Streszczenie treści zawartej na stronie nr. 1
SLI-5310/SLI-5310-I IAD
User’s Manual
Rev: 1.3
2007/03/30
No part of this publication may be reproduced in any form by any means without the prior written permission.
Other trademarks or brand names mentioned herein are trademarks or registered trademarks of their respective
companies.
i
Streszczenie treści zawartej na stronie nr. 2
ADSL Router User Manual C Co op py yr riig gh htt N No ottiic ce e © 2006 All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, for any purpose, without the express written permission of the seller. Disclaimer Disclaimer Information in this document is subject to change without notice. The statements, configurations, technical data, and recomme
Streszczenie treści zawartej na stronie nr. 3
S Sa affe etty y a an nd d P Pr re ec ca au uttiio on n For Installation Use only the type of power source indicated on the marking labels. Use only power adapter supplied with the product. Do not overload wall outlet or extension cords as this may increase the risk of electric shock or fire. If the power cord is frayed, replace it with a new one. Proper ventilation is necessary to prevent the product overheating. Do not block or cover the slots and openings on the d
Streszczenie treści zawartej na stronie nr. 4
ADSL Router User Manual F FC CC C This equipment must be installed and operated in accordance with provided instructions and a minimum 20 cm spacing must be provided between computer mounted antenna and person’s body (excluding extremities of hands, wrist and feet) during wireless modes of operation. FCC Class B Notice FCC Class B Notice This device complies with Part 15 of the FCC Rules. Operation is subject to the follow
Streszczenie treści zawartej na stronie nr. 5
Before You Use Before You Use Thank you for choosing this Integrated Access Device. With the asymmetric technology, this device runs over standard copper phone lines. In addition, ADSL allows you to have both voice and data services in use simultaneously all over one phone line. SLI-5310/SLI-5310-I IAD is a DSL broadband access device which allows ADSL connectivity while providing voice over IP function for home or office users. It supports ADSL2/ADSL2+ and is backward compatible to A
Streszczenie treści zawartej na stronie nr. 6
ADSL Router User Manual ADSL2 Compliance ITU G.992.3 Annex A (G.dmt.bis) Maximum Rate: 12 Mbps for downstream and 1 Mbps for upstream ADSL2+ Compliance ITU G.992.5 Annex A Maximum Rate: 24 Mbps for downstream and 1.2 Mbps for upstream Voice over IP Features Call Feature: basic outgoing and incoming call, Call Waiting, Three Party Conference, Call Transfer, Caller ID Call Control: support MGCP (RFC2705) or SIP (RFC
Streszczenie treści zawartej na stronie nr. 7
Before You Use OAM F4/F5 End-to-End/Segment Loopback Cells Bridging Features Supports self-learning bridge specified in IEEE 802.1d Transparent Bridging Supports up to 4096 learning MAC addresses Transparent Bridging among 10/100 Mb Ethernet and USB Supports IGMP Snooping Supports 802.1Q VLAN packet pass-through Routing Features NAT (Network Address Translation) / PAT (Port Address Translation) let multipl
Streszczenie treści zawartej na stronie nr. 8
ADSL Router User Manual The boot loader contains very simple web page to allow the users to update the run-time firmware image. Configuration file backup and restore SNMPv1/v2 agent with MIB-II, ADSL Line MIB Subscription for ADSL Service To use the IAD, you have to subscribe for ADSL service from your broadband service provider. According to the service type you subscribe, you will get various IP addresses: Dynamic IP:
Streszczenie treści zawartej na stronie nr. 9
Chapter 1: Overview Chapter 1: Overview This chapter provides you the description for the LEDs and connectors on the front and rear surface of the router. Before you use/install this IAD, please take a look at the information first. Physical Outlook Front Panel The following illustration displays the front panel of this IAD: LED Indicators This IAD is equipped with several LEDs on the front panel as described in the table below: Function Color Definition Off Power is off. Solid
Streszczenie treści zawartej na stronie nr. 10
ADSL Router User Manual Rear Panel The following figure illustrates the rear panel of your IAD: Connector Description Phone Phone set connector PSTN PSTN connector DSL RJ-11 connector Ethernet 1 - 4 Ethernet 10/100 Base-T auto-sensing USB USB connector (for model with USB interface only) Power Switch 12VAC Power connector Note: For use only with power supply OEM type AA-121A5BN, Leader type A48120150-C5.
