Instrukcja obsługi Wasp Bar Code WPA206

Streszczenie treści zawartej na stronie nr. 1

5. Connect the USB Cable / Cradle After powering on the unit, follow the
WPA206 onscreen prompts to set up the
and Charge the Main Battery
unit and set the time zone. The correct
Connect the USB connector to an
time zone is very important. Based on the
available USB port on the back of your
time zone you set, the date and time will
PC.
be synced with the PC each time the unit
is connected and synced.

7. Install ActiveSync software
WPA206
Using the included Microsoft ActiveSync

Streszczenie treści zawartej na stronie nr. 2

Steps for getting started Gently turn both screws counterclockwise with your WPA206 mobile with the screwdriver. They will only turn device one quarter turn, and then the screws will pop up. When both screws have popped up, use the strap to gently pull up on the 1. Unpack bottom of the door. The door is hinged to the unit at the top of the compartment. Open the box and remove all the pieces from Take the door completely off. their protective packaging. Battery Door Parts include