Instrukcja obsługi Epson PowerLite 750c

Streszczenie treści zawartej na stronie nr. 1

E
R
PL750760_QS_CPD20249.qxd 6/24/05 3:25 PM Page 1
® ®
Epson PowerLite 750c/760c
Quick Setup
Connect the projector
to your notebook
Locate the required cables:
1
Power cord VGA computer cable
Connect the computer cable to
2
the blue Computer/Component Video
port on the projector.
Connect the other end to your notebook’s video-out
3
or monitor port.
NOTE: If your notebook has a DVI connector, you need to use an
optional DVI-to-VGA adapter with the included computer cable
(see your computer’s

Streszczenie treści zawartej na stronie nr. 2

PL750760_QS_CPD20249.qxd 6/24/05 3:25 PM Page 2 Quick Setup EpsonPowerLite 750/760c Using the remote control Troubleshooting If this is your first time using the remote, make sure its batteries 1 are installed as shown. If you see a blank screen... If you see a blank screen or the No signal message after turning on your notebook, check the following:  Make sure the Power light on the projector is green and not flashing, and the lens cover is off.  Press the Source Search button on the proje