Streszczenie treści zawartej na stronie nr. 1
LINE THERMAL PRINTER
MODEL CT-S2000/CT-S2000DC
User’s Manual
Streszczenie treści zawartej na stronie nr. 2
WEEE MARK En Ge Fr Sp It Du Da Por Pol
Streszczenie treści zawartej na stronie nr. 3
Declaration of Conformity This printer conforms to the following Standards: Low Voltage Directive 73/23/EEC, 93/68/EEC and the EMC Directive 89/336/EEC, 92/31/EEC, 93/68/EEC. LVD: EN60950-1 EMC : EN55022 Class A EN61000-3-2 EN61000-3-3 EN55024 This declaration is applied only for 230V model. IMPORTANT: This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instruction manual, may cause interference to radio communications. It
Streszczenie treści zawartej na stronie nr. 4
GENERAL PRECAUTIONS ● Before using this product, be sure to read through this manual. After having read this manual, keep it in a safe, readily accessible place for future reference. ● The information contained herein is subject to change without prior notice. ● Reproduction or transfer of part or all of this document in any means is prohibited without permission from Citizen Systems. ● Note that Citizen Systems is not responsible for any operation results regardless of missing, error, or mispr
Streszczenie treści zawartej na stronie nr. 5
SAFETY PRECAUTIONS ... WHICH SHOULD BE STRICTLY OBSERVED Before using this product for the first time, carefully read these SAFETY PRECAUTIONS. Improper handling may result in accidents (fire, electric shock or injury). In order to prevent injury to operators, third parties, or damage to property, special warning symbols are used in the User’s Manual to indicate important items to be strictly observed. ● After having read this Manual, keep it in a safe, readily accessible place for future refere
Streszczenie treści zawartej na stronie nr. 6
PRECAUTIONS ON PRINTER INSTALLATION WARNING ■ Do not use or store this product in a place where it will be exposed to: * Flames or moist air. * Direct sunlight. * Hot airflow or radiation from a heating device. * Salty air or corrosive gases. * Ill-ventilated atmosphere. * Chemical reactions in a laboratory. * Airborne oil, steel particles, or dust. * Static electricity or strong magnetic field. • Neglecting these warnings may result in printer failure, overheating, emission of smoke, fire, or e
Streszczenie treści zawartej na stronie nr. 7
CAUTION Do not use the printer under the following conditions. ■ A state subject to vibration or unstable state. ■ A state with this product slanted. • Otherwise dropping may cause injury. • Poor print quality may occur. ■ A state where the printer ventilation holes are obstructed by a nearby wall or other equipment. ■ A state where any object is placed on the printer ■ A state where the printer is covered or wrapped by a cloth or bed clothing • Be careful about internal heat buildup, which co
Streszczenie treści zawartej na stronie nr. 8
PRECAUTIONS IN HANDLING THE PRINTER WARNING Please observe the following precautions for power source and power cord: ■ Do not plug or unplug the power cord with a wet hand. ■ Use the printer only at the specified supply voltage and frequency. ■ Use only the specified AC adapter with the printer. ■ Check to make sure that the supply outlet from which the printer is powered has a sufficient capacity. ■ Do not supply the printer from a power strip or current tap shared with other appliances. ■ Do
Streszczenie treści zawartej na stronie nr. 9
CAUTION Caution label is attached on the position shown in the following figure. Carefully read the precautions in handling before using the printer. THIS LABEL INDICATES THE RISK OF ANY INJURY DUE TO “HIGH TEMPERA TURE” OF THE PRINT HEAD. ■ Do not transport this printer with the paper roll inside. •Printer failure or breakage may occur. To prevent possible malfunction or failure observe the following. ■ Avoid operating the printer without paper properly loaded. ■ Avoid the use of paper not com
Streszczenie treści zawartej na stronie nr. 10
CAUTION To prevent injury and printer failures from worsening, observe the following: ■ Do not touch the printing surface of the thermal head. ■ Do not touch any of the moving parts (e.g., paper cutter, gears, active electrical parts) while the printer is working. ■ In case of trouble do not attempt to repair the printer. Ask Citizen Systems service for repair. ■ Be careful that the printer cover does not entrap your hands or fingers. ■ Be careful with sharp edges on the printer. Do not allow
Streszczenie treści zawartej na stronie nr. 11
THE TABLE OF CONTENTS 1. GENERAL OUTLINE....................................................................9 1.1 Features ..........................................................................................9 1.2 Unpacking .....................................................................................10 1.3 Model Classification.....................................................................10 1.4 Basic Specifications .........................................................
