Streszczenie treści zawartej na stronie nr. 1
Table of contents
2007-02-14
Quick Start Guide
GL408e / GL412e Barcode Thermal Printer
Streszczenie treści zawartej na stronie nr. 2
GL408e / GL412e Barcode Thermal Printer Table of contents Read this Quick Start manual before beginning. For the best printing results, we recommend the use of SATO genuine labels and ribbons. Contact your SATO representative for further details. Extensive contact information of worldwide SATO operations can be found on the Internet at www.satoworldwide.com
Streszczenie treści zawartej na stronie nr. 3
GL408e / GL412e Barcode Thermal Printer Table of contents 1 General ................................................................................................. 1 1.1 Important information .................................................................1 1.2 Limitation of liability ....................................................................1 1.3 Copyright.....................................................................................2 1.4 Explanation of symbols
Streszczenie treści zawartej na stronie nr. 4
GL408e / GL412e Barcode Thermal Printer General 1 General 1.1 Important information This quick guide provides important information on how to setup your new SATO product. Be sure to read this quick guide thoroughly before using this printer. It is an integral part of the product and should be kept in the immediate vicinity of the device and available to the operating staff. 1.2 Limitation of liability All information in this manual have been compiled under due
Streszczenie treści zawartej na stronie nr. 5
GL408e / GL412e Barcode Thermal Printer General 1.3 Copyright All text, images, logos and information contained within this manual are the intellectual property of SATO Corporation and are protected under worldwide patent and registration law. SATO Corporation or any of its Group Member Companies retain the right to modify, update, correct or delete this information or sections, at any time with or without notice and shall not be liable for any damages of any kind arising from th
Streszczenie treści zawartej na stronie nr. 6
GL408e / GL412e Barcode Thermal Printer General 1.4 Explanation of symbols This instruction manual uses various warning icons to help you understand the safe operation of your printer. Explanations of the icons are below. WARNING! Indicates neglectful or erroneous use may cause irreparable damage to the product, serious injury to the operator, or worse. CAUTION! Indicates a specific point where caution should be used. The graphic within the triang
Streszczenie treści zawartej na stronie nr. 7
GL408e / GL412e Barcode Thermal Printer Safety 2 Safety This paragraph provides you with an overview of the important safety aspects associated with the operation of your printer. Disregarding the operating instructions and safety regulations specified in this manual may result in considerable damage to your printer and endanger the operator. 2.1 Intended use The printer should only be used for printing on materials recommended by the manufacturer. WARNING
Streszczenie treści zawartej na stronie nr. 8
GL408e / GL412e Barcode Thermal Printer Safety 2.2 Operating Tips Your new SATO Printer is the latest in printing technology and must be cared for as any other electronic product. It is a very durable and dependable piece of equipment, but we suggest you follow a few common rules when installing or using your printer. " Do not operate in unstable locations such as an unsteady, slanted or extreme vibrating table. It may cause the equipment to shift from its desired location. "
Streszczenie treści zawartej na stronie nr. 9
GL408e / GL412e Barcode Thermal Printer Safety Electrical DANGER! To avoid possible electrical shock, do not operate the power switch or handle the power cable with a wet hand. Keep the power cable away from open flame or excessive heat. When disconnecting the power cable from its receptacle be sure to pull at the plugs receptacle end to avoid damaging the cable or exposing the operator to possible electrical shock. Cutter CAUTION! Risk of injury.
