Streszczenie treści zawartej na stronie nr. 1
CID 2905 Caller ID
with Call Reject
Owner’s Manual
Please read before using this equipment.
Streszczenie treści zawartej na stronie nr. 2
Contents Important Information ......................... 4 Features ............................................... 8 Preparation ........................................ 10 Installing Batteries/Setup ............. 10 Adjusting the Display’s Contrast .........................13 Connecting to the Phone Line ...... 13 Connecting to an Answering Machine ...................... 14 Mounting the CID ......................... 15 Operation ........................................... 16 Incoming Calls
Streszczenie treści zawartej na stronie nr. 3
WARNING: To reduce the risk of fire or shock hazard, do not expose this product to rain or moisture. CAUTION RISK OF ELECTRIC ! SHOCK. DO NOT OPEN. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSON- NEL. This symbol is intended to alert you to the presence of uninsu- lated dangerous voltage within the product’s enclosure that might be of sufficient magni- tude to constitute a risk of electric shock.
Streszczenie treści zawartej na stronie nr. 4
Important Information • To use this Caller ID (CID), you must be in an area where Caller ID service is available, and you must subscribe to the service. • Where Caller ID is offered, one or more of the following options are gen- erally available: – caller’s number only – caller’s name only – caller’s name and number Your CID displays the caller’s name only if that option is available in your area. • The actual number of Caller ID records your CID will store depends on the amount of Caller ID
Streszczenie treści zawartej na stronie nr. 5
FCC INFORMATION We have designed your CID to conform to federal regulations, and you can connect it to most telephone lines. However, each CID (and each device, such as a tele- phone or answering machine) that you connect to the telephone line draws power from the line. We refer to this power draw as the device’s ringer equivalence num- ber, or REN. The REN is on the bottom of your CID. If you use more than one phone or other device on the line, add up all the RENs. If the total is more than fiv
Streszczenie treści zawartej na stronie nr. 6
• most electronic key telephone sys- tems In the unlikely event that your CID causes problems on the phone line, the phone company can temporarily disconnect your service. If this happens, the phone com- pany attempts to notify you in advance. If advance notice is not practical, the phone company notifies you as soon as possible and advises you of your right to file a com- plaint with the FCC. Also, the phone company can make changes to its lines, equipment, opera- tions, or procedures that coul
Streszczenie treści zawartej na stronie nr. 7
To eliminate interference, you can try one or more of the following corrective mea- sures: • Reorient or relocate the TV or radio’s receiving antenna. • Increase the distance between the CID and the radio or TV. • Use outlets on different electrical cir- cuits for the equipment and the radio or TV. Consult your local RadioShack store if the problem continues. LIGHTNING Your CID has built-in protection circuits to reduce the risk of damage from surges in telephone and power line current. These pr
Streszczenie treści zawartej na stronie nr. 8
Features Your RadioShack Caller ID displays the caller’s telephone number (including name, if available in your area) and the date and time the call was received, as provided by your local phone company to Caller ID service subscribers. Note: Check with your local phone com- pany regarding name service availability. Your CID includes these features: Call Reject — lets you to play a prere- corded message when you receive an un- wanted call. 50 Caller ID Memory— stores up to 50 name and number C
Streszczenie treści zawartej na stronie nr. 9
Message Waiting — tells you when you have received a voice mail message (if you subscribe to the message waiting ser- vice from your local phone company). Note: The Message Waiting feature does not work with stutter dial tone service. Check with your telephone company for the type of service you have. Trilingual Operation — lets you select English, French, or Spanish as the mes- sage display. Clock — displays the current time and date as provided to Caller ID service sub- scribers by your local
Streszczenie treści zawartej na stronie nr. 10
Preparation INSTALLING BATTERIES/ SETUP You need three AAA batteries (not sup- plied) to power your Caller ID (CID). For the longest operation and best perfor- mance, we recommend alkaline batteries, available at your local RadioShack store. Cautions: • Always use fresh batteries of the required size and recommended type. • Do not mix old and new batteries, dif- ferent types of batteries (alkaline, standard, or rechargeable), or rechargeable batteries of different capacities. Follow these step
Streszczenie treści zawartej na stronie nr. 11
polarity symbols (+ and –) marked inside. 3. Turn the CID over so you can see the display. After you install the batteries, I; I; I; I;J JJ J B7D=K B7D=K B7D=K B7D=K7 7 7 7=; =; =; =; flashes briefly, then ;D=B ;D=B ;D=B ;D=B?I> ?I> ?I> ?I> (the default display language) flashes for about 10 seconds. Note: If you do not press any button for about 10 seconds, the CID auto- matically selects English and the time and date appear. 4. To select another language, press REVIEW 8 8 8 8.