Streszczenie treści zawartej na stronie nr. 11
Chapter 2: System Requirement and Installation Chapter 2: System Requirement and Installation System Requirement To access the IAD via Ethernet, the host computer must meet the following requirements: Equipped with an Ethernet network interface. Have TCP/IP installed. Allow the client PC to obtain an IP address automatically or set a fixed IP address. With a web browser installed: Internet Explorer 5.x or later. The IAD is configured with the default IP address of 192.168.1.1 and
Streszczenie treści zawartej na stronie nr. 12
ADSL Router User Manual Connecting the IAD Follow the steps below to connect the related devices. Connecting the ADSL line: connect the DSL port of the device to your ADSL wall outlet with RJ-11 cable. Please attach one end of the Ethernet cable with RJ-45 connector to the LAN port of your IAD. Connect the other end of the cable to the Ethernet port of the client PC. Connect the supplied power adapter to t
Streszczenie treści zawartej na stronie nr. 13
Chapter 2: System Requirement and Installation USB Driver Installation If the IAD is connected to a PC through the USB interface, you will be prompted for the USB drivers when plugging the USB cable to the PC. Refer to the relevant operating system to install the USB drivers. For Windows ME Run the USB installation program from the CD provided in your IAD package. An InstallShield Wizard will appear. Please wait for a moment. When the welcome screen appears, click Next for the next
Streszczenie treści zawartej na stronie nr. 14
ADSL Router User Manual When the complete window of the InstallShield Wizard appears, click Finish. Link your IAD and the PC with a USB cable. The system will detect the USB driver automatically. And then, the system will copy the proper files for this IAD. Note: If the USB device is not detected automatically, check the USB cable between the PC and the device. Besides, make sure that the device is power on. Whe
Streszczenie treści zawartej na stronie nr. 15
Chapter 2: System Requirement and Installation 2. On the Hardware tap, click Device Manager. 3. Confirm that the Siemens ADSL Router USB Remote NDIS Device is on the Network adapters list. For Windows XP Run the USB installation program from the CD provided in your IAD package. An InstallShield Wizard will appear. Please wait for a moment. 7
Streszczenie treści zawartej na stronie nr. 16
ADSL Router User Manual When the welcome screen appears, click Next for the next step. When the complete message of InstallShield Wizard appears, click Finish. Link your IAD and the PC with a USB cable. The system will detect the USB driver automatically. Note: If the USB device is not detected, check the USB cable between the PC and the device. Also make sure that the device is power on. Then the system wi
Streszczenie treści zawartej na stronie nr. 17
Chapter 2: System Requirement and Installation After the file copying finished, a completing message will appear. You can use the IAD now. To make sure your IAD is properly installed, please do the following steps. 1. Right-click on My Computer and press Properties. 2. On the Hardware tab, click Device Manager. 9
Streszczenie treści zawartej na stronie nr. 18
ADSL Router User Manual 3. Confirm that the Siemens ADSL Router USB Remote NDIS Device is on the Network adapters list. For Windows Vista For Vista users, please press Continue whenever a prompted window asking for permission to continue during USB driver installation process (see the figure below for example). To install the USB driver before connect the router to the PC, here provides two methods. Method One
Streszczenie treści zawartej na stronie nr. 19
Chapter 2: System Requirement and Installation When the welcome screen appears, click Next for the next step. When the complete message of InstallShield Wizard appears, click Finish. Link your router and the PC with a USB cable. The system will detect the USB driver automatically. 11
Streszczenie treści zawartej na stronie nr. 20
ADSL Router User Manual Note: If the USB device is not detected, check the USB cable between the PC and the device. Also make sure that the device is power on. After the file copying finished, a completing message will appear. You can use the router now. 12