Streszczenie treści zawartej na stronie nr. 10
GL408e / GL412e Barcode Thermal Printer Transport and storage 3 Transport and storage 3.1 Transport information " Unplug the power cable from the printer before transporting it along with the printer. " Ensure you have removed all ribbons and media from the inside of your printer. If you must transport these with your printer, do so separately to avoid damaging the printer. 3.2 Storage " When storing the printer for an extended period of time, pro
Streszczenie treści zawartej na stronie nr. 11
GL408e / GL412e Barcode Thermal Printer Unpacking the printer 4 Unpacking the printer Unpack the printer and check the contents against this display. 1 Cushion 2 Printer 3 Box 8
Streszczenie treści zawartej na stronie nr. 12
GL408e / GL412e Barcode Thermal Printer Installation 5 Installation Place the printer in a level place If installed in a rough or slanting place, quality printing will not be available. It may cause malfunction and shorten the life of the printer. Use a stable platform Use a stable platform. Do not carry the printer with the media inside. Do not rock the printer. Avoid high heat and humidity Do not install in a place of high temperature or humidity. High temper
Streszczenie treści zawartej na stronie nr. 13
GL408e / GL412e Barcode Thermal Printer Overview 6 Overview 6.1 Parts and functions 1 Power switch (ON / OFF) 2 Operation panel (display, buttons, LED) 3 Front cover 4 Media cover Fig. 1 Printer main body, front 1 Print head (consumable item) 2 Platen roller (consumable item) Fig. 2 Print head 10
Streszczenie treści zawartej na stronie nr. 14
GL408e / GL412e Barcode Thermal Printer Overview 12 11 1 10 2 3 9 4 8 5 6 7 Fig. 3 Printer main body, side 1 Memory cartridge slot 7 Stopper screw 2 Roll guide 8 Front cover 3 Roll paper feeder 9 Print head open/close latch 4 Media guide knob 10 Ribbon feed spindle 5 Label damper 11 Ribbon take-up spindle 6 Bottom opening for fan-fold media 12 Media cover 2 3 1 Opening for fan-fold media 1 2 EXT connector (optional) 4 3 LAN / W-LAN card slot (option
Streszczenie treści zawartej na stronie nr. 15
GL408e / GL412e Barcode Thermal Printer Overview 1 LED: POWER (lights up when the power is on) ONLINE (lights up when communication is available, flashes when communication fails) STATUS (lights up and flashes when an error occurs, flashes when the printer is sending/receiving data) LABEL (lights up and flashes when a paper error occurs) RIBBON (lights up and flashes when a ribbon error occurs) 2 Display Back lighted LCD display icons, operation and error messages. 3
Streszczenie treści zawartej na stronie nr. 16
GL408e / GL412e Barcode Thermal Printer Setup and initial operation 7 Setup and initial operation 7.1 Connecting the device 7.1.1 Connecting the interface cable 1. Connect the interface cable to the interface connector (4, 5, 6) 2 on the printer and to your PC. 3 1 2. Lead the interface cable through the cable hook (8) on the printer. 4 5 6 7 8 Fig. 6 Printer main body, back 7.1.2 Turning on the device 1. Connect the power cable to the power supply
Streszczenie treści zawartej na stronie nr. 17
GL408e / GL412e Barcode Thermal Printer Setup and initial operation 2. Now, pull the power cable from the power outlet. 3. Remove the power cable out of the hook and pull the power cable from the printer. 7.2 Inserting media 1. Open the media cover. 2. Install the media roll (1) on the roll paper feeder (3). Adjust the roll guide (2), so that the media roll can rotate. 3. Open the print head assembly (8) by using the print head latch (4). Fig. 7 Inserting media, pri
Streszczenie treści zawartej na stronie nr. 18
GL408e / GL412e Barcode Thermal Printer Setup and initial operation 7.3 Inserting ribbon 1. Open the media cover (1). 2. Install the ribbon take-up core (2) on the ribbon take-up spindle (3). NOTE! One ribbon take-up core is delivered with the printer. When operation empties your supply core, use this as your next take-up core. 3. Push the ribbon roll (4) on the ribbon supply spindle (5) against the stopper. Fig. 9 Inserting ribbon, front 4. Open the print hea
Streszczenie treści zawartej na stronie nr. 19
GL408e / GL412e Barcode Thermal Printer Operation 8 Operation 8.1 Printing 1. Turn the power on. The printer starts initializing automatically. It executes an automatic media calibration. The media calibration can also be operated manually by menu settings. S ST TA AR RT TIIN NG G S SY YS ST TE EM M T TA AS SK KS S After the media calibration the printer displays its current state (ONLINE / OFFLINE), interface type and emulation language. ONLINE PARL/SBPL The
Streszczenie treści zawartej na stronie nr. 20
GL408e / GL412e Barcode Thermal Printer Operation Interface mode: Configuration of host interface Option mode: Setup and status reporting for ODV & RFID encoder (if installed) Emulation mode: Setting of desired active emulation and various printer operating parameters Advanced mode: Allows advanced printer operation adjustments Diagnostic mode: Setting of reserved parameters available to field service personnel only Configuration mode
