Streszczenie treści zawartej na stronie nr. 1
COLOR VIDEO CAMERA
INSTRUCTIONS
TK-C9200U
TK-C9200E
TK-C9201EG
TK-C9300U
TK-C9300E
TK-C9301EG
For Customer Use:
Enter below the Serial No. which is located on the
body. Retain this information for future reference.
Model No. TK-C9200U,TK-C9200E,TK-C9201EG
TK-C9300U,TK-C9300E,TK-C9301EG
Serial No.
.
LST0984-001A
Streszczenie treści zawartej na stronie nr. 2
Introduction Contents Introduction Contents ............................................................................................................. 2 Features ............................................................................................................. 3 Operating Precautions ....................................................................................... 4 Connection/Installation Mounting the Lens .....................................................................
Streszczenie treści zawartej na stronie nr. 3
Introduction Thank you for purchasing this product. Before use, please read this "INSTRUCTIONS" and the information materials included to ensure proper use of this product. The instructions in this manual are for TK-C9200U/TK-C9200E/TK-C9201EG/TK- C9300U/TK-C9300E/TK-C9301EG. Features v Wide dynamic range (WIDE-D) function (TK-C9300U/TK-C9300E/TK-C9301EG only) v DAY/NIGHT surveillance with auto IR cut filter on/off (Color/B&W shooting) (TK-C9300U/TK-C9300E/TK-C9301EG) Easy DAY/NIGHT function (TK
Streszczenie treści zawartej na stronie nr. 4
Introduction Operating Precautions m Storage and Location of Use v Do not install the camera in the following places. - In a place exposed to rain or moisture. - In a place with vapor or oil, for example in a kitchen. - When the ambient temperature rises above or falls below the acceptable range (from -10 f to 50 f) - In a place at which corrosive gases are emitted. - Near a source of radiation, X-rays, strong radio waves or magnetism. - In a place subject to vibration. - In a place with excessi
Streszczenie treści zawartej na stronie nr. 5
Introduction v We will not be responsible for any inconveniences or disturbances caused in the event of privacy invasion as a result of camera footages of this product. m Others v When using this camera with [AGC] set to "MID" or "HIGH", the sensitivity increases automatically for dark images and the screen may appear grainy, but this is not a malfunction. v When the DAY/NIGHT switch is set to "AUTO", the image turns black-and-white in a dark location. As the sensitivity level is increased in th
Streszczenie treści zawartej na stronie nr. 6
Connection/Installation Mounting the Lens 1 Check the mounting method of the lens before mounting. This camera is compatible with CS-mount lens. To use a C-mount lens, a C-mount adapter is necessary. For details about the C- mount adapter, consult your JVC dealer. Never use a lens that exceeds the dimension (a) in the below figure as it will damage the inner part of the camera and will not allow normal installation. This will result in a malfunction. (a) Dimension (a) Flange back (b) 12.5 mm 5.
Streszczenie treści zawartej na stronie nr. 7
Connection/Installation Connection To the terminal of infrared illumination device etc. SEE INSTRUCTION D/N AUTO ON MANUAL (TK-C9300U/TK-C9300E/ BLC OFF ON LCD CRT VIDEO TK-C9301EG) (A page 8) AES OFF ON OUT MONITOR TYPE FOCUS ADJUST CLASS 2 ONLY ( ) U TYPE ISOLATED POWER SET ONLY (E TYPE) AUX GND Monitor Connect to AC 220 V- (A page 8) MENU AC 240 V power supply DC12V 1 2 AC24V (TK-C9201EG/ TK-C9301EG) Connect to AC 24V or DC 12V (A page 8) power supply (TK-C9200U/ TK-C9200E/TK-C9300U/TK-C930
Streszczenie treści zawartej na stronie nr. 8
Connection/Installation Connection (Continued) v Do not connect DC 12 V and AC 24 V cables at the same time. Memo v When using a DC 12 V power supply, ensure that the polarities of the cable are correct. m AC 220 V - AC 240 V (TK-C9201EG/TK-C9301EG) When using this camera, install it near the socket so that power disconnection may be made immediately. Connecting the Monitor Connect with a 75 K coaxial cable (BNC) such as RG-59. Connecting the Alarm Input/Output Terminal (TK-C9300U/TK- C9300E/TK-
