Streszczenie treści zawartej na stronie nr. 1
MULTIMEDIA PROJECTOR
MODEL LC-VC1
OWNER’S MANUAL
Streszczenie treści zawartej na stronie nr. 2
TO THE OWNER Before operating this projector, read this manual thoroughly and operate the projector properly. This projector provides many convenient features and functions. Operating the projector properly enables you to manage those features and maintains it in better condition for a considerable time. Improper operation may result in not only shortening the product-life, but also malfunctions, fire hazard, or other accidents. If your projector seems to operate improperly, read this
Streszczenie treści zawartej na stronie nr. 3
SAFETY INSTRUCTIONS All the safety and operating instructions should be read cabinet slots as they may touch dangerous voltage points before the product is operated. or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the projector. Read all of the instructions given here and retain them for This projector should be operated only from the type of later use. Unplug this projector from AC power supply power source indicated on the marking l
Streszczenie treści zawartej na stronie nr. 4
COMPLIANCES Federal Communication Commission Notice This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmfu
Streszczenie treści zawartej na stronie nr. 5
TABLE OF CONTENTS SOUND ADJUSTMENT 22 FEATURES AND DESIGN 6 VOLUME ADJUSTMENT 22 MUTE SETTING 22 PREPARATION 7 COMPUTER MODE 23 NAME OF EACH PART OF PROJECTOR 7 SELECTING INPUT SOURCE 23 SETTING-UP PROJECTOR 8 SELECTING COMPUTER SYSTEM 23 CONNECTING AC POWER CORD 8 PC ADJUSTMENT 24 POSITIONING PROJECTOR 9 AUTO PC ADJUSTMENT 24 ADJUSTABLE FEET 10 MANUAL PC ADJUSTMENT 25 MOVING PROJECTOR 10 COMPATIBLE COMPUTER SPECIFICATIONS 27 PICTURE IMAGE ADJUSTMENT
Streszczenie treści zawartej na stronie nr. 6
FEATURES AND DESIGN This Multimedia Projector is designed with the most advanced technology for portability, durability, and ease of use. The projector utilizes built-in multimedia features, a palette of 16.77 million colors, and matrix liquid crystal display (LCD) technoloav. • Compatibility • Progressive Scan (for Video) This projector widely accepts various video and computer input signals including; Progressive Scan function converts interlace video • 6 Color Systems
Streszczenie treści zawartej na stronie nr. 7
Streszczenie treści zawartej na stronie nr. 8
PREPARATION CONNECTING AC POWER CORD This projector uses nominal input voltages of 100-120 V or 200- 240 V AC. The projector automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other type of power system. Consult your authorized dealer or service station if you are not sure of the type of power supply being in use. Connect projector with
Streszczenie treści zawartej na stronie nr. 9
POSITIONING THE PROJECTOR This projector is designed to project on a flat projection surface and it can be focused from 4.43’ (1 .35m) 45.9’ (14.Om). Refer to the figure below to adjust the screen size. RECOMMENDATION Brightness in the room has a great influence on picture quality. It is recommended to limit ambient lighting in order to provide the best image. LENS SHIFT ADJUSTMENT Projection Lens can be moved up and down with Motor- driven Lens Shift function. This function m
Streszczenie treści zawartej na stronie nr. 10
ADJUSTABLE FEET Picture tilt and projection angle can be adjusted by rotating Adjustable Feet. Projection angle can be adjusted to 9.0 degrees. 1 Lift the front of projector and pull Feet Lock Latches on both sides of projector. 2 Release Feet Lock Latches to lock Adjustable Feet and rotate Adjustable Feet to fine tune position and tilt. 3 To shorten Adjustable Feet, lift the front of projector and pull and undo Feet Lock Latches. Position and keystone distortion of th
Streszczenie treści zawartej na stronie nr. 11
This projector has INPUT TERMINALS and OUTPUT TERMINALS on its side for connecting computers and video equipment. Refer to the figure on pages 11 to 13 and connect properly.
Streszczenie treści zawartej na stronie nr. 12
Cables used for connection (* = Cables are not supplied with this projector.) • Video Cable (RCA x 1) • Video Cable (RCA x 3)*, (BNC x 1 )*, (BNC x 2)* or (BNC x 3)* • S-VIDEO Cable • Audio Cable (RCA x 2) Speaker Cable (Mini x 1 (stereo)) *
Streszczenie treści zawartej na stronie nr. 13
Cables used for connection (* = Cables are not supplied with this projector.) • VGA Cable (HDB 15 pin) * • Video Cable (BNC x 5) * • MAC Adapter (in the case of connecting Macintosh computer) * • Audio Cables (RCA x 2) or (RCA x 1 - Mini Plug (mono)) * Speaker Cable (Mini Plug (stereo)) *
Streszczenie treści zawartej na stronie nr. 14
This projector has CONTROL BUTTONS (TOP CONTROLS) and INDICATORS on its top.
Streszczenie treści zawartej na stronie nr. 15
TOP CONTROL
Streszczenie treści zawartej na stronie nr. 16
Remote Control Unit can be used as either Wired or Wireless. OPERATING RANGE Point Remote Control toward projector (Remote Receiver) whenever pressing the buttons. Maximum operating range for Remote Control is about 16.4’ (Sm) and 60° in front and rear of projector.
Streszczenie treści zawartej na stronie nr. 17
WIRED REMOTE CONTROL OPERATIONS When using this Remote Control Unit as Wired Remote Control, Connect Remote Control Unit to R/C JACK with Remote Control Cable (supplied). Batteries installation is required when using as Wired Remote Control Unit. REMOTE CONTROL BATTERIES INSTALLATION 1. Remove the battery compartment 2 Slide 2 batteries into the compartment. 3 Replace the compartment lid. lid To insure safe operation, please obser
Streszczenie treści zawartej na stronie nr. 18
HOW TO OPERATE ON-SCREEN MENU You can control and adjust this projector through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. Press MENU button to display ON- SCREEN MENU. Move the pointer (* see below) or adjust the value of item by pressing POINT button(s) on Top Control or on Remote Control Unit. * Pointer is the icon on ON-SCREEN MENU to select the item. See the figures on the section “FLOW OF ON- SCREEN MENU OPERATIO
Streszczenie treści zawartej na stronie nr. 19
MENU BAR Press MENU BUTTON for PC input source.
Streszczenie treści zawartej na stronie nr. 20
TURNING ON PROJECTOR 1 Complete the peripheral connections (with Computer, VCR, etc.) before turning on projector. (Refer to “CONNECTING TO PROJECTOR” on Pages 11~-13 for connecting that equipment.) 2 Connect the projector’s AC Power Cord into an AC outlet and turn MAIN ON I OFF SWITCH to ON. LAMP Indicator lights RED, and READY Indicator lights GREEN. NOTE : When “On start” function is ON, this projector is turned on automatically by switching MAIN ON / OFF SWITCH on. (Refe
