Streszczenie treści zawartej na stronie nr. 1
MERIDIAN DSP5000 USER MANUAL
Meridian Audio Ltd
14 Clifton Road
Huntingdon
Cambridgeshire PE18 7EJ
England
Tel (0) 480 52144
Telex 32577 (MERIDN)
Fax (0) 480 459934
Meridian America Inc.
3800 Camp Creek Parkway
Building 2400 Suite 112
Atlanta GA 30331
USA
Tel (404) 344-7111
Fax (404) 346-7111
Version 4: 500 mode compatible with MSR
Surround, 2-room and Meridian Digital
Theatre: July 1994
Author: J R Stuart
“Boothroyd|Stuart Meridian”, MERIDIÅN and
Meridian Digital Theatre are registered
trademar
Streszczenie treści zawartej na stronie nr. 2
2 Contents Introduction ............................................5 Customising DSP5000: an overview .......................................... 29 About this manual ..................................5 Restoring default settings.................. 29 DSP5000 description..............................6 Storing preferred tone settings .......... 29 Master and slave speakers ..................6 How to customise DSP5000 ................ 30 Centre, left, right and surround ............6 Customising: g
Streszczenie treści zawartej na stronie nr. 3
3 Guarantee .............................................54 Type 5 setup, Meridian 500 system not using 562 ................... 58 Appendix 1 DSP5000 types.................55 Type 6 Meridian Digital Theatre......... 58 Type 1 setup, Meridian 500 Type 7 Second room in series system using 562 ...............55 Multiroom system......................... 58 Type 2 setup, Meridian CD as Type 8 Additional room in preamp (via 607), 204 Multiroom system......................... 58 connected.............
Streszczenie treści zawartej na stronie nr. 4
4 This page intentionally blank. DSP5000 User Guide
Streszczenie treści zawartej na stronie nr. 5
Introduction 5 Introduction Congratulations on choosing DSP5000 digital loudspeakers. We are confident that they will give a quality to your music that is unprecedented, and bring years of listening pleasure. This manual will enable you to get the most from them. The DSP5000 is a sophisticated product. You should therefore read all the supplied documentation before fully installing the DSP5000, particularly if you intend to customise its functions. We have supplied a Getting going sheet for thos
Streszczenie treści zawartej na stronie nr. 6
Description 6 DSP5000 description You will find it simpler to understand how the DSP5000 works if you consider it as a combination of the following components: • digital preamplifier, to select and control up to two digital sources directly, and to provide fixed and switched digital output for the other DSP5000 • digital audio processor, whose functions include decoding as well as error detection and correction • digital signal-processor, dealing with tone controls, digital crossover, dynamic b
Streszczenie treści zawartej na stronie nr. 7
Description 7 Control The DSP5000s are operated either by commands received from the Meridian System Remote (MSR) supplied with the loudspeakers, or by commands received through the communications cables of a Meridian installation (for example, from the front panel of a 562 or 601). The remote control provides enough keys to allow you to drive a Meridian installation via the DSP5000s, and this is the method to be preferred. Note If you have any 200-Series components to connect to the DSP5000, t
Streszczenie treści zawartej na stronie nr. 8
Installation 8 • hex wrench (3mm), for drive units If any of these items is missing, please contact your dealer. We suggest that you retain the packing carefully, as it provides maximum protection for the unit in transit. NOTE Take great care when unpacking or re-packing the DSP5000 that you do not put undue pressure on the front, as the drive units may be damaged if pressed. Fitting the feet It is easiest to fit the feet with the speakers upside down, before removing the inner carton or foam pa
Streszczenie treści zawartej na stronie nr. 9
Installation 9 Note Additional MSRs can be obtained from your dealer if you would prefer to have more than one. DSP5000 User Guide
Streszczenie treści zawartej na stronie nr. 10
Using DSP5000 10 Installing your DSP5000 General precautions Before carrying out any installation, you should ensure that the DSP5000 is marked with the correct voltage for your local AC supply. Should this not be the case, do not proceed, but contact your dealer. As a general rule, you should not make any connections to the DSP5000, or to any other component in your system, when the AC power supply is switched on. Customising features The DSP5000 is very flexible. Its functions can be significa
Streszczenie treści zawartej na stronie nr. 11
