Streszczenie treści zawartej na stronie nr. 1
WS-7044U
Wireless 433 MHz
Miniature Wood Weather Station
Instruction Manual
Streszczenie treści zawartej na stronie nr. 2
TABLE OF CONTENTS Topic Page Inventory of Contents/Additional 3 Equipment Quick set-up guide 3 Battery installation 4-6 Time 7-8 Features: 9-15 Indoor temperature 10 Weather Forecast icons & tendency 10-13 arrows Outdoor temperature with 13-15 Minimum & Maximum Mounting 15-19 Troubleshooting 19 Maintenance and Care instructions 20 Specifications 21-22 2
Streszczenie treści zawartej na stronie nr. 3
INVENTORY OF CONTENTS 1. WS-7044U—Weather Station. 2. TX2U—Remote Temperature Sensor. 3. Three each, ½” Philips screws. 4. One strip double-sided adhesive tape. 5. Instruction manual & Warranty card. ADDITIONAL EQUIPMENT 1. Four fresh AAA 1.5V batteries. 2. One Philips screwdriver. QUICK SET-UP GUIDE 1. Insert two AAA batteries into each unit. 2. Wait 10 minutes to ensure transmission reception. 3. Set the time. 4. Mount units in desired locations. 3
Streszczenie treści zawartej na stronie nr. 4
DETAILED SET-UP GUIDE I. BATTERY INSTALLATION A. REMOTE TEMPERATURE SENSOR 1. Remove the battery cover. Place your thumb over the two air-vent slots on the face of the Remote Battery Temperature Sensor, Cover push down gently, slide battery cover down and off. 2. Observing the correct polarity, install 2 AAA batteries. The batteries will fit tightly (to avoid start-up problems make sure that they do not spring free during installation). 3. Replace the battery cover. 4
Streszczenie treści zawartej na stronie nr. 5
B. WEATHER TEMPERATURE STATION 1. Remove the battery Battery cover. Pull up and Cover out from the slot located in the central position of the battery cover. 2. Observing the correct polarity, install 2 AAA batteries. The batteries will fit tightly (to avoid start-up problems make sure that they do not spring free during installation). 3. Replace the battery cover. Note: After the batteries have been installed into the Weather Temperature Station the LCD segments shou
Streszczenie treści zawartej na stronie nr. 6
and install them again—carefully observing the polarity. C. LOW-BATTERY & BATTERY REPLACEMENT FEATURES When the batteries become weak in the Weather Temperature Station, a low battery indicator (shaped as a battery) appears in the LCD screen between the Hour display and the Minute display. When you replace the batteries in the Weather Temperature Station, the LCD screen will continue to display its stored information for 20 seconds. This means that if you can install the new
Streszczenie treści zawartej na stronie nr. 7
II. TIME A. THE TIME DISPLAY The time is displayed vertically (with the hour displayed above the minutes) rather than in the conventional horizontal format. The hour and minute displays are separated by a flashing dot, which indicates the seconds. The time is only displayed in the 12h mode, there is no 24h option. B. SETTING THE TIME Note: The “SET” and the “+” buttons are located on the backside of the Weather Temperature Station, and are labeled accordingly. If no but
Streszczenie treści zawartej na stronie nr. 8
the HOUR LCD will flash. Press the + button (repeatedly) until you reach your desired hour. 2. Press the SET button a second time. The minute digit in the MINUTE LCD will flash. Press the + button (repeatedly) until you reach your desired minute. 3. Press the SET button again to confirm settings, and to return to the normal time display. 8
Streszczenie treści zawartej na stronie nr. 9
FEATURES Note: All temperatures are read in °F, there is no option to read the temperature in °C. HOUR LCD MINUTE LCD INDOOR LCD FORECAST LCD OUTDOOR LCD MINIMUM/MAXIMUM BUTTON 9
Streszczenie treści zawartej na stronie nr. 10
I. INDOOR TEMPERATURE The Weather Temperature Station monitors the temperature within its immediate proximity, and displays this temperature in the INDOOR LCD. The temperature is monitored as soon as the batteries are installed. II. WEATHER FORECAST The weather forecasting feature is estimated to be 75% accurate. The weather forecast is based solely upon the change of air pressure over time. The WS-7044U averages past air-pressure readings to provide an accurate forecast— c
Streszczenie treści zawartej na stronie nr. 11
There are 3 possible weather icons that will be displayed in the FORECAST LCD: Sunny—indicates that the weather is expected to improve (not that the weather will be sunny). Sun with Clouds— indicates that the weather is expected to be fair (not that the weather will be sunny with clouds). Clouds with Rain—indicates that the weather is expected to get worse (not that the weather will be rainy). The weather icons change when the unit detects a change in air pressure. Th
Streszczenie treści zawartej na stronie nr. 12
change in order from: “sunny” to “sun with clouds” to “clouds with rain,” or the reverse. It will not change from “sunny” directly to “rainy,” although it is possible for the change to occur quickly. If the symbols do not change then the weather has not changed, or the change has been too slow and gradual to register. B. WEATHER TENDENCY ARROWS Other possible displays in the FORECAST LCD are 2 weather tendency arrows, one that points up (under the forecast icons) and one that
Streszczenie treści zawartej na stronie nr. 13
III. OUTDOOR TEMPERATURE—WITH MINIMUM & MAXIMUM FEATURE The Weather Temperature Station receives the outdoor temperature from the Remote Temperature Sensor, and the temperature appears in the OUTDOOR LCD. The Remote Temperature Sensor makes a temperature update every 1 minute, and transmits a new temperature to the Weather Temperature Station 3 times every 10 minutes. The Weather Temperature Station also keeps a record of the Minimum and Maximum temperatures it has recorded.