Streszczenie treści zawartej na stronie nr. 12
Caution: If you do not plan to use the CID for a month, remove the batteries. Batter- ies can leak chemicals that can destroy electronic parts. Notes: • Before you replace the batteries, have fresh ones on hand. If you do not install new batteries within about 2 minutes after removing the old ones, the CID records and the date and time will be lost. The records cannot be replaced, but the date and time will automatically reset when you receive the next call. • Unplug the modular line cord from
Streszczenie treści zawartej na stronie nr. 13
ADJUSTING THE DISPLAY’S CONTRAST Your CID has eight display contrast set- tings (0–7). Follow these steps to adjust the display’s contrast. 1. Hold down DELETE and REVIEW 9 9 9 9 until 9EDJH7IJ 9EDJH7IJ 9EDJH7IJ 9EDJH7IJ N N N N (N N N N equals the current contrast setting) appears. 2. Continue to hold down DELETE and press REVIEW 8 8 8 8 or 9 9 9 9 to select the desired contrast setting. 3. Release DELETE. The date and time appear. CONNECTING TO THE PHONE LINE The CID connects to any modular
Streszczenie treści zawartej na stronie nr. 14
1. Disconnect your telephone’s line cord from the modular phone line jack and plug it into the CID’s PHONE jack. 2. Plug one end of the supplied modular line cord into the CID’s LINE jack. 3. Plug the cord’s other end into the modular phone line jack. CONNECTING TO AN ANSWERING MACHINE PHONE LINE 1. Disconnect the modular line cord that connects your answering machine to the modular phone line jack, then plug it into the CID’s PHONE jack. 2. Plug one end of the supplied modular line cord into t
Streszczenie treści zawartej na stronie nr. 15
4. Set your answering machine to answer after two or more rings. This gives the Caller ID time to record the call information that the phone com- pany sends between the first and second rings. MOUNTING THE CID You can place the CID on a flat surface, or you can mount it on a wall. Follow these steps to mount the CID on a wall. 1. Select a location near the phone line jack, then use the round holes in the mounting bracket as a template to mark the mounting screw locations on the wall. 1 2. Drill
Streszczenie treści zawartej na stronie nr. 16
To remove the bracket from the CID, slide the bracket down then lift and remove it. Operation INCOMING CALLS When you subscribe to Caller ID service from your phone company, the phone company sends the caller’s phone num- ber (and name, if available) and the call’s time and date between the first and sec- ond rings. Your CID receives and displays this information for each call and updates the current date and time. You cannot manually set the date and time. 97BB 97BB 97BB 97BB and the CALL ind
Streszczenie treści zawartej na stronie nr. 17
USING CALL REJECT When you receive a call you do not want to answer, press CALL REJECT. The CALL REJECT indicator lights and the CID announces “We don’t accept calls of this nature. Please remove our phone number from your calling list. Thank you.” Note: The CID displays the caller’s phone number until you delete it (see “Deleting Caller ID Records” on Page20). MESSAGE WAITING Note: The message waiting feature does not work with stutter dial tone service. Check with your phone company for the ty
Streszczenie treści zawartej na stronie nr. 18
company sends the information after you end the current call and C;II7=; C;II7=; C;II7=; C;II7=; M7?J?D M7?J?D M7?J?D M7?J?D= = = = appears on the display. In some areas, callers can block the send- ing of their Caller ID information. When a caller blocks the Caller ID information, #### FH FH FH FH?L7J; ?L7J; ?L7J; ?L7J; 97BB¶ 97BB¶ 97BB¶ 97BB¶ appears instead of the call information. REVIEWING CALL RECORDS Each time you receive a call, your CID stores a record that you can see while you are on
Streszczenie treści zawartej na stronie nr. 19
Note: The CID shows up to 10 digits of an incoming phone number. If the number is longer, you see only the last 10 digits. Caller ID Messages Display (English, French, Description Spanish) Appears the first time D;M D;M D;M D;Mýýýý97BBâIáý 97BBâIáý 97BBâIáý 97BBâIáýN N N NN N N N you review a new call (three languages) record. (NN NN is the NN NN number of new calls.) #F #FH?L H?L7 7J; J; 97BB# 97BB# The caller has #F #FH?L H?L7 7J; J;97BB# 97BB# 7FF; 7FF;BB F;HIE F;HIEDD;B DD;Býý blocked t
Streszczenie treści zawartej na stronie nr. 20
Display (English, French, Description Spanish) The caller is not #E #E #E #EKJýE KJýE KJýE KJýE<ý <ý <ý <ý7H;7# 7H;7# 7H;7# 7H;7# within a Caller ID ser- #> #> #> #>EHI EHI EHI EHI PED PED PED PED; ; ; ;#### vice area. No call #< #< #< #
