Streszczenie treści zawartej na stronie nr. 1
COMPACT VHS CAMCORDER
ENGLISH
GR-AXM43
The Logical Choice
The only compact video
cassettes that can be
used with your VHS VCR*
Compact VHS
INSTRUCTIONS
LYT0075-001A EN
Streszczenie treści zawartej na stronie nr. 2
2 EN Dear Customer, Warning on lithium battery Thank you for purchasing the JVC Compact VHS The battery used in this device may present a camcorder. Before use, please read the safety fire or chemical burn hazard if mistreated. Do information and precautions contained in the not recharge, disassemble, heat above 100°C or following pages to ensure safe use of your new incinerate. camcorder. Replace the battery with Maxell, Panasonic (Matsushita Electric), Sanyo or Sony CR2025; use of another batt
Streszczenie treści zawartej na stronie nr. 3
MAJOR FEATURES CONTENTS EN EN 3 3 GETTING STARTED 4 n LCD Colour Monitor (Z pg. 14) Power ......................................... 4 n Program Manager II Clock (Lithium) Battery (Z pg. 20 – 35) Insertion/Removal ......................... 6 n Programme AE with Special Effects Date/Time Setting ........................... 7 (Z pg. 20, 21) •Auto Mode Lock Tape Length Setting .......................... 8 •Auto Mode Release Loading/Unloading A Cassette ............. 9 •Electronic Fog Filter •ND Eff
Streszczenie treści zawartej na stronie nr. 4
GETTING STARTED 4 EN Marks Power To AC outlet This camcorder’s 3-way power supply system lets you CHG. (charge) choose the most appropriate source of power. indicator NOTES: c No function is available without power supply. c Use only specified power supply. c Do not use provided power supply units with other equipment. CHARGING THE BATTERY PACK REFRESH switch SUPPLY POWER REFRESH indicator Connect the charger’s AC power cord to a wall 1 outlet. REFRESH ATTACH BATTERY PACK The AC power adapter fe
Streszczenie treści zawartej na stronie nr. 5
EN 5 CHARGE MARKER Charge marker A charge marker is provided on the battery pack to help you remember whether it has been charged or not. Two colours are provided (red and black)—you choose which one means charged and which means discharged. NOTES: c The recording time per charge is affected by such factors as the time spent in Record-Standby mode and the frequency of zooming. It is safer to have spare battery packs. c Charging times noted on page 4 are for fully discharged battery pack, and dis
Streszczenie treści zawartej na stronie nr. 6
GETTING STARTED (cont.) 6 EN Clock (Lithium) Battery Insertion/Removal A This battery is necessary for clock operation and to perform date/time settings. SWITCH OFF POWER Switch off the unit’s power and remove the power 1 supply unit. OPEN COVER Open the clock battery compartment cover while 2 pressing the release tab. REMOVE BATTERY (when replacing) Insert a pointed, non-metallic object between the 3 battery and the compartment ( A ) and pull the battery out. INSERT BATTERY Ensure that the plu
Streszczenie treści zawartej na stronie nr. 7
EN 7 Date/Time Setting ACCESS MENU SCREEN First set the Power Switch to “CAMERA”. Turn the 1 Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. SELECT FUNCTION Rotate the MENU Jog Dial to move the highlight bar 2 to “DATE/TIME”, then press it. The DATE/TIME Select Dial Setting Menu appears. •If you decide you want to return the date and time to the previous settings, rotate the MENU Jog Dial MENU to move highlight bar to “EXIT” and press it, then Jog Dial go to step 6. •
Streszczenie treści zawartej na stronie nr. 8
GETTING STARTED (cont.) 8 EN Tape Length Setting Set the tape length according to the length of the tape used. ACCESS MENU SCREEN First set the Power Switch to “CAMERA”. Turn the 1 Select Dial to any position except AUTO LOCK, then press the MENU Jog Dial. Select Dial SELECT FUNCTION Rotate the MENU Jog Dial to move the highlight bar 2 to “TAPE LENGTH”, then press it. The TAPE LENGTH Setting Menu appears. MENU Jog Dial Viewfinder SET TAPE LENGTH Rotate the MENU Jog Dial to move the highlight ba
Streszczenie treści zawartej na stronie nr. 9
EN 9 Loading/Unloading A Cassette OPEN LCD MONITOR 2 2 Open the LCD monitor to an angle of over 45 4 4 3 3 1 degrees. OPEN CASSETTE HOLDER Press EJECT until the holder opens. Do not use force 1 5 2 to open. INSERT/REMOVE CASSETTE Make sure the label is facing outward. 3 CLOSE CASSETTE HOLDER Press PUSH and make sure the holder is closed and 4 locked. Turn to take up slack. CLOSE LCD MONITOR First make sure the holder is closed. Then close the Erase Protection Gear 5 LCD monitor. NOTES: c Closing
Streszczenie treści zawartej na stronie nr. 10
GETTING STARTED (cont.) 10 EN Power Zoom Button Grip Adjustment EXPAND LOOP Separate the Velcro strip. 1 INSERT HAND Pass your right hand through the loop and grasp the 2 grip. ADJUST STRAP LENGTH Adjust so your thumb and fingers can easily operate 3 the Recording Start/Stop Button and Power Zoom Button. Refasten the Velcro strip. Recording Start/Stop Button Viewfinder Adjustment POSITION VIEWFINDER 3 Adjust the viewfinder manually for best viewability 1 (see illustration to the left). SELECT M
Streszczenie treści zawartej na stronie nr. 11
EN 11 Shoulder Strap Attachment ATTACH STRAP Following the illustration at left, thread the strap 2 1 through the top of the eyelet 1, then fold it back 3 and thread it through the keeper 2, and then 2 1 through the buckle 3. Repeat the procedure to 1 attach the other end of the strap to the other eyelet 4, making sure the strap isn’t twisted. 4 ADJUST LENGTH Adjust as shown in the illustration at left 1, then 2 slide both keepers snug against the eyelets to prevent slipping 2. Tripod Mounting A
Streszczenie treści zawartej na stronie nr. 12
RECORDING Basic Recording 12 EN LENS COVER Switch NOTE: You should already have performed the procedures listed below. If not, do so before continuing. c Power (Z pg. 4) c Tape Length Setting (Z pg. 8) c Grip Adjustment (Z pg. 10) LOAD A CASSETTE Power First open the LCD monitor to an angle of over 45 indicator 1 degrees. Press EJECT to open the cassette holder, then insert Power the cassette with the label facing out. Press PUSH to Switch ensure the holder is closed and locked. Start/Stop Butt
Streszczenie treści zawartej na stronie nr. 13
EN 13 Tape remaining time indicator STOP RECORDING 25MIN MIN Press the Recording Start/Stop Button again to stop (Now calculating) 4 recording. •The camcorder re-enters the Record-Standby 60MIN mode. 59MIN NOTES: c When the Power Switch is set to CAMERA and the LCD monitor is opened at an angle of 45 degrees or more, the 3MIN LCD monitor switches on and the viewfinder switches off automatically to save power. 2MIN c A cassette holder can’t be opened unless a power supply (Blinking) is attached.
