Streszczenie treści zawartej na stronie nr. 1
HP R1500 G3 UP S
User Guide
Abstract
This document includes installation, configuration, and operation information for the HP R1500 G3 UPS. This documen hte p is er fosro tn who installs
and maintains power products. HP assumes you are qualified ins t erhve icing of high-voltage equipment and trained in recognizing hazards in
products with hazardous energy level s.
Part Number: 651175-002
August 2012
Edition: 2
Streszczenie treści zawartej na stronie nr. 2
© Copyright 2011, 2012 Hewlet -Ptackard Development Company, L.P . The information contained h erein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an ad w diatirornaanlty. HP shall not be liable for technical or editorial errors or omissions contained her ein. Microsoft®, Windows®, Windows Server®, and Windows Vist
Streszczenie treści zawartej na stronie nr. 3
Contents Component identification ............................................................................................................... 6 UPS R1500 G3 overview ........................................................................................................................... 6 UPS front pane ................................................................................................ l ......................................... 6 UPS front panel controls ...............
Streszczenie treści zawartej na stronie nr. 4
Power management .................................................................................................................... 29 Power Protector software .......................................................................................................................... 29 Troubleshooting .......................................................................................................................... 31 LED and audible alarm troubleshootin ............................
Streszczenie treści zawartej na stronie nr. 5
Korean notice ......................................................................................................................................... 45 Battery replacement notice ........................................................................................................................ 46 Power cord statement for Japa ................................................................................................................. n 46 Electrostatic discharge ................
Streszczenie treści zawartej na stronie nr. 6
Component identification UPS R1500 G3 overvi ew The HP UPS R1500 G3 features a 1U r-m acokunt design and offers power protection for loads up to 1440 VA/1000 W (NA), 1200 VA/900 W (JPN/TWN) or 1500 VA/1000 W ( INTL). To benefit from the latest product enhancements, update to the latest versions of UPS firmware and s oftware. NOTE: To download the latest versions of UPS firmware and software, see the HP w ebsite (http://www.hp.com/go/rackandpower). UPS front pane l Item Des
Streszczenie treści zawartej na stronie nr. 7
UPS front panel controls Item Description Function Power On/Standby button Powers up the UPS(" Powering up the UPS " on page 17 ). 1 Powers down the UP S("Powering down the UP" o S n page 21). Test/Alarm Reset button Initiates a sel-ftest ("Initiating a self-test" on page 20 ). 2 Silences UPS alarms(" Silencing an audible alarm " on page 20). UPS front panel LED indicato rs Component identification 7
Streszczenie treści zawartej na stronie nr. 8
Item LED description Load Segment 2 1 Load Segment 1 2 General Alarm 3 On Battery 4 Overload 5 Power On 6 For more information, see " LED and audible alarm troubleshootin (gon page 31)." UPS R1500 G3 NA/JPN/TWN rear pan el Item Description UPS option card slot 1 USB communications port 2 Site Wiring Fault LE D 3 Serial communications port 4 Network Transient Protector IN jac k 5 Voltage configuration DIP switches 6 Network Transient Protector OUT
Streszczenie treści zawartej na stronie nr. 9
UPS R1500 G3 INTL rear pan el Item Description UPS option card slot 1 Input power connector (IEC -320-C14 power inlet) 2 Input circuit breaker 3 USB communications port 4 Serial communications port 5 Network Transient Protector IN jac k 6 Voltage configuration DIP switche s 7 Network Transient Protector OUT ja ck 8 Load segment 1 (two IE-3 C20-C13 output receptacles for 9 surge and battery backup protectio n) Load segment 2 (two IE-3 C20-C13 output receptacles for
Streszczenie treści zawartej na stronie nr. 10
Installation Precautions Save these instructions. This document contains important safety instructions that should be followed during installation, operation, and maintenance of the UPS and batter ies. WARNING: A risk of personal injury from electric shock and hazardous energy levels exists. The installation of options and routine maintenance and service of this product must be performed by individuals who are knowledgeable about the procedures, precautions,d h anazards associated
Streszczenie treści zawartej na stronie nr. 11
