Streszczenie treści zawartej na stronie nr. 1
3-872-930-01 (1)
SR Projector
JP
____________________________________________
GB
Operating Instructions ___________________________________
•
• The supplied CD-ROM includes the Operating Instructions for the SRX-
R110/SRX-R105 (English, Japanese, French, German, Italian, Spanish and
Chinese versions).
For more details, see “Using the CD-ROM Manual” on page 6 (GB).
SRX-R110
SRX-R105
© 2005 Sony Corporation
Streszczenie treści zawartej na stronie nr. 2
For the customers in the USA WARNING This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide To prevent fire or shock hazard, do not reasonable protection against harmful interference when expose the unit to rain or moisture. the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio To avoid electrical shock, do not open the
Streszczenie treści zawartej na stronie nr. 3
Table of Contents Chapter 1 Overview Precautions ......................................................................................5 Using the CD-ROM Manual .............................................................6 CD-ROM System Requirements ........................................................... 6 Preparations ........................................................................................... 6 Reading the CD-ROM Manual.....................................................
Streszczenie treści zawartej na stronie nr. 4
Chapter 3 Projecting Projecting the Picture ...................................................................21 Using the Remote Commander ........................................................... 21 Using the Computer for Controlling the Projector.............................. 23 Chapter 4 Adjustments and Settings Using the SRX Controller Displaying the Control Function Menu Window .........................25 PICTURE CONTROL Window .......................................................
Streszczenie treści zawartej na stronie nr. 5
Chapter 1 Overview Overview 1 Chapter projector. Be aware that room heat rises to the ceiling; check that the temperature near the installation location Precautions is not excessive. • Install the projector on the floor or hang it from the ceiling. Any other installation causes a malfunction such On safety as color irregularity or a shorten lamp life. • Operate the unit on 200 – 240 V AC, 50/60 Hz (SRX- • Do not install the unit in a location near heat sources R110), or 100 – 240 V AC,
Streszczenie treści zawartej na stronie nr. 6
Chapter 1 Overview On cleaning • To keep the cabinet looking new, periodically clean it Using the CD-ROM with a soft cloth. Stubborn stains may be removed with Manual a cloth lightly dampened with a mild detergent solution. Never use strong solvents, such as thinner, benzene, or abrasive cleansers, since these will damage the cabinet. The supplied CR-ROM includes versions of the Operating • Avoid touching the lens. To remove dust on the lens, use Instructions for the SRX-R110/R105 in E
Streszczenie treści zawartej na stronie nr. 7
Chapter 1 Overview Notes Features • If you lose the CD-ROM disc or become unable to read its content, for example because of a hardware failure, you can do one of the following. High Brightness, High Picture Quality - You can purchase a new CD-ROM disc to replace one that has been lost or damaged. Contact your Sony High brightness service representative. The SRX-R110 uses two 2kW Xenon lamps as a light - You can purchase printed versions of the Operating source, and the SRX-R105 uses tw
Streszczenie treści zawartej na stronie nr. 8
Chapter 1 Overview Versatile Setup Location and Function of Various signal input The projector is equipped with an RS232C connector and Controls ETHERNET connector for communication. For signal inputs, the projector has four slots to which the optional analog input boards and HD-SDI input boards can be attached according to your requirement. Front/Top Optional lens Four optional zoom lenses are available depending on the projection distance you are setting up. The lens shift 12 3 funct
Streszczenie treści zawartej na stronie nr. 9
Chapter 1 Overview Menu window or by pressing the 1 button on the Remote Left Side/Rear Commander. h INTER LOCK jack (minijack) Connects to the external emergency switch. 1 2 When you use the interlock function, insert the mini-plug into this jack to open the + and – terminals. The projector’s lamps will be turned off immediately. When not in use, do not insert the mini-plug. i ETHERNET connector (10BASE-T/100BASE-TX) Connect to the ethernet connector on a computer in which the supplied
Streszczenie treści zawartej na stronie nr. 10
Chapter 1 Overview a Menu bar message is displayed in the STATUS MESSAGE window on the left side of the projector. d POWER ON/STANDBY (?/1) buttons and POWER indicator File menu Click ON to turn on the lamp. The indicator lights green. Selecting “Quit” from the File menu exits the SRX Clicking STANDBY opens the confirmation dialog. Controller. Clicking “OK” makes the projector enter standby mode. The indicator flashes green. Even in standby mode, the Back menu fans continue to run to r
Streszczenie treści zawartej na stronie nr. 11
