Streszczenie treści zawartej na stronie nr. 1
User Guide
Switched Rack Power Distribution
Unit
AP89xx
Streszczenie treści zawartej na stronie nr. 2
Contents Introduction ..................................................................... 1 Product Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Access Priorities for Logging on. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Types of User Accounts. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Watchdog Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Overview . . . .
Streszczenie treści zawartej na stronie nr. 3
About the Main Screen . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Using the Command Line Interface. . . . . . . . . . . . . . . . . . . . . . . . . . 13 Command Syntax . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 Command Response Codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 Network Management Card Command Descriptions . . . . . . . . . . .16 about . . . . . . . . . . . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 4
Device Command Descriptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 bkLowLoad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 bkNearOver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 bkOverLoad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28 bkReading . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Streszczenie treści zawartej na stronie nr. 5
Web Interface................................................................. 46 Supported Web Browsers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Logging On to the Web Interface. . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46 URL address formats . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 47 Web Interface Features. . . . . . .
Streszczenie treści zawartej na stronie nr. 6
Outlet Settings for Outlets and Outlet Groups. . . . . . . . . . . . . . . . . 59 Initiate a control action . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59 Configure outlet settings and the outlet name . . . . . . . . . . . . . . . 61 Scheduling Outlet Actions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Actions you can schedule . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62 Schedule an outlet event . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 7
Administration: Network Features............................... 73 TCP/IP and Communication Settings . . . . . . . . . . . . . . . . . . . . . . . . 73 TCP/IP settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 DHCP response options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Port Speed. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75 Ping Response . . . . . . . . . . . . . . . . .
Streszczenie treści zawartej na stronie nr. 8
Event Log and Temperature Units. . . . . . . . . . . . . . . . . . . . . . . . . . .92 Color-code event log text . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 Change the default temperature scale . . . . . . . . . . . . . . . . . . . . . . .92 Reset the Rack PDU . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .92 Configure Links . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .93 About the Rack PDU . . . . . . . .
Streszczenie treści zawartej na stronie nr. 9
Firmware File Transfer Methods . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Using the Firmware Upgrade Utility . . . . . . . . . . . . . . . . . . . . . . . . 101 Use FTP or SCP to upgrade one Rack PDU . . . . . . . . . . . . . . . . . 101 Use XMODEM to upgrade one Rack PDU . . . . . . . . . . . . . . . . . . . 102 How to upgrade multiple Rack PDUs . . . . . . . . . . . . . . . . . . . . . . . 102 Using the Firmware Upgrade Utility for multiple upgrades . . . . . 103 Using a USB f
Streszczenie treści zawartej na stronie nr. 10
Introduction Product Features The APC by Schneider Electric Switched Rack Power Distribution Unit (PDU) may be used as a stand- alone, network-manageable power distribution device or up to 4 devices can be connected together with one network connection. The Rack PDU provides real-time remote monitoring of connected loads. User- defined alarms warn of potential circuit overloads. The Rack PDU provides full control over outlets through remote commands and user interface settings. Your unit comes
Streszczenie treści zawartej na stronie nr. 11
Access Priorities for Logging on Only one user at a time can log on to the Rack PDU. The priority for access, beginning with the highest priority, is as follows: • Local access to the command line interface from a computer with a direct serial connection to the Rack PDU • Telnet or Secure SHell (SSH) access to the command line interface from a remote computer • Web access, either directly or through StruxureWare Data Center Expert Note: See “SNMP” on page 87 for information about how SNMP acc
Streszczenie treści zawartej na stronie nr. 12
Watchdog Features Overview To detect internal problems and recover from unanticipated inputs, the Rack PDU uses internal, system- wide watchdog mechanisms. When it restarts to recover from an internal problem, a System: Warmstart event is recorded in the event log. Network interface watchdog mechanism The Rack PDU implements internal watchdog mechanisms to protect itself from becoming inaccessible over the network. For example, if the Rack PDU does not receive any network traffic for 9.5 minut
Streszczenie treści zawartej na stronie nr. 13
Specific assignment of Display IDs. Follow the instructions below before powering up any of the Rack PDUs in the group. If it is desired to have a specific assignment of Display IDs, this can be achieved by powering up the units for the first time in the desired order, 1 to 4. For example, before powering up any of the Rack PDUs connected in a group, determine the Display ID order that you would like. Then, first power up the unit that you would like to have Display ID 1. After that unit
Streszczenie treści zawartej na stronie nr. 14
Establish Network Settings Note: Disregard the procedures described in this section if you have StruxureWare Data Center Expert as part of your system. See the documentation for your StruxureWare Data Center Expert for more information. You must configure the following TCP/IP settings before the Rack PDU can operate on a network: • IP address of the Rack PDU • Subnet mask • Default gateway Note: If a default gateway is unavailable, use the IP address of a computer that is located on the same
Streszczenie treści zawartej na stronie nr. 15
When the Rack PDU reboots, the BOOTP server provides it with the TCP/IP settings. • If you specified a bootup file name, the Rack PDU attempts to transfer that file from the BOOTP server using TFTP or FTP. The Rack PDU assumes all settings specified in the bootup file. • If you did not specify a bootup file name, you can configure the other settings of the Rack PDU remotely through its “Web Interface” on page 52 or “Command Line Interface” on page 7; the user name and password are both apc,
Streszczenie treści zawartej na stronie nr. 16
Command Line Interface 1. Log on to the command line interface. See “Log on to the Command Line Interface” on page 14. 2. Contact your network administrator to obtain the IP address, subnet mask, and default gateway for the Rack PDU. 3. Use these three commands to configure network settings. (Text in italics indicates a variable.) a. tcpip -i yourIPaddress b. tcpip -s yourSubnetMask c. tcpip -g yourDefaultGateway For each variable, type a numeric value that has the format xxx.xxx.xxx.xxx. F
Streszczenie treści zawartej na stronie nr. 17
Recovering from a Lost Password You can use a local computer (a computer that connects to the Rack PDU or other device through the serial port) to access the command line interface. 1. Select a serial port at the local computer, and disable any service that uses that port. 2. Connect the serial cable (APC part number 940-0144A) to the selected port on the computer and to the Serial port at the Rack PDU. ® 3. Run a terminal program (such as HyperTerminal ) and configure the selected port for 96
Streszczenie treści zawartej na stronie nr. 18
Rack PDU Front Panel Note: Your APC product is configured so the display backlight turns off after 10 minutes of inactivity. The backlight can be turned on by depressing any button below the display. Item Function Display Shows information about the Rack PDU. In normal operation, input voltage, current, and power refreshes every five seconds. To reverse the text, press and hold simultaneously for five seconds the Main Menu ( ), Scroll ( ), and Select ( ) buttons. Main Menu button Press
Streszczenie treści zawartej na stronie nr. 19
Item Function OK, Warning, Overload LED Indicates the status of the Rack PDU load. See “Load indicator LED” on page 13. Temp/Humidity port Port for connecting an APC Temperature Sensor (AP9335T) or an APC Temperature/Humidity Sensor (AP9335TH). In and Out ports For use with the Network Port Sharing feature. USB port (For use with a flash drive for firmware upgrades - 5V @ 100ma.) Outlet status LED Illuminates green when the outlet is energized. (Each outlet has an outlet LED.) RJ-12 Seri
Streszczenie treści zawartej na stronie nr. 20
Display Tree Example 1 11 Switched Rack PDU User Guide
