Streszczenie treści zawartej na stronie nr. 1
TABLE OF CONTENTS
Introduction
Before Using …………………………………………………………………………… 1
Packing List ……………………………………………………………………………. 2
Technical Specifications ……………………………………………………………….. 3
PVR Layout ……………………………………………………………………………. 4
SD Card Information …………………………………………………………………. . 5
Connection Diagram …………………………………………………………………… 7
Function Setup
PIP Function ……………………………………………………………………………. 7
Image Setup ……………………………………………………………………………. .8
Date/time Setup ……………………………………………………
Streszczenie treści zawartej na stronie nr. 2
. 6. The QSW1001R uses a DC 12V adapter for recording in a car. 7. Memorizes preset parameters and will not lose the settings when BEFORE USING power is off. 8. The stored photos/video clips will not be lost if power is lost. Special Attention 9. Can connect with alarm system/ video door phone. 1. Connect all the parts before turning on the power. 10. Supports NTSC/PAL video signals. 2. Cut off the power before inserting or pulling out SD Card to avoid 11. The saved file name is the reco
Streszczenie treści zawartej na stronie nr. 3
PVR Layout TECHNICAL SPECIFICATIONS The Top of PVR Product Model QSW1001R Voltage DC 12V Power Consumption 300mA Standard memory 128MB SD Card Maximum memory 2GB SD Card Photo format JPEG Photo pixels 640*480 Video format AVI Video pixels 320 *240 MODE: Change the mode of PVR between preview mode and playback Frames/Second 8fps mode. Video record time 10s/pc MENU: Enter the system main menu. Compression format Motion JPEG DISP: Switch the channels to di
Streszczenie treści zawartej