Streszczenie treści zawartej na stronie nr. 1
Streszczenie treści zawartej na stronie nr. 2
210-1 211 244 211 207 210-2 240V2 211 211 Model W1812 Variable Speed Planer/ Moulder With Stand Manual Update Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz Improvements to this machine were made since the manual was originally printed, and this manual update covers those changes. Keep this page with your owner's manual in case you ever need to refer to it. For improved shipping stability, we added an New and Updated Parts Added updated shippin
Streszczenie treści zawartej na stronie nr. 3
Streszczenie treści zawartej na stronie nr. 4
Woodstock Technical Support ..................2 Controls and Features ...........................3 General .......................................... 33 Machine Specifications ..........................4 Cleaning ......................................... 33 Cleaning Feed Motor ........................... 33 Standard Machinery Safety .....................6 Table and Base .................................. 33 Additional Safety for Planer/Moulders .......8 Lubricati
Streszczenie treści zawartej na stronie nr. 5
This machine has been specially designed to provide many years of trouble-free service. Close attention to detail, ruggedly built parts and a rigid quality control program assure safe and reliable operation. Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product. We stand behind our machines! In the event that question
Streszczenie treści zawartej na stronie nr. 6
C D N M F B E G O H A P I J Q L K R 1. W1812 Front and rear view. . Feed Motor . Headstock Lock Lever . Handwheel Scale . Chip Deflector Lock Pin . Headstock Height Handwheel . Cabinet Door . Dovetailed Column . Belt Cover . Headstock Scale . Dust Cover w/Port . Control Panel . Guide Rail Lock Lever . Feed Speed Control Dial . Guide Rail Set . Emergency Stop Button . Cast Iron Table and Wings . Cutterhead ON Button . Vented Sheet Metal Cabinet -3-
Streszczenie treści zawartej na stronie nr. 7
Phone #: (360) 734-3482 • Online Tech Support: tech-support@shopfox.biz • Web: www.shopfox.biz Weight .................................................................................................................. 306 lbs. 1 Length ...................................................................................................................... 36 ⁄4" Width ............................................................................................
Streszczenie treści zawartej na stronie nr. 8
Maximum Planing Width ............................................................................................... 7" 1 Maximum Planing Depth ............................................................................................. ⁄8" 1 Maximum Planing Height ........................................................................................... 7 ⁄2" 3 Maximum Profile Width ...............................................................................
Streszczenie treści zawartej na stronie nr. 9
-6-
Streszczenie treści zawartej na stronie nr. 10
-7-
Streszczenie treści zawartej na stronie nr. 11
. . . . . . 1. INSTRUCTION MANUAL. This machine presents significant safety hazards to untrained users. Read/ understand this entire manual before starting the planer/moulder. 2. REACHING INSIDE PLANER/MOULDER. Never reach inside planer/moulder or remove covers when the planer/moulder is connected to power. 3. INFEED CLEARANCE SAFETY. The infeed roller is designed to pull material into
Streszczenie treści zawartej na stronie nr. 12
. . The Model W1812 is wired for 220V single-phase 2. 6-15 plug and receptacle. operation. The power supply circuit used for this machine MUST be grounded and rated for the amperage given below. Never replace a circuit breaker with one of higher amperage without consulting a qualified electrician to ensure compliance with wiring codes. This machine must be connected to a grounded circuit! Read Page 39 A plug is not supplied with
Streszczenie treści zawartej na stronie nr. 13
This machine has been carefully packaged for safe transportation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. The following is a description of the main components shipped with the Model W1812. Lay the components out to inventory them. . D 3) B A. Dust Port ............................................
Streszczenie treści zawartej na stronie nr. 14
This machine distributes a The table and other unpainted parts of your planer/moulder are coated with a waxy grease heavy load in a small footprint. Some residential floors may require additional that protects them from corrosion during shipment. Clean this grease off with a solvent bracing to support both machine and operator. cleaner or citrus-based degreaser. DO NOT use chlorine-based solvents such as brake parts Consider existing and cleane
Streszczenie treści zawartej na stronie nr. 15
The Model W1812 can be moved for short distances if two people lift the ends of the cast iron extension wings and walk the machine to the new location. For ease of mobility, the machine can be placed on a Shop Fox Model D2057 Heavy Duty Mobile Base. For long distance moving, we recommend using a forklift or other mechanical lifting device. Although not required, for increased stability you can mount your new machine to the floor. Becau
Streszczenie treści zawartej na stronie nr. 16
. With the help of an assistant, lay the stand on 3 1 its side, then insert the ⁄8" x 16 x 1 ⁄4" hex bolts 3 through the rubber feet, then thread on a ⁄8" x 16 hex nut onto each bolt. 3 ⁄8" Diameter Reinforced . Next, thread each bolt into the reinforced holes Mounting shown in 7, and then thread the four Hole 3 ⁄8" x 16 hex nuts onto each bolt to lock remaining the feet in place. 7. Foot installation. Note: For a pre-made heavy-
Streszczenie treści zawartej na stronie nr. 17
. Place the belt onto the cutterhead pulley with the Pulley belt direction arrow pointing the direction of pulley Rotation rotation. When installed correctly, the internal belt Arrow tangs must be facing against the pulley rotation arrow shown in 10. Internal Belt Tang 10. Installing the drive belt (belt cover removed for clarity). . Next, while keeping your fingers clear, lift the motor and roll the belt onto the motor pulley as shown in 11. 11. Installi
Streszczenie treści zawartej na stronie nr. 18
. Feed the switch pedestal wiring harnesses into the cabinet through the hole in the cabinet and secure the switch pedestal to the cabinet ( 13) with 5 3 5 three ⁄16"-18 x ⁄4" hex bolts and ⁄16" flat washers. . Plug the harnesses into their respective sockets just below the pedestal mounting. Switch Pedestal Mounting Bracket 13. Switch pedestal installation. . Insert the feed motor wiring harness through the conduit and loom clamps, and then plug it into
Streszczenie treści zawartej na stronie nr. 19
. Install the dust hood ( 16) with three #10-24 x 1 Dust ⁄2" flange screws. Hood . Install a 4" flexible dust collector suction hose to the dust port, as shown in 16. Do not confuse this CFM recommendation with the rating of the dust collector. To determine the CFM at the dust port, you must take into account many variables, 16. Installing the dust hood. including the CFM rating of the dust collector, the length of hose between the dust collector and
Streszczenie treści zawartej na stronie nr. 20
If, during the test run, you encounter an unusual noise or vibration, stop using the machine immediately, then review on for correction. If you still cannot remedy a problem, contact our Tech Support at (360) 734-3482 for assistance. . Make sure you understand the safety instructions at the beginning of the manual, and verify that the . machine is setup properly. . . Ensure all tools and objects used during setup are cleared away