Chapter 1 Overview c Input signal select drop-down list box Remote Commander Selects the input signal you want to project on the screen. The SCREEN CONTROL window changes depending on the screen mode selected with the screen mode button (1). 1 When dual- or quad-screen mode is selected, you can SCREEN 1 I MODE select the input independently on each divided screen. MUTING 2 INPUT A: Selects the signal input from the connectors on 1 2 4 3 FUNCTION the optional input board installed in the
Streszczenie treści zawartej na stronie nr. 12
Chapter 1 Overview B: Selects the signal input from the connectors on the SHIFT +/–: Adjust the vertical picture position. Pressing optional input board installed in the INPUT B section. the + button moves the picture upward. Pressing the – C: Selects the signal input from the connectors on the button moves the picture downward. optional input board installed in the INPUT C section. To install batteries D: Selects the signal input from the connectors on the optional input board installed i
Streszczenie treści zawartej na stronie nr. 13
Chapter 2 Preparations Preparations 2 Chapter activating the protection circuit. Be sure not to block the ventilation holes for exhaust. Leave a space of more than Precautions on 3 1m (39 /8 inches) around the unit. Installation Extremely hot and humid Unsuitable Installation Do not install the projector in the following situations. Such installations may cause a malfunction or damage to the projector. Poorly ventilated Location subject to sudden change of temperature The projector is e
Streszczenie treści zawartej na stronie nr. 14
Chapter 2 Preparations Unsuitable Conditions Installation Do not use the projector under the following conditions. Laying the unit on its side or upside down Using the Carrying Handles Use the front and rear carrying handles to carry the projector. Tilting the unit to the right or left Caution To avoid injury, have at least four people carry the projector using the front and rear handles. ±10° Avoid tilting the projector more than ± 10 degrees, and avoid installing it in place other than a
Streszczenie treści zawartej na stronie nr. 15
Chapter 2 Preparations Caution Installing the SRX Do not turn the spanner forcibly when the screw has fully rotated. Otherwise, the spanner may slip and injure your Controller in a Computer hand. for Controlling the Projector Installing the Projector This section describes briefly how to install the projector If you install the supplied SRX Controller in a computer, on the floor. The distance between the center of the lens you can control the projector from the computer. and the scree
Streszczenie treści zawartej na stronie nr. 16
Chapter 2 Preparations After a while, the Welcome page of the SRX When you want to install it in the currently displayed Controller appears. folder, click “Next.” If you want to install it in a different folder, click “Change…,” specify the folder, click “OK,” then click “Next.” The installation start window appears. 2 Click “Next.” The License Agreement window appears. 4 Click “Install.” The program installation starts. After a while, the following window appears. 3 Read the license agr
Streszczenie treści zawartej na stronie nr. 17
Chapter 2 Preparations ATTENTION Connecting a Computer Par mesure de sécurité, ne branchez pas le connecteur d’un périphérique ayant une tension excessive à ce port. Suivez for Controlling the les instructions pour ce port. Projector VORSICHT Schließen Sie das Kabel aus Sicherheitsgründen nicht an Connect a computer for controlling the projector to the eine Buchse für Peripheriegeräteanschluss an, die eine zu projector via the ETHERNET connector or the RS232C hohe Spannung aufweisen k
Streszczenie treści zawartej na stronie nr. 18
Chapter 2 Preparations d EMERGENCY STANDBY 1 button Clicking the button makes the projectors indicated by Starting the SRX “Connectable” under “Connection” in the projector detect window enter standby mode. The fans continue to run. Controller e Projector detect window Information on all of the projectors connected to a network Starting the SRX Controller is displayed. The following information is shown: Double-click the icon for the SRX Controller in the Alert: Shows whether there is a
Streszczenie treści zawartej na stronie nr. 19
Chapter 2 Preparations Connecting with Component/Video Connecting the Projector GBR Equipment Attach the optional LKRI-001 analog input board to the When you connect the projector, make sure to: input board attachment part on the projector, and connect • Turn off all equipment before making any connections. with a DVD recorder/player or analog video equipment • Use the proper cables for each connection. equipped with the component output, or an high-definition • Insert the cable plugs fi
Streszczenie treści zawartej na stronie nr. 20
Chapter 2 Preparations Connecting with a Computer Attach the optional LKRI-001 analog input board to the input board attachment part on the projector, and connect with a computer. Left side R(Pr/Cr)B G(Y/Y)(Pb/Cb)HD VD R(Pr/Cr)B G(Y/Y)(Pb/Cb)HD VD IN OUT INTER LOCK ETHERNET RS232C IN OUT R/G/B/HD/VD connectors Monitor cable (not supplied) to monitor output Computer Note Select “RGB” in “Signal Mode” of “Input Source” in the PICTURE CONTROL window. For details, see page 26. GB 20 Connecti