• Circuit overloading—Consideration should be given to the connection of the equipment to the supply circuit and the effect that overloading of the circuits might have on overcurrent protection and supply wiring. Appropriate consideration of equipment nameplate ratings should be used when addressing this concern. • Reliable earthing—Reliable earthing of rac-mo k unted equipment should be maintained. Particular attention should be given tsou pply connections other than direct connections t
Streszczenie treści zawartej na stronie nr. 12
2. Attach the chassis to the rack using the supplied scr ews. 3. (optional) Insert the rear stabilization brackets into the mounting rails and then attach the brackets to the UPS. Connecting the batterie s WARNING: The unit contains sealed le-ac adid battery modules. To prevent fire or chemical burns: • Do not attempt to recharge batteries after removal from the u nit. • Do not disassemble, crush, or puncture the batter ies. • Do not short the external contacts of the batte rie
Streszczenie treści zawartej na stronie nr. 13
WARNING: To prevent personal injury from hazardous ene rgy: • Remove watches, rings, or other metal objec ts. • Use tools with insulated handle s. • Do not place tools or metal parts on top of batt eries. IMPORTANT: Before performing the following tasks, be sure that the unit is powered down and disconnected from the utility power sourc e. NOTE: A small amount of arcing may occur when connecting the batteries. This is normal and does not damage the unit or present any s
Streszczenie treści zawartej na stronie nr. 14
Selecting the UPS voltage configuration Using a small tool, position the DIP switches according to the desired voltage configu ration. NOTE: An asterisk (*) indicates the default sett ing. Output voltage Input voltage range DIP switch 1 DIP switch 2 100 V* 90–106 V Down Down R1500 G3 JPN/TWN 110 V 99–116 V Down Up 110 V 99–116 V Down Up R1500 G3 NA 120 V* 108–127 V Up N/A 220 V 198–233 V Down Up R1500 G3 INT L 230 V* 207–243 V Up N/A 240 V 216–254 V Down Down
Streszczenie treści zawartej na stronie nr. 15
IMPORTANT: Power protector software requires the communications port to be appropriately cabled to the host compute r. CAUTION: Only one communications port can be connected to the host computer. Connecting more than one will result in unexpected UPS behavior. If an option card is installed, the serial and USB communications ports are automatically disable d. For information about serial port pin assignment, seSe e " rial communications port pin assignme n(otn page 36)" .
Streszczenie treści zawartej na stronie nr. 16
2. Connect the equipment to the UPS Network Transient Protector OUT j ack. Connecting the UPS to utility powe r WARNING: To prevent injury from electric shock or damage to the equip ment: • Plug the input line cord into a grounded (earthed) electrical outlet that is installed near the equipment and is easily accessibl e. • Do not disable the grou nding plug on the input line cord. The grounding plug is an important safety feature. • Do not use extension cord s. 1. Connect the i
Streszczenie treści zawartej na stronie nr. 17
Charging the UPS batterie s Allow the batteries to charge before putting the UPS into se rvice. IMPORTANT: Charge the batteries for at least 24 hours before supplying backup power to devices. The batteries charge t o: • 90% of their capacity within 24 hou rs • 100% of their capacity within 48 hou rs Powering up the UPS Press and hold the Power On/Standby button (1) until the UPS beeps. The Power On, Load 1 and Load 2 LEDs illuminate, indicating that power is available at the UPS
Streszczenie treści zawartej na stronie nr. 18
1. Remove the two screws securing the UPS option slot cover plate, and then remove the cove r plate. 2. Install the UPS Network Module along the alignment channels in the optio n slot. 3. Secure the UPS Network Module using the two screws removed in st ep 1. Installation 18
Streszczenie treści zawartej na stronie nr. 19
4. If the UPS is powered up, you can be sure that the UPS Network Module is seated properly and communicating with the UPS by verifying that the UPS Data LED illuminates solid green, and then flashes regularly after 2 minute s. Connecting the UPS Network Modu le The UPS Network Module card is provided to manage the attached servers. RJ 45 network patch panel cables are required to use this car d. The RJ 45 network patch panel cables are not inclu ded. Installation 19
Streszczenie treści zawartej na stronie nr. 20
UPS operations Modes of operation The UPS has two modes of operati on: • Operate mode (on page 20) • Battery mode (on page 20 ) Operate mode In Operate mode : • Power is available at the UPS receptacl es. • The UPS charges the batteries as necessa ry. The UPS can be placed in Operate mode if either of the following conditions a pplies: • The UPS is powered u p. • The UPS is powered down and no utility power is avail able. To place the UPS in Operate mo, de press and hold the Power On/Sta