Streszczenie treści zawartej na stronie nr. 9
Connection/Installation Mounting the Camera When mounting the camera on a fixer, pan/tilt and the like, use the camera- mounting screw hole located on the camera-mounting bracket. (Length of screw: 7 mm or less) Camera-mounting bracket fastening screws (x2: M2.6 x 6 mm) Camera-mounting screw hole MAX. 7mm Rotation-preventive hole Camera-mounting bracket . Note Use a camera-mounting screw with a length shorter than 7 mm from the camera-mounting face. Use camera-mounting bracket fastening screws
Streszczenie treści zawartej na stronie nr. 10
Connection/Installation Mounting the Camera (Continued) m Fall Prevention v Special attention is required when installing the camera to the wall or ceiling. You should not engage in the installation work yourself. Ask a professional to do the job, because injuries and accidents may occur if the camera falls. v When installing the camera on a fixer, pan/tilt unit and the like, make sure to install it firmly using a rotation-preventive hole to prevent fall. v To prevent fall, connect the camera to
Streszczenie treści zawartej na stronie nr. 11
Setting/Adjustment Switch Settings A A SEE INSTRUCTION SEE INSTRUCTION D/N AUTO D/N AUTO OFF OFF MANUAL MANUAL BLC OFF BLC OFF ON ON B B LCD CRT VIDEO LCD CRT VIDEO AES OFF ON OUT WIDE-D OFF ON OUT C C MONITOR TYPE MONITOR TYPE FOCUS E FOCUS D ADJUST ADJUST CLASS 2 ONLY CLASS 2 ONLY ( ) (U TYPE) U TYPE F F ISOLATED POWER ISOLATED POWER ( ) SET ONLY (E TYPE) SET ONLY E TYPE AUX GND (TK-C9200U/TK-C9200E/TK-C9201EG) (TK-C9300U/TK-C9300E/TK-C9301EG) . A [D/N AUTO/OFF] DAY/NIGHT Selector Switch Set t
Streszczenie treści zawartej na stronie nr. 12
Setting/Adjustment Adjusting the Back Focus This camera is adjusted to an optimum wide range before shipment but readjustment is required when using zoom lens or when the lens focus ring is out of focus. Back focus adjustment ring Lens focus ring Tighten Back focus fastening Loosen screw (M2) . m With a Fixed-Focus Lens If the focus cannot be adjusted correctly with the lens focus ring, adjust the back focus as follows. 1 Loosen the back focus fastening screw by turning it anti- clockwise with
Streszczenie treści zawartej na stronie nr. 13
Setting/Adjustment Fine-tuning the Focus When adjusting the focus of the DC IRIS lens, use the Focus Adjust mode for easy focusing as the iris opens and depth of field becomes shallower. (Refer also to the instruction manual of the lens.) m Procedure 1 Press and hold the [J] button. The Focus Adjust mode is activated and "FOCUS ADJUST MODE" appears on the screen. Contours are emphasized as the iris opens. 2 Shoot the subject. 3 Adjust the focus of the DC IRIS lens. 4 Exit the Focus Adjust mode.
Streszczenie treści zawartej na stronie nr. 14
Setting/Adjustment Adjusting the Auto White Balance Each light source has its own color temperature. Therefore, when the main light source lighting the subject is changed, adjust the white balance again. 1 Press the [MENU] button. 2 Select [WHITE BALANCE] with the [J/K] button and "AWC" with the [ H/I] button, then press the [SET] button. 3 Zoom in to fill the screen with white. Place a white object at the center of the screen, under the same lighting condition as the subject to be shot and zoom
Streszczenie treści zawartej na stronie nr. 15
Others Specifications Horizontal : 550TV lines (typical) resolution Video S/N ratio : 52 dB (typical, AGC OFF) Minimum : (TK-C9300U/TK-C9300E/TK-C9301EG) illumination Color mode: 0.05 lx (typical, 50 %, F1.2, AGC HIGH) Black and white mode: 0.002 lx (typical, 50 %, F1.2, AGC HIGH) (TK-C9200U/TK-C9200E/TK-C9201EG) Color mode: 0.05 lx (typical, 50 % 、F1.2、AGC HIGH) Black and white mode: 0.03 lx (typical, 50 %, F1.2, AGC HIGH) Lens mount : CS-mount Power supply : AC 24 V 60 Hz, DC 12 V (TK-C9200U/T
Streszczenie treści zawartej na stronie nr. 16
TK-C9200U/TK-C9200E/ TK-C9201EG/TK-C9300U/ TK-C9300E/TK-C9301EG COLOR VIDEO CAMERA Q 2009 Victor Company of Japan, Limited LST0984-001A
