Streszczenie treści zawartej na stronie nr. 1
Panasonic Broadcast
AK-HC910
Menu Information
Streszczenie treści zawartej na stronie nr. 2
Setting of Menu Items _ Configuration of menu display screen USER MENU Maintenance menu 1.MAINTENANCE MAINTENANCE 2.SETTING °° 3.CAM ID 1.BLACK SHADING 2.PED,GAMMA,FLARE 4.FILE MENU 3.KNEE,WHITE CLIP 4.R/B GAIN 5.DTL 6.GAIN,AUTO IRIS 7.S.GAIN 1 8.S.GAIN 2 9.S.GAIN 3 10.MATRIX 11.COLOR CORRECTION1 12.COLOR CORRECTION2 USER MENU Using condition setting menu SETTING °° °° 1.MODE 2.SHUTTER 3.H.PHASE Camera ID s
Streszczenie treści zawartej na stronie nr. 3
Setting of Menu Items _ USER menu (Initial screen) The readout data at start of power supply USER MENU is the data just before cutting off the power supply, and the operation is started with 1.MAINTENANCE the data. 2.SETTING 3.CAM ID 1. MAINTENANCE 4.FILE MENU It sets various adjusting data. 2. SETTING It sets various modes. 3. CAM ID It sets the camera ID. 4. FILE MENU It executes file loading and saving, and makes the basic setting of data display. Menu operation is executed by
Streszczenie treści zawartej na stronie nr. 4
Setting of Menu Items ! Maintenance menu • Move the cursor (arrow mark) to the item MAINTENANCE °° to be adjusted and press the MENU key, 1.BLACK SHADING then it enters the adjustment menu 2.PED,GAMMA,FLARE thereunder. 3.KNEE,WHITE CLIP 4.R/B GAIN • Move the cursor to MAINTENANCE and 5.DTL press the MENU key, then it returns to 6.GAIN,AUTO IRIS 7.S.GAIN 1 USER MENU. 8.S.GAIN 2 9.S.GAIN 3 10.MATRIX 11.COLOR CORRECTION1 12.COLOR CORRECTION2 1 Blac
Streszczenie treści zawartej na stronie nr. 5
Setting of Menu Items ! Maintenance menu 2 Pedestal, gamma, flare adjustment PED,GAMMA,FLARE °° °° menu M PED :+027 M PED: Master pedestal can be R PED :+000 B PED :+000 adjusted only by turning the control M GAMMA :0.45 panel VR. R GAMMA :+00 The R, G, B pedestal can be totally B GAMMA :+00 R FLARE :010 adjusted. G FLARE :000 R, B PED: R, B pede
Streszczenie treści zawartej na stronie nr. 6
Setting of Menu Items ! Maintenance menu 3 Knee&white clip adjustment menu KNEE,WHITE CLIP °° °° M KNEE POINT: Master knee point M KNEE POINT :95.00% adjustment. R KNEE POINT :+00.00% B KNEE POINT :+00.00% G, B, R knee point can be totally M KNEE SLOPE :95.00% adjusted. R KNEE SLOPE :+000 B KNEE SLOPE :+000 R, B KNEE POINT: R, B knee point A.KNEE POINT :95.00% adjustment. A.KNEE LVL :108
Streszczenie treści zawartej na stronie nr. 7
Setting of Menu Items ! Maintenance menu 4 Gain adjustment menu R/B GAIN °° °° The gain of R, B GAIN is adjusted. R GAIN :+000 The difference from the state of being B GAIN :+000 white-balanced can be adjusted. • The numeral value displayed after normal ending of AWB is “0” for both of R, B. 5 Detail adjustment menu DTL °° °° DTL: Setting of valid/invalid of detail DTL :ON function. TOTAL DTL LVL :+00 H DTL
Streszczenie treści zawartej na stronie nr. 8
Setting of Menu Items ! Maintenance menu 5 Detail adjustment menu DTL °° °° (continued from previous page) DTL :ON DTL (+): Setting of DTL at the edge in TOTAL DTL LVL :+00 H DTL LVL :11 positive direction. CRISP :02 DTL (–): Setting of DTL at the edge in LVL DEPENDENT :2 PEEK FREQUENCY :10 negative direction. KNEE APERTURE :ON DTL CLIP: Setting of clip level of DTL KNEE APA.LVL :
Streszczenie treści zawartej na stronie nr. 9
Setting of Menu Items ! Maintenance menu 7 Super gain, Detail, Pedestal-offset S GAIN 1 °° °° level setting menu TOTAL GAIN :42dB TOTAL GAIN: Total gain in analog, ° ANLG GAIN :36dB pixel addition, and memory addition is PIX MIX :06dB displayed. H DTL LVL :00 CRISP :0 ANLG GAIN: Gain setting in analog. LEVEL DEPENDENT :5 PEAK FREQUENCY :2 PIX MIX: Gain setting in horizontal pixel M GAM
Streszczenie treści zawartej na stronie nr. 10
Setting of Menu Items ! Maintenance menu 8 Matrix menu < MATRIX > Selection of table A, B or OFF. MATRIX TABLE :A Adjustment of gain of each color. MATRIX R-G :+00 MATRIX R-B :+00 MATRIX G-R :+00 MATRIX G-B :+00 MATRIX B-R :+00 MATRIX B-G :+00 9 Color correction 1 menu < COLOR CORRECTION1 > SAT PHASE Adjustment of gain (saturation) and R +00 +00 phase of each color. Mg
Streszczenie treści zawartej na stronie nr. 11
Setting of Menu Items @ Setting menu - Menu for various settings. SETTING °° °° 1.MODE 2.SHUTTER 3.H.PHASE 1 Camera mode setting menu MODE °° °° BLACK STRETCH: Setting of the BLACK STRETCH :OFF function of expanding low-brightness D5600K :OFF CABLE COMPE :0m analog video level. SUP GAIN :OFF It is set by ON/OFF. CAM ID :BAR CAM ID POSI :0 D5600K: It is able to make color
Streszczenie treści zawartej na stronie nr. 12
Setting of Menu Items @ Setting menu 1 Camera mode setting menu MODE °° °° (continued from previous page) BLACK STRETCH :OFF CAM ID POSI: It sets the display D5600K :OFF CABLE COMPE :0m position of camera ID. SUP GAIN :OFF 0: top left, 1: top right, 2: down left, CAM ID :BAR 3: down right. CAM ID POSI :0 MATRIX TABLE :OFF MATRIX TABLE: It sets A, B or OFF of COLOR CORRECTION :O
Streszczenie treści zawartej na stronie nr. 13
Setting of Menu Items # Camera ID setting menu CAM ID °° °° ID:AKHC900 $ File managing and renewing menu - File operation menu H FILE MENU °° : blinking display. FILE :USER1 SAVE FILE? :USER1 1 The file selected by FILE is loaded. SAVE : It can be selected from [PRESET/USER1 / USER2 /CURRENT]. When desired to return to the previous data after loading other file, select “CURRENT”. H FILE MENU °° FILE :USER1
Streszczenie treści zawartej na stronie nr. 14
Setting of Menu Items $ File managing and renewing menu - File operation menu H FILE MENU ° (continued from previous page) FILE :USER1 2 When saving the current data, two SAVE FILE? :USER1 SAVE : files (USER1 /USER2) can be saved. Select the file by “SAVE FILE?” Select “USER1” and move the cursor to SAVE and press the MENU key, then the item menu is displayed. 3 SAVE IN USER1. OK? “YES” and “NO” are displayed. Move the cursor from “