Streszczenie treści zawartej na stronie nr. 12
1. GENERAL OUTLINE The CT-S2000/CT-S2000DC are thermal line printers designed for use with a broad array of terminal equipment including data, POS, and kitchen terminals. With extensive features, they can be used in a wide range of applications. 1.1 Features ●Compact, easy-to-use universal design. ●Drop-in Paper Roll mechanism facilitating easy paper handling and head cleaning. ● Drip-proof design ● High speed (220 mm/s) printing. ● Versatile Roll Capacity with ability to use 83 mm, 80 mm, 60
Streszczenie treści zawartej na stronie nr. 13
1.2 Unpacking When unpacking the printer, confirm that the following are provided: ● Printer: 1 ● AC adapter (Option, only for CT-S2000DC): 1 ● AC power cord (Option, only for CT-S2000DC): 1 ● Sample paper roll: 1 roll ● User’s manual (This manual): 1 User’s manual AC power cord Sample paper roll (This manual) CT-S2000 (AC power type) AC adapter AC power cord User’s manual Sample paper roll (Option) (Option) (This manual) CT-S2000DC (DC power supply type) 1.3 Model Classification The printer m
Streszczenie treści zawartej na stronie nr. 14
1.4 Basic Specifications Item Specifications Model CT-S2000 PA, CT-S2000 RS, CT-S2000DC PA, CT-S2000DC RS Print method Line thermal dot print method Print width *1 80 mm/640 dots, 72 mm/576 dots, 54.5 mm/436 dots, 54 mm/432 dots Dot density 8 × 8 dots/mm (203 dpi) Print speed 220 mm/s (Fastest, print density 100 %), 1760 dot lines/s Number of print columns Dot configuration Number of print (columns) (Dot) columns *2 Paper width 83mm 80mm 60mm 58mm Font Font A 53 48 36 35 12 × 24 Font B 71 64
Streszczenie treści zawartej na stronie nr. 15
Notes: *1: When paper width is 83, 80, 60, 58 mm *2: The number of printable columns is selectable with a Memory Switch. The number of columns in this table refers to typical model. Printer varies partly in the number of columns depending on printer specifications. *3: This rating is obtained by the use of specified AC adapter (35AD1 or 35AD2). *4: As each character size includes the space inside the character font, actual character looks smaller. 2. EXPLANATION OF PRINTER PARTS 2.1 Printer Ap
Streszczenie treści zawartej na stronie nr. 16
Operation Panel POWER LED ERROR LED FEED button ● POWER LED Illuminated when the printer power is on and off when the printer power is off. May blink or light in a special mode or in case of failure. ● ERROR LED Illuminated or blinks when paper is empty or in case of failure. The interval length of blinking represents the type of error. ● FEED button Pressing this button once causes the paper to feed one line. The longer the button is pressed, the more paper is fed. In case of auto cutter error
Streszczenie treści zawartej na stronie nr. 17
2.2 Printer Cover Inside ● Paper feed roller Print (thermal) head Feeds paper as part of print mechanism. ● Paper-near-end sensor Detects near paper end, change Paper feed roller position in accordance with the outer diameter of paper core. Auto cutter ● Auto cutter Cuts the paper with a command at the end of printing. Cutting method is selectable between partial cut and full cut with a command. ● Print (thermal) head Prints characters and/or graphic data on thermal paper. Paper-near-end ● Pap
Streszczenie treści zawartej na stronie nr. 18
3. PREPARATION 3.1 Connecting the AC Power Cord 1. Turn off the printer power. 2. ● For AC power type (with built-in power supply), connect the AC power cord to the AC inlet at the back of the printer and plug the AC power cord into the wall outlet. ● For DC power type, connect the AC adapter cable connector to the power connector at the back of the printer with its flat surface facing interface connector side. Then connect the AC power cord to the AC inlet of the AC adapter and then plug the
Streszczenie treści zawartej na stronie nr. 19
3.2 Connecting Interface Cables Confirm that the power switch is OFF and connect the interface cable. Orient the interface cable terminal correctly and insert it into the interface connector. Parallel Interface USB Interface Serial Interface CAUTION! ■ When disconnecting the cable, always hold the connector. ■ Be careful not to insert the USB interface cable into the cash drawer kick-out connector. For serial interface cable, use the one with the following connection. 25-pin - 25-pin cable 9-pi
Streszczenie treści zawartej na stronie nr. 20
3.3 Connecting the Cash Drawer 1. Confirm that the power switch is OFF. Cash drawer 2. Confirm the top and bottom of the cash kick-out connector drawer cable connector and insert it into the cash drawer kick-out connector at the back of the printer. 3. Screw the cash drawer's ground wire to the body of the printer. Cash drawer cable connector CAUTION! DO NOT connect any other device than the specified cash drawer to the cash drawer kick-out connector. (DO NOT connect a telephone line either.) (
