Streszczenie treści zawartej na stronie nr. 1
M5163dn
User's Guide
December 2012 www.lexmark.com
Machine type(s):
4063
Model(s):
490
Streszczenie treści zawartej na stronie nr. 2
Contents 2 Contents Safety information.......................................................................................5 Learning about the printer...........................................................................7 Finding information about the printer......................................................................................................7 Selecting a location for the printer.............................................................................................
Streszczenie treści zawartej na stronie nr. 3
Contents 3 Canceling a print job................................................................................................................................82 Understanding the printer menus..............................................................83 Menus list................................................................................................................................................83 Paper menu..........................................................................
Streszczenie treści zawartej na stronie nr. 4
Contents 4 Restoring factory default settings.........................................................................................................158 Clearing jams............................................................................................159 Avoiding jams........................................................................................................................................159 Understanding jam messages and locations............................................
Streszczenie treści zawartej na stronie nr. 5
Safety information 5 Safety information Connect the power cord to a properly grounded electrical outlet that is near the product and easily accessible. Do not place or use this product near water or wet locations. CAUTION—POTENTIAL INJURY: This product uses a laser. Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure. This product uses a printing process that heats the print media, and the heat may cause the med
Streszczenie treści zawartej na stronie nr. 6
Safety information 6 CAUTION—SHOCK HAZARD: Make sure that all external connections (such as Ethernet and telephone system connections) are properly installed in their marked plug-in ports. This product is designed, tested, and approved to meet strict global safety standards with the use of specific manufacturer's components. The safety features of some parts may not always be obvious. The manufacturer is not responsible for the use of other replacement parts. CAUTION—POTENTIAL INJURY: Do not cu
Streszczenie treści zawartej na stronie nr. 7
Learning about the printer 7 Learning about the printer Finding information about the printer What are you looking for? Find it here Initial setup instructions: Setup documentation—The setup documentation came with the printer and is also available at � Connecting the printer http://support.lexmark.com. � Installing the printer software Additional setup and instructions for using the printer: User's Guide and Quick Reference Guide—The guides are available on the Documentation CD. � Selecting and
Streszczenie treści zawartej na stronie nr. 8
Learning about the printer 8 What are you looking for? Find it here The latest supplemental information, updates, and customer Lexmark Support Web site— support: http://support.lexmark.com � Documentation Note: Select your country or region, and then select your product to view the appropriate support site. � Driver downloads Support telephone numbers and hours of operation for � Live chat support your country or region can be found on the Support Web � E ‑mail support site or on the printed war
Streszczenie treści zawartej na stronie nr. 9
Learning about the printer 9 5 4 1 3 2 1 Right side 152 mm (6 in.) 2 Front 508 mm (20 in.) 3 Left side 152 mm (6 in.) 4 Rear 152 mm (6 in.) 5 Top 115 mm (4.5 in.) Printer configurations Basic model 1 2 3 4 1 Standard bin 2 Printer control panel 3 Multipurpose feeder 4 Standard 550 ‑sheet tray (Tray 1)
Streszczenie treści zawartej na stronie nr. 10
Learning about the printer 10 Fully configured model CAUTION—TIPPING HAZARD: Floor-mounted configurations require additional furniture for stability. You must use either a printer stand or printer base if you are using multiple input options. If you purchased a printer with a similar configuration, then you may need additional furniture. For more information, see www.lexmark.com/multifunctionprinters. The following illustration shows the maximum number of optional finishers and trays that are su
Streszczenie treści zawartej na stronie nr. 11
Learning about the printer 11 In a configuration with two or more optional finishers: � The staple finisher must always be on top. � The high ‑capacity output expander must always be at the bottom. � The output expander is the only finisher that can be placed on top of the high ‑capacity output expander. � The output expander and mailbox may be installed in any order. When using optional trays: � Always use a caster base when the printer is configured with a 2100 ‑sheet tray. � The 2100 ‑sheet t
Streszczenie treści zawartej na stronie nr. 12
Learning about the printer 12 Use the To 8 Home button Go to the home screen. 9 Indicator light Check the status of the printer. 10 USB port Connect a flash drive to the printer. Note: Only the front USB port supports flash drives. Understanding the colors of the Sleep button and indicator lights The colors of the Sleep button and indicator lights on the printer control panel signify a certain printer status or condition. Indicator light color and its corresponding printer status Indicator light
Streszczenie treści zawartej na stronie nr. 13
Additional printer setup 13 Additional printer setup Installing internal options CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer. Available internal options � Memory ca
Streszczenie treści zawartej na stronie nr. 14
Additional printer setup 14 2 Using a screwdriver, loosen the screws on the controller board shield. 3 Remove the shield. 1 2
Streszczenie treści zawartej na stronie nr. 15
Additional printer setup 15 4 Use the following illustration to locate the appropriate connector: Warning—Potential Damage: Controller board electronic components are easily damaged by static electricity. Touch a metal surface on the printer first before touching any controller board electronic component or connector. 1 2 3 1 Lexmark Internal Solutions Port or printer hard disk connector 2 Option card connector 3 Memory card connector 5 Align the screws with the holes on the shield, and then rea
Streszczenie treści zawartej na stronie nr. 16
Additional printer setup 16 6 Tighten the screws on the shield. 7 Reattach the access cover. 1 2 Installing a memory card CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printe
Streszczenie treści zawartej na stronie nr. 17
Additional printer setup 17 An optional memory card can be purchased separately and attached to the controller board. 1 Access the controller board. For more information, see “Accessing the controller board” on page 13. 2 Unpack the memory card. Warning—Potential Damage: Do not touch the connection points along the edge of the card. Doing so may cause damage. 3 Align the notch (1) on the memory card with the ridge (2) on the connector. 1 2 4 Push the memory card straight into the connector, and
Streszczenie treści zawartej na stronie nr. 18
Additional printer setup 18 Installing an Internal Solutions Port The controller board supports one optional Lexmark Internal Solutions Port (ISP). Note: This task requires a flat ‑head screwdriver. CAUTION—SHOCK HAZARD: If you are accessing the controller board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the electrical outlet before continuing. If you have any other devices attached to the pri
Streszczenie treści zawartej na stronie nr. 19
Additional printer setup 19 4 Remove the metal cover from the ISP opening. a Loosen the screw. b Lift the metal cover, and then pull it out completely. 1 2 3 5 Align the posts of the plastic bracket with the holes on the controller board cage, and then press the plastic bracket on the controller board cage until it clicks into place. Note: Make sure that the plastic bracket has latched completely, and that the plastic bracket is seated firmly on the controller board cage.
Streszczenie treści zawartej na stronie nr. 20
Additional printer setup 20 6 Install the ISP on the plastic bracket. Note: Hold the ISP at an angle over the plastic bracket so that any overhanging connectors will pass through the ISP opening in the controller board cage. 7 Lower the ISP toward the plastic bracket until the ISP is seated between the guides of the plastic bracket.
