Instrukcja obsługi Sony VPD-LE100

Streszczenie treści zawartej na stronie nr. 1

BID SPECIFICATION
FOR
DLP PROJECTORS




MODEL NUMBER
VPD-LE100




INSTRUCTIONS:
REMOVE THIS COVER PAGE AND ADD TO REQUESTS FOR QUOTATION AND
PROPOSALS. THE OBJECTIVE OF THIS BID SPECIFICATION IS TO ASSIST YOU IN
CLEARLY SPECIFYING THE SONY PRODUCT IDENTIFIED ABOVE, AND ENSURING
THAT THE BUYER IS WELL INFORMED OF THE HIGH STANDARD OF
PERFORMANCE THAT IS TO BE EXPECTED OF A SONY PRODUCT. THE
INFORMATION IN THIS DOCUMENT IS CURRENT AS OF JUNE 2002. PRODUCT
SPECIFICATIO

Streszczenie treści zawartej na stronie nr. 2

1.0 General Information The purpose of this information is to provide the specification for a product whose primary purpose is the reproduction of video and / or computer graphics information for one or more viewers. This reproduction of this information is to be accomplished via a projection DLP display. This document provides the minimum specifications for this device. The performance comparison of displays is not only technical in nature, but is also subjective to the user, when

Streszczenie treści zawartej na stronie nr. 3

720P (60Hz) 1035I (60 Hz) 1080I (50 and 60 Hz) 1080P (24 PsF) VGA Computer Graphics (Modes 1, 2 and 3, 60 - 85 Hz) VESA 800x600 Computer Graphics (56 - 85 Hz) VESA 1024 x 768 Computer Graphics (43 – 85 Hz) VESA 1152 x 864 Computer Graphics (70 – 75 Hz) SUN 1152 x 900 Computer Graphics (65 – 76 Hz) VESA 1280 x 1024 Computer Graphics (43 – 85 Hz) VESA 1600 x 1200 Computer Graphics (60 - 75 Hz) Mac 13” Computer Graphics Mac 16” Computer Graphics Mac 21” Computer Graphics This device

Streszczenie treści zawartej na stronie nr. 4

the device. The device shall be addressable for control over multiple devices from a single remote control. The wired / wireless backlit projector remote control shall operate in the same fashion as the projector control panel, and shall accommodate infrared wireless operation, or operation via a standard mini-plug cable. An infrared extender shall be available from the device manufacturer for operation of the device wirelessly in a rear-screen or cabinet environment. The serial contr

Streszczenie treści zawartej na stronie nr. 5

5.0 Performance Specifications This device shall employ the use of 3 Texas Instruments high-resolution 1.1-inch DMD chips. This device shall provide a light output of 10,000 ANSI lumens, when measured using a 1280 x 1024 native resolution signal. This device shall include a standard power zoom / focus / shift lens, and other lenses shall be available as options for a variety of short-throw and long-throw applications. This device shall have a minimum RGB resolution of 1280 by 1024

Streszczenie treści zawartej na stronie nr. 6

Audio L/R on RCA (Phono) Connectors RGB Computer / Component Video (Sync on Green, Composite, or Separate Sync) on a 9 pin (D9) Connector Audio L/R on RCA (Phono) Connectors RGB Computer / Component Video (Sync on Green, Composite, or Separate Sync) on a VGA (HD15) Connector with loop-through Audio L/R on RCA (Phono) Connectors Component Serial Digital Video on a BNC Connector with loop-through Composite Video on a BNC Connector or Y/C Video on a 4 Pin DIN Connector, both with l

Streszczenie treści zawartej na stronie nr. 7

9.0 Safety Compliance Information This device shall be fully compliant with the following standards: UL 1950 cUL 950 FCC Class A IC Class A VCCI Class A JEIDA EN60 950 CE C-Tick 10.0 Warranty Information This device shall carry a 2-year manufacturer’s warranty, with a 90-day lamp warranty. Authorized servicing dealers of the devices’ manufacturer shall perform warranty service.