Instrukcja obsługi Atlantis Land I-FLY A02-WAP-54G

Streszczenie treści zawartej na stronie nr. 1

I-Fly Wireless Access Point

Quick Start Guide
A02-WAP-54G/G2 (February 2004)V1.00

Streszczenie treści zawartej na stronie nr. 2

I-Fly Wireless Access Point For more detailed instructions on configuring and using the I- Storm Lan Router ADSL, please refer to the online manual. 1.1 Package contents Make sure that you have the following items: • I-Fly Wireless Access Point • Network cable (CAT 5) • Power Adapter AC-DC (5V, 2A) • CD-ROM (with manual, software and driver) • This Quick Start Guide If any of the above items are missing, please contact your reseller. 1.2 Cabling Connect to RJ45 ports by an Et

Streszczenie treści zawartej na stronie nr. 3

I-Fly Wireless Access Point 1.3 The Front Panel LEDs LED MEANING ON=Indicates proper connection to power supply. OFF= The unit is not receiving power POWER ON= Indicates connection is established. BLINKING= Data transmissions LAN OFF= No LAN connections ON= Link is established BLINKING= Packet transmit or receive activity WLAN OFF= No Link activity 3

Streszczenie treści zawartej na stronie nr. 4

I-Fly Wireless Access Point 1.4 The Rear Ports PORT MEANING Receptor for the Power Adapter POWER (Jack) Auto MDI/MDIX LAN ports automatically sense the LAN cable type when connecting to Ethernet-enabled computers. After the device has turned on, press it (10s) to reset the RESET device or restore to factory default settings. 1.5 Default Settings Before you configure this I-Fly WirelessAccess Point, you need to know the following default settings. Below the I-Fly Access Poi

Streszczenie treści zawartej na stronie nr. 5

I-Fly Wireless Access Point Never use remote connection • • Use remote connection if another network connection isn’t available 1.7 Browser configuration Open the web browser, enter the local port IP address of this I- Fly Router, which default at 192.168.1.1, and click “Go” to get the login page. The default username is admin, password admin and click “OK” to continue. If the Wizard Quick Setup doesn't automatically depart, press on the button Wizard. 5

Streszczenie treści zawartej na stronie nr. 6

I-Fly Wireless Access Point 1.8 Quick Setup with Wizard Setup wizard is provided as the part of the web configuration utility. You can simply follow the step-by-step process to get your wireless router configuration ready to run in 4 easy steps by clicking on the “Wizard” button on the function menu. The following screen will appear. Please click “Next” to continue. Step 1: Set your new Password You can change the password as you like and then click “Next” to continue. 6

Streszczenie treści zawartej na stronie nr. 7

I-Fly Wireless Access Point Step 2: Set SSID and channel Type the SSID in the text box and select a communications channel. The SSID and channel must be the same as wireless devices attempting communication to the router. You can select the channel range of 1 to 13 for European (ETSI) domain. Step 3: Set Ecryption To enable WEPsecurity, there are 2 types to select – 64bits and 128 bits. When it is selected, the key value must be entered in HEX format. 7

Streszczenie treści zawartej na stronie nr. 8

I-Fly Wireless Access Point Step 4: Restart The Setup wizard is now completed. The new settings will be effective after the Wireless AP restarted. Please click “Restart” to reboot the router. If you do not want to make any changes, please click “exit” to quit without any changes. 8

Streszczenie treści zawartej na stronie nr. 9

I-Fly Wireless Access Point Click “Close” to finish the AP Wizard. 9