Instrukcja obsługi Fujitsu FTP-604 FTP-624DSL

Streszczenie treści zawartej na stronie nr. 1

BATTERY DRIVE, MICRO LINE THERMAL PRINTER
2” TYPE MECHANISM AND INTERFACE BOARD
FTP-624MCL001/002/FTP-624DCL/DSL
n OVERVIEW
FTP-624MCL/FTP-624DCL Series is a high speed line thermal
printer driven by battery, printing on 2-inch wide paper (58 mm/
60 mm).
This printer is compact and lightweight, and the design allows
easy head maintenance, head cleaning and head
replacement.
This printer is suitable for a variety of applications, such as
hand held terminals, POS terminals, ticket machines, coupo

Streszczenie treści zawartej na stronie nr. 2

FTP-624MCL001/002/FTP-624DCL/DSL002 n DESIGNATION Item Part number 1 Printer mechanism FTP-624MCL001/002* 2 Centronics FTP-624DCL002* Interface Board 3 RS-232C FTP-624DSL002* LSI Micro Controller Unit FTP-624CU102 Thermal head cable FTP-624Y001 Parallel interface cable FTP-441Y201 Cables Serial interface cable FTP-624Y301 Power cables FTP-621Y401 FTP621Y601 *1: 001 is for front paper insertion (curl path) and 002 is for rear paper insertion (straight path). *2: 002 supports ANK, 102 supports ANK

Streszczenie treści zawartej na stronie nr. 3

FTP-624MCL001/002/FTP-624DCL/DSL (Continued) Item Specifications Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries) For head Peak current: approx. 2.6 A (conditions: room temp., 7.2 VDC, 64 dots on) Power Voltage: 4.2 to 8.5 VDC (equivalent to 2 Lithium lon batteries) supply For motor Peak current: approx. 0.8 A (conditions: room temperature, 7.2 VDC) Voltage: 5 VDC ± 5% For logic Current: 0.2 A maximum Mechanism 82 (W) × 46 (D) × 20 (H) mm (excluding lever and knob diameter) Dimen

Streszczenie treści zawartej na stronie nr. 4

2-MOUNTING HOLE(M2) FTP-624MCL001/002/FTP-624DCL/DSL002 n DIMENSIONS Printer mechanism PAPER INSERTION (MCLOO1) 20.1 HEAD UP LEVER (AT HEAD DOWN) CENTER OF PAPER PAPER INSERTION (MCLOO2) HEAD CONNECTOR – 1 41.7 47.8 (89.5) Unit: mm 4 45.5 1.5 (150) (7.5)

Streszczenie treści zawartej na stronie nr. 5

FTP-624MCL001/002/FTP-624DCL/DSL Interface board 130.8 120.7 105.4 71.1 33.0 5.1 5.1 15.2 CN5 CN12** CN9* CN10 CN11** CN2 CN1 CN4 5.1 59.7 5.1 73.7 4-ø3.6 86.4 105.4 114.2 120.7 Mounting Height Mounting Height * CN9 on FTP-624DSL only Unit: mm **CN6, CN7, CN11, CN12 not used 5 17.0 5.0 26.7 39.4 CN6** 52.1 1.6 CN7** 88.9 78.7 39.4 5.1 5.1 CN3 CN8 5.1 5.1

Streszczenie treści zawartej na stronie nr. 6

FTP-624MCL001/002/FTP-624DCL/DSL002 n CONNECTOR PIN ASSIGNMENT FOR PRINTER MECHANISM 1. Thermal Head Head side : B16B-PH-K-S-2.2 (J.S.T.) or equivalent Board side : PHR-16 (J.S.T.) or equivalent *1: Symbol: " " means a negative logic signal Thermal head heat sink Head up level Motor 1, 2, 3, ......................................15, 16 Connector Pin No. 2. Motor connectors 3. Sensor connectors Motor side : PHR-4 (J.S.T.) or equivalent Sensor : PHR-5 (J.S.T.) or equivalent Board s

Streszczenie treści zawartej na stronie nr. 7

FTP-624MCL001/002/FTP-624DCL/DSL n FUNCTION Im tem Ite 1n.T. estprintfunctio 8nMotorpowersavingfunctio 2n.P. aperoutdetectio 9nMarkdetectionfunctio 3n .P. apernearenddetectio 1n0MCUoperationabnormalitydetectio 4n.H. eadupdetectio 1n1PowerON/OFFsequenceprotectio 5n .T. hermalheadtemperatureabnormalitydetectio1n2Motorover-currentprotectio 6n.B. low-outfusedetectio 1r3Hardwaretime 7n .Headvoltageabnormalitydetectio n INTERFACE, COMMAND, OPTIONS Please refer to the FTP-624DCL/DSL DATA SHEET. Europe

Streszczenie treści zawartej na stronie nr. 8

FTP-624MCL001/002/FTP-624DCL/DSL002 n PRINT SAMPLE 8