Streszczenie treści zawartej na stronie nr. 14
A. VIEWING THE MINIMUM/MAXIMUM TEMPERATURES 1. Press the circular MIN/MAX button (under all LCD displays) once. An arrow will appear and point to the “MIN” that is printed in the right-hand margin. The minimum-recorded temperature will display in the OUDOOR LCD. 2. Press the MIN/MAX a second time and the arrow will shift to point to the “MAX” that is printed in the right-hand margin. The maximum-recorded temperature is now displayed in the OUTDOOR LCD. 3. Press the MIN/MAX a th
Streszczenie treści zawartej na stronie nr. 15
B. RESETTING THE MINIMUM/MAXIMUM TEMPERATURE 1. Press and hold the MIN/MAX button for 3 seconds. This will reset all records to the current outdoor temperature. MOUNTING Note: Extreme and sudden changes in temperature will decrease the accuracy of the Weather Temperature Station, and changes in elevation will result with inaccurate weather forecasting for the next 12 to 24 hours. These changes will require a 12 to 24 hour wait before obtaining reliable data. To achieve a t
Streszczenie treści zawartej na stronie nr. 16
desired location, and wait approximately 10 minutes before permanently mounting to ensure that there is proper reception. The Weather Temperature Station should display a temperature in the OUTDOOR LCD within 3 minutes of setting-up. I. THE REMOTE TEMPERATURE SENSOR The Remote Temperature Sensor can be mounted in two ways: • with the use of screws, or • using the adhesive tape. A. MOUNTING WITH SCREWS 1. Remove the mounting bracket from the Remote Temperature Sensor. The
Streszczenie treści zawartej na stronie nr. 17
into the mounting surface. 4. Screw mounting bracket onto the mounting surface. Ensure that the screws are flush with the bracket. 5. Snap the Remote Temperature Sensor onto the mounted bracket. B. MOUNTING WITH ADHESIVE TAPE 1. With a nonabrasive solution, clean and dry the back of the mounting bracket and the mounting surface to ensure a secure hold. The mounting surface should be smooth and flat. 2. Remove the protective strip from one side of the tape. Adhere the tape to
Streszczenie treści zawartej na stronie nr. 18
II. THE WEATHER STATION The Weather Station can be mounted on the wall with the use of a wall hanging screw (not included). A. WALL MOUNTING 1. Place a screw (not included) into an appropriate wall, leaving approximately 3/16 of an inch (5mm) extended from the wall. 2. Place the Weather Station onto the screw using the hanging hole on the backside. Gently pull the Station down to lock the screw into place. TROUBLESHOOTING Problem: No outdoor temperature is displayed
Streszczenie treści zawartej na stronie nr. 19
2) Place sensor closer to station. 3) Be sure there are no obstructing objects. 4) Be sure all batteries are fresh. Problem: The LCD screens are faint/dim. Solution: Replace batteries. Note: For problems not solved, please contact La Crosse Technology. 19
Streszczenie treści zawartej na stronie nr. 20
MAINTENANCE AND CARE INSTRUCTIONS • Extreme and sudden temperature changes, vibration, and shock should be avoided to prevent damage to the units. • Clean displays and units with a soft, damp cloth. Do not use solvents or scouring agents; they may mark the displays and casings. • Do not submerge in water. • Immediately remove all low powered batteries to avoid leakage and damage. • Opening the casings invalidates the warranty. Do not try to repair the unit. Contact La Crosse Te