Using DSP5000 11 Calibration and Test are intended only for use by the factory or by service engineers. Connections For details of You will need to make four types of connection to the DSP5000: making all con- • digital audio nections, see • communications Connecting • master–slave DSP5000, on • AC power page 42 Digital audio connections will need to be made to other components in your system. Communications connections have to be made to most of the other Meridian components in your system in o
Streszczenie treści zawartej na stronie nr. 12
Using DSP5000 12 Final adjustments When you are sure that the DSP5000s are in the right places, you should adjust and finally tighten the feet with the wrench provided. We strongly suggest that you try to use the spike feet, in order to get the best sound. • Foot caps may be fitted if the spikes are unacceptable The spikes allow the DSP5000s to rest firmly on the floor. A spike passes through carpet to the wood or concrete below, and does less damage in the long run than a wide foot. The best so
Streszczenie treści zawartej na stronie nr. 13
Using DSP5000 13 Starting the DSP5000 To start the system, press any of the input keys on the MSR (CD, LP, Radio, Video, Tape 1, and Tape 2). For example: 1. Press CD In Type 1 this will select the physical input D1, and both DSP5000s will display cd 65 65 is the volume number, and cd means that the DSP5000 expects the source to be a Meridian CD player which can be controlled by the MSR. Cd would be the correct display if your CD player were not a Meridian product, in which case you could still
Streszczenie treści zawartej na stronie nr. 14
Using DSP5000 14 Basic operation of DSP5000 Note DSP5000 is factory set for the most common installation, one using the full features of a Meridian 500-Series CD player and 562 controller. We call this a Type 1 installation. For more details, see Appendix 1 on page 55. Selecting sources To switch from CD to another input, say Radio: 1. Press Radio In Type 1, this will select RD on a Meridian 562. Both DSP5000s display rd 65 Here rd means that the source is a radio tuner, and that the DSP5000 ex
Streszczenie treści zawartej na stronie nr. 15
Using DSP5000 15 Display DSP5000 displays information to help you operate it. Display information can include: • master indication – red light in the window • digital ‘overload’ – flashing yellow light in the window • blank display, in which the speaker only illuminates the display when you use the remote control • Standby indication • • • setup information during programming • selected source type • selected physical input connection • volume number • tone control information • absolute phase •
Streszczenie treści zawartej na stronie nr. 16
Using DSP5000 16 1 Here 1 is the number of the track currently playing on the disc. If the disc includes significant index points, the display will be like this: 3.4 3.4 here means track 3, index point 4. In theory, with the right disc, we could see displays of track and index up to 99.99. Index point 1 is never displayed. While the CD player is loading a disc (reading the disc’s directory), the DSP5000 will show the directory message: dir At the end of a CD, the DSP5000 will detect the lead-out
Streszczenie treści zawartej na stronie nr. 17
Using DSP5000 17 Note Subjectively one judges a volume increase of 9dB to be equivalent to a doubling of loudness, so each volume number represents about a 11% change in loudness, with nine steps to double loudness. DSP5000 User Guide
Streszczenie treści zawartej na stronie nr. 18
Using DSP5000 18 Mute To mute the sound: 1. Press Mute The display now shows that the sound is ‘attenuated’: Att. To demute (restore the sound level): 1. Press Mute The Mute key toggles between mute and demute. The system may also be demuted by selecting another source, or adjusting the volume. The menu system The DSP5000 offers a number of user choices which are normally accessed less frequently than, for example, source and volume. To make it easier to operate these less commonly used function
Streszczenie treści zawartej na stronie nr. 19
Using DSP5000 19 perhaps to compensate for a non-central listening position or a highly asymmetric layout. This is certainly not the case. Stereo sound is dependent upon time differences between the signals from the channels. To get the best out of a normal stereo system, you should be in the correct position in relation to the speakers. The balance control of the DSP5000, however, uses digital signal- processing to delay and diminish the sound in one speaker, thus effectively shifting the speak
Streszczenie treści zawartej na stronie nr. 20
Using DSP5000 20 Note This will also reset the bass and tilt controls. DSP5000 User Guide
