Streszczenie treści zawartej na stronie nr. 1
Cordless Auto Feed
Screwdriver
MODEL 6835D
INSTR U CTION MANU AL
WARNING:
For your personal safety, READ and UNDERSTAND before using.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
www.makitatools.com
Streszczenie treści zawartej na stronie nr. 2
SPECIFICATIONS Model 6835D Drywall screw size No load speed (RPM) Overall length Net weight 4 mm x 25 - 41 mm 364 mm 2.0 kg 2,000/min. (5/32” x 1” - 1-5/8”) (14-5/16”) (4.4 lbs) Battery Battery Charging Voltage Input Output Cartridge Charger time 1222 45 min. A.C. only D.C. 1234 12V DC1413 60 min. 50 Hz - 60 Hz 7.2 V - 14.4 V 1235 70 min. • Manufacturer reserves the right to change specifications without notice. Specifications may differ from country to country. GENERAL SAFETY RULES USA003-1
Streszczenie treści zawartej na stronie nr. 3
12. Use clamps or other practical way to Electrical Safety secure and support the workpiece to a 4. A battery operated tool with integral bat- stable platform. Holding the work by hand or teries or a separate battery pack must be against your body is unstable and may lead recharged only with the specified charger to loss of control. for the battery. A charger that may be suit- 13. Do not force tool. Use the correct tool for able for one type of battery may create a risk your application. The cor
Streszczenie treści zawartej na stronie nr. 4
22. When servicing a tool, use only identical SERVICE replacement parts. Follow instructions in 21. Tool service must be performed only by the Maintenance section of this manual. qualified repair personnel. Service or main- Use of unauthorized parts or failure to follow tenance performed by unqualified personnel Maintenance instructions may create a risk of may result in a risk of injury. shock or injury. SPECIFIC SAFETY RULES USB026-2 DO NOT let comfort or familiarity with product (gained from
Streszczenie treści zawartej na stronie nr. 5
SYMBOLS USD301-1 The followings show the symbols used for tool. V ....................... volts ....................no load speed n ˚ ................... direct current .../min................revolutions or reciprocation per minute IMPORTANT SAFETY INSTRUCTIONS FOR CHARGER & BATTERY CARTRIDGE USC001-3 1. SAVE THESE INSTRUCTIONS - This man- 6. To reduce risk of damage to electric plug ual contains important safety and operat- and cord, pull by plug rather than cord ing instructions for battery
Streszczenie treści zawartej na stronie nr. 6
11. Do not disassemble charger or battery 14. Young children should be supervised to cartridge; take it to a qualified serviceman ensure that they do not play with the bat- when service or repair is required, Incor- tery charger. rect reassembly may result in a risk of 15. If operating time has become excessively electric shock or fire. shorter, stop operating immediately. It 12. To reduce risk of electric shock, unplug may result in a risk of overheating, possi- charger from outlet before attem
Streszczenie treści zawartej na stronie nr. 7
FUNCTIONAL CAUTION: DESCRIPTION • Always be sure that the tool is switched off and the battery cartridge is removed before adjusting or checking function on the tool. Installing or removing battery cartridge • Always switch off the tool before insertion or removal of the battery cartridge. 001873 • To remove the battery cartridge, withdraw it from the tool while pressing the push buttons on both sides of the cartridge. 1 • To insert the battery cartridge, align the tongue on the battery cartrid
Streszczenie treści zawartej na stronie nr. 8
NOTE: • The battery charger is for charging Makita battery cartridge. Never use it for other purposes or for other manufacturer’s batteries. • When you charge a new battery cartridge or a battery cartridge which has not been used for a long period of time, it may not accept a full charge. This is a normal condition and does not indicate a problem. You can recharge the battery cartridge fully after discharging it completely and recharging a couple of times. • If you charge a battery cartridge fro
Streszczenie treści zawartej na stronie nr. 9
Setting for desired screw length 001875 There are 3 positive-lock screw length settings. To obtain the desired setting, pull out the stopper base while depressing the lever until you see the number of the desired screw 2 1 length (indicated on the plate) appear to rest on the very top edge of the casing. 3 See the table below for the relation between the number indi- 4 cated on the plate and the respective screw length ranges. 1. Lever Number indicated on the plate Screw length range 2. Stopper
