to COMPUTER OUT to PC (optional) monitor to AUDIO IN PC audio cable to PC audio output (optional) to COMPUTER IN to monitor port RGB cable for PC For Macintosh When outputting to both a PC monitor and the projector. Monitor Conversion Monitor cable adapter (optional) (optional) to PC monitor to COMPUTER OUT to AUDIO IN to PC audio PC au
Streszczenie treści zawartej na stronie nr. 12
Preparing the projector for operation Getting ready for projection Adjusting the angle of projection 1. Connect the power cord provided to the projector. For the best result, project onto a flat screen with a 90 2. Connect the power cord to the wall power outlet. degree angle to the floor. If necessary, tilt the projector 3. Remove the lens cap. by adjusting two foot adjustments on the bottom of the projector. Warning: • Do not look directly into the lens when projector is “ON”. • The lens cap i
Streszczenie treści zawartej na stronie nr. 13
To operate projector power ON 2 • 9 MUTE button MAIN S-VIDEO COMPUTER OUT COMPUTER IN POWER MUTE USB RS-232C VIDEO IN VIDEO COMPUTER VIDEO 3 • 7 • 8 MOUSE LASER 4 AUDIO L (MONO) AUDIO R 4 AC IN AUTO POSITION button 3 • 7 • 8 4 R-CLICK MUTE button MENU ENTER AUTO POSITION POWER MUTE AUTO POSITION STILL AUTO POSITION STILL button COMPUTER P in P EXPAND button LAMP SOURCE –+ VOLUME VIDEO VOLUME MENU TEMP ENTER 1. Turn on the equipment connected to the projector. • When the lamp indicator is bli
Streszczenie treści zawartej na stronie nr. 14
To operate projector power ON (Continue) • The volume control bar will disappear about 4 Turning off the projector seconds after releasing the volume buttons. 7. Press the POWER button. • The volume buttons do not work when MENU The message “POWER OFF? YES : PRESS AGAIN” selection bar or MENU is displayed. appears on the screen. • The volume from the audio output terminals are not • To exit from this mode, press any button except changed. POWER, LASER, mouse pointer, R/L-click, STILL and VOLUME
Streszczenie treści zawartej na stronie nr. 15
Menu operation IMAGE CONTRAST – 30 RED – 10 BRIGHTNESS – 30 GREEN – 10 COLOR MATRIX 1 BLUE – 10 2 YELLOW – 10 USER 3 CYAN – 10 USER MAGENTA – 10 OFF COLOR TEMP. STANDARD CONTRAST R – 30 HIGH CONTRAST B – 30 LOW BRIGHTNESS R – 30 USER BRIGHTNESS B – 30 SHARPNESS – 10 TINT – 10 (Displays only when the source is selected to VIDEO) COLOR – 10 (Displays only when the source is selected to VIDEO) INSTALLATION IMAGE REVERSE OFF, MIRROR, INVERT, MIRROR INVERT KEYSTONE – 15˚ (For LVP-X70U) AUTO POWER ON
Streszczenie treści zawartej na stronie nr. 16
Menu operation (continued) 1 IMAGE CONTRAST ........ Adjusts the picture contrast. The contrast becomes higher Opt XGA60 as the number increases. IMAGE BRIGHTNESS .... Adjusts image brightness. The image becomes brighter as CONTRAST 0 the number increases. BRIGHTNESS 0 COLOR MATRIX. ......Adjusts color balance in each color of the image. See page COLOR MATRIX USER 18. COLOR TEMP. STANDARD COLOR TEMP... . Adjusts color temperature. See page 18. SHARPNESS 0 SHARPNESS ...... Adjusts the picture sha
Streszczenie treści zawartej na stronie nr. 17
4 SIGNAL MEMORY CALL ........Use to select AUTO, USER 1 or USER 2. See below. Opt XGA60 HORIZ. POSITION ....Use to adjust the horizontal position of the image. SIGNAL VERT. POSITION .....Use to adjust the vertical position of the image. A MEMORY CALL AUTO U FINE SYNC. ....... Use to synchronize the projector with PC input signals so HORIZ. POSITION 208 that the image is not blurred. VERT. POSITION 22 TRACKING ......... Use to avoid image noise such as wide stripes. FINE SYNC. 24 COMPUTER INPUT .
Streszczenie treści zawartej na stronie nr. 18
Picture adjustment Adjusting the image When using the setting which has been already You can adjust the picture by using the IMAGE menu. prepared 3. Press the $ or % button to select 1, 2, or 3. Opt XGA60 • Select 1, 2 or 3 in the color matrix adjustment at your option. Selecting VIDEO input automati- IMAGE cally selects 1 and selecting COMPUTER input CONTRAST 0 automatically selects 3. 2 is recommended for BRIGHTNESS 0 images with high color temperature. COLOR MATRIX USER • Select OFF when not
Streszczenie treści zawartej na stronie nr. 19
Top part of image curves : Adjustment from personal computer Change the setting of HOLD in SIGNAL menu or Although this projector sets proper signal systems PLL in SIGNAL - USER menu. automatically for the image signal from personal HOLD ...Select ON, and adjust BEGIN or computers, it cannot be applied to some of personal END for image which top part is the computers. In this case, press the AUTO POSITION least curved. button. If the images are still not projected
Streszczenie treści zawartej na stronie nr. 20
Picture adjustment (continued) Specification of RGB signals in each computer mode of the projector Signal mode resolution horizontal Vertical Normal mode Real mode (H x V) frequency (kHz) frequency (Hz) (H x V) (H x V) TV60 – 15.73 59.94 1024 x 768 – TV50 – 15.63 50.00 1024 x 768 – 1080i – 33.75 60.00 1024 x 576 – 720p – 45.00 60.00 1024 x 576 – PC98 640 x 400 24.82 56.42 1024 x 640 640 x 400 CGA70 640 x 400 31.47 70.09 1024 x 640 640 x 400 CGA85 640 x 400 37.86 85.08 1024 x 640 640 x 400 VGA60