Streszczenie treści zawartej na stronie nr. 14
RECORDING Basic Recording (cont.) 14 EN Shooting while watching the LCD monitor 90° 180° Before the following steps, perform step 1 (Z pg. 12). ENTER RECORD–STANDBY MODE Make sure the LCD monitor is fully open. Slide the 2 LENS COVER Open/Close Switch to open the lens cover, then set the Power Switch to CAMERA. •The power indicator lights and the camcorder enters the Record–Standby mode. LENS COVER Switch •The scene you’re aimed at appears in the LCD monitor, with the word “PAUSE” superimposed
Streszczenie treści zawartej na stronie nr. 15
EN 15 Journalistic shooting In some situations different angles of shooting may be required for more dramatic results. OPEN LCD MONITOR Make sure the LCD monitor is fully open. 1 TILT LCD MONITOR Tilt the LCD monitor in the most convenient 2 direction. •The LCD monitor can rotate almost full circle (270°: 90° downward, 180° upward). Interface shooting A person you shoot can view himself/herself in the LCD monitor, and you can even shoot yourself while viewing your own image in the LCD monitor. T
Streszczenie treści zawartej na stronie nr. 16
RECORDING Basic Features 16 EN FEATURE: Zooming Zoom-in PURPOSE: To produce the zoom in/out effect, or an instantaneous change in image magnification. Digital circuitly doubles the maximum 22x magnification offered by optical zoom. This system is called Digital Zoom. Zoom-out OPERATION: Zoom In Press the “T” of the Power Zoom Button. Zoom Out Press “W” of the Power Zoom Button. Zoom indicator bar n Zooming speed is available. A total of 4 zoom speeds are available. 2 speeds can be selected depe
Streszczenie treści zawartej na stronie nr. 17
EN 17 FEATURE: Quick Review PURPOSE: To check the end of the last record- ing. OPERATION: 1) Press “ ” and release quickly during the Record–Standby mode. RETAKE (R/F) n Tape is rewound for about 2 seconds and played back automatically, then pauses in Record–Standby mode for the next shot. NOTE: Distortion may occur at start of playback. This is normal. FEATURE: Retake PURPOSE: To re-record certain segments. OPERATION: 1) Make sure the camcorder is in the Record–Standby mode. 2) Press either RET
Streszczenie treści zawartej na stronie nr. 18
RECORDING Basic Features (cont.) 18 EN FEATURE: Picture Stabiliser PURPOSE: To compensate for unstable images P. STABILIZER caused by camera-shake, particularly at high magnification. OPERATION: 1) Press P. STABILIZER. “ ”appears. n To switch off the Picture Stabiliser, press P. STABILIZER. The indicator disappears. NOTES: c Accurate stabilisation may not be possible if hand shake is excessive, or under the following conditions: • When shooting subjects with vertical or horizontal stripes. • Wh
Streszczenie treści zawartej na stronie nr. 19
EN 19 DATE/TIME FEATURE: Date/Time/Character Insert PURPOSE: To display the date and time on the LCD monitor, in the viewfinder, or on a connected colour monitor, as well as to record them manually or automatically. OPERATION: 1) Turn the Select Dial to any position except AUTO LOCK. 2) Choose a display mode by Display pressing DATE/TIME repeatedly while in Record-Standby to cycle through the modes as shown in the Select Dial illustration to the left. n You should have already performed the Date
Streszczenie treści zawartej na stronie nr. 20
D N G F E E S A D E O L E M R O T K RECORDING Advanced Features 20 EN Programme AE With Special Effects 1 second later, the mode is activated. All you have to do to access any of the variety of After 1 sec. SEPIA shooting effects is to turn the Select Dial. SELECT MODE Turn the Select Dial until the symbol of the function 1 you want is aligned with the mark. •The selected mode’s name and its indication are LCD monitor or displayed for approx. 1 second. Then the name viewfinder disappears, and o
