Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
INTRODUCTION ...................................... 2 MAINTENANCE ..................................... 26 Woodstock Technical Support ..................2 General .......................................... 26 Machine Specifications ..........................3 Cleaning ......................................... 26 Controls and Features ...........................4 V-Belts ........................................... 26 Lubrication ...................................
Streszczenie treści zawartej na stronie nr. 4
® Your new 6" Benchtop Jointer has been specially designed to provide many years of trouble- free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product. We stand behind our machines! In the event that questions aris
Streszczenie treści zawartej na stronie nr. 5
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz T ype .................................................................................................................... Universal Horsepower ................................................................................................................. 2 HP Voltage ......................................................................................................................1
Streszczenie treści zawartej na stronie nr. 6
C A B K D J H L G F E 2. W1814 identification — back view. 1. W1814 identification — front view. Fence Bracket Assembly Outfeed Table Fence Tilting Handle Cutterhead Guard Fence Sliding Handle Fence Infeed Table Depth of Cut Adjusting Knob ON/OFF Switch Dust Collection Chute Dust Collection Bag Push Blocks (not shown) -4- -4-
Streszczenie treści zawartej na stronie nr. 7
Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury. Indicates a potentially hazardous situation which, if not avoided, MAY result in minor or moderate injury. This symbol is used to alert the user to useful information about proper operation of the equipment, and/or a situation that may cause damage to the mac
Streszczenie treści zawartej na stronie nr. 8
Turn power and allow all moving parts to come to a complete stop before leaving machine unattended. DO NOT use machinery in damp, wet locations, or where any flammable or noxious fumes may exist. Clutter and dark shadows may cause accidents. Undersized cords over- heat and lose power. Replace extension cords if they become damaged. DO NOT use extension cords for 220V machinery. . Make sure switch is in OFF position before reconnecting. Keep blades sh
Streszczenie treści zawartej na stronie nr. 9
“Kickback” is when the workpiece is thrown off the jointer table by the force of the cutterhead. Always use push blocks and safety glasses to reduce the likelihood of injury from “kickback.” If you do not understand what kickback is, or how it occurs, DO NOT operate this machine. Keep the top edge of the outfeed table aligned with the edge of the knife at top dead cent
Streszczenie treści zawartej na stronie nr. 10
Correct operator and workpiece position, guard is in place, and push blocks are being used. Never surface plane without push Never stand directly behind the blocks! workpiece! Never plane/edge-joint with Never joint end grain! the guard removed! -8-
Streszczenie treści zawartej na stronie nr. 11
The Model W1814 is wired for 110V operation. We recommend connecting this machine to a dedicated 8 5-15 plug and receptacle. circuit with a verified ground, using the circuit size below as a minimum. Never replace a circuit breaker with one of higher amperage without consulting a qualified electrician to ensure compliance with wiring codes. This machine must be grounded! The electrical cord supplied with this machine comes with a grounding pin. If your out
Streszczenie treści zawartej na stronie nr. 12
The Model W1814 has been carefully pack- aged for safe transporting. If you notice the machine has been damaged, please contact your authorized dealer immediately. The following items are needed, but not included, to set up your machine: • People for Lifting .............................. As Needed • Straightedge ................................................1 • Machinist's Combination Square .........................1 • Flat Head Sc
Streszczenie treści zawartej na stronie nr. 13
The following is a description of the items shipped with ® the Model W1814. 8 & 9) Jointer Bed Assembly .....................................1 Fence ........................................................1 Dust Collection Bag .......................................1 Dust Collection Bag Clamp ...............................1 Dust Chute ..................................................1 Fence Suppor
Streszczenie treści zawartej na stronie nr. 14
Consider existing and The table and other unpainted parts of your anticipated needs, size of material to be jointer are coated with a waxy grease that processed through the machine, and space protects them from corrosion during shipment. for auxiliary stands, work tables or other Clean this grease off with a solvent cleaner or machinery when establishing a location for citrus-based degreaser. DO NOT use chlorine- your jointer. based solvents such as brake parts cleaner or ace
Streszczenie treści zawartej na stronie nr. 15
The Model W1814 MUST be securely fastened to a workbench before it can be safely operated. An unsecure jointer may shift during operation and cause serious personal injury. The strongest bench mounting option is a "Through Mount" where holes are drilled all the way through the workbench, and hex bolts, washers, and hex nuts are used to secure the jointer to the workbench. Another option for mounting is a "Direct Mount" where the machine is simply secured to the workbench with lag
Streszczenie treści zawartej na stronie nr. 16
DISCONNECT JOINTER FROM POWER SOURCE! Cap Screws Use two of the included cap screws and lock washers to attach the fence support to the jointer bed, as shown in 12. Fence Jointer Bed Support 12. Attaching the fence support to the bed assembly. Insert the locking plate assembly into the fence Locking Plate support, positioning it so the two pins are against Assembly the bottom edge of the fence support, as shown in 13. Locking Plate Pins 13. Inserting the locking plate. Se
Streszczenie treści zawartej na stronie nr. 17
Use the remaining four cap screws and washers to attach the fence to the fence bracket assembly, as Bracket shown in 15. Assembly Cap Screws Fence 15. Attaching the fence to the fence bracket assembly. Slide the fence bracket assembly over and onto the dovetail of the support and locking plate, as shown Fence in 16. Bracket Assembly Fence Support Dovetail 16. Sliding the fence bracket onto the fence support dovetails. Slide the fence forward until it contacts the Fence cutt
Streszczenie treści zawartej na stronie nr. 18
Install the fence tilting handle by screwing the handle shaft into the bracket assembly, as shown in . Outward Stop Bracket Fence Tilting The knives MUST be level with the outfeed table when Assembly Handle Shaft they are at top dead center (their highest point during rotation) or the workpiece cannot be safely fed across the Installing the fence tilting jointer. handle. To check the knife height, do these steps: 1. DISCONNECT JOINTER FROM POWER SOURCE! Place a straight
Streszczenie treści zawartej na stronie nr. 19
Loosen the two jack screws, then, using a scrap wood block, push the knife blade down until both ends are sightly below the straightedge. Using the 4mm hex wrench, turn each jack screw 1 clockwise ⁄8 of a turn at a time until each end of the knife (see 22) touches the straightedge evenly. Rotate the cutterhead without disturbing the knife clamp to check the knife height. 22 Checking each end of the knife — If the cutterhead knife is even with or brushes the with a straightedge.
Streszczenie treści zawartej na stronie nr. 20
Once the assembly is complete, test run your machine to make sure it runs properly. If, during the test run, you cannot easily locate the source of an unusual noise or vibration, stop using the machine immediately, then review the on If you still cannot remedy a problem, contact our Tech Support at (360) 734-3482 for assistance. Read the entire instruction manual first! Make sure the cutterhead guard fully covers the cutterhead. Make sure all tool