Streszczenie treści zawartej na stronie nr. 10
ASSEMBLY CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before carrying out any work on the tool. Installing or removing bit CAUTION: • Always be sure that the tool is switched off and the battery cartridge is removed before installing or removing the bit. 001878 Loosen the thumb screws which secure the casing. Pull out 1 the casing in the direction of the arrow. 2 1. Casing 2. Thumb screws 001879 Press the dust cover toward the plain bearing and pul
Streszczenie treści zawartej na stronie nr. 11
Installing screw strip 001880 Insert the screw strip through the screw guide. Then insert it 1 through the feeder box until the first screw reaches the posi- tion next to the driving position. 2 3 1. Feeder box 2. Screw strip 3. Screw guide 001881 1 1. Driving position Removing screw strip 001883 To remove the screw strip, just pull it out in the direction of the arrow. 001882 If you depress the reverse button, you can pull out the screw strip in the reverse direction of the arrow. 1 1. Reverse
Streszczenie treści zawartej na stronie nr. 12
Carry hook 001884 The carry hook is convenient for temporarily hooking the tool. It can be installed on either side of the tool. When installing or removing the carry hook, widen it by pressing its lower portion in the direction of the arrow. 1 1. Hook Installing set plate (optional accessory) 001885 Always install the set plate when using battery cartridges 1200, 1202 or 1202A. Install the set plate on the tool with the 1 screw provided. 2 1. Screw 2. Set plate Driving operation OPERATION 00188
Streszczenie treści zawartej na stronie nr. 13
• Do not operate the tool without screws. It will damage the driving surface. • If the feeder box does not work smoothly when driving screws, spray car wax (spray type) on the sliding surfaces. Never lubricate it. Driving in corner 001887 This tool can be used to drive at a position 15 mm (5/8”) away from the wall. 1 2 CAUTION: • Driving at a position closer than 15 mm (5/8”) to the wall or driving with the stopper base in contact with the wall may damage the screw heads and cause wear on the 15
Streszczenie treści zawartej na stronie nr. 14
ACCESSORIES CAUTION: • These accessories or attachments are recommended for use with your Makita tool specified in this manual. The use of any other accessories or attachments might present a risk of injury to persons. Only use accessory or attachment for its stated purpose. If you need any assistance for more details regarding these accessories, ask your local Makita service center. • Various type of Makita genuine batteries and chargers • Drywall screw strip • Set plate • Phillips bit • Plasti
Streszczenie treści zawartej na stronie nr. 15
Memo 15
Streszczenie treści zawartej na stronie nr. 16
Memo 16
Streszczenie treści zawartej na stronie nr. 17
First-Class Postage Required Post Office will not deliver without proper postage. Makita U.S.A., Inc. 14930 Northam Street La Mirada, CA 90638-5753 Fold 17 Cut
Streszczenie treści zawartej na stronie nr. 18
MAIL THIS PORTION Your answers to the following questions are appreciated. 1. This product was purchased from: 3. How did you learn about this product: Home Center Other ( ) Magazine Radio Hardware/Lumber Store From Dealer Exhibition Tool Distributor Newspaper From Friend Industrial Supply Store Display Previous Usage Construction Supply Catalog Other ( ) 2. Use of the product is intended for: 4. Most favored points are: Construction Trade Design Repair Se
Streszczenie treści zawartej na stronie nr. 19
FACTORY SERVICE CENTERS 1-800-4-MAKITA RETAIN THIS PORTION FOR YOUR RECORDS ALABAMA COLORADO KENTUCKY NEW MEXICO PUERTO RICO 2365 Pelham Parkway 11839 E. 51st Ave. 1215 S. Hurstbourne Parkway 5805 Menaul Blvd. NE 200 Guayama St. Pelham, AL 35124 Denver, CO 80239-2709 Louisville, KY 40222 Albuquerque, NM 87110 Hato Rey, PR 00917 (205) 620-1791 (303) 371-2850 (502) 326-3740 (505) 881-4619 (787) 250-8776 ARIZONA CONNECTICUT LOUSIANA NEW YORK TENNESSEE 3707 E. Broadway Rd., Ste. 6 508 Spring St.
Streszczenie treści zawartej na stronie nr. 20
WARNING Some dust created by power sanding, sawing, grinding, drilling, and other construction activities contains chemicals known to the State of California to cause cancer, birth defects or other reproductive harm. Some examples of these chemicals are: • lead from lead-based paints, • crystalline silica from bricks and cement and other masonry products, and • arsenic and chromium from chemically-treated lumber. Your risk from these exposures varies, depending on how often you do this type of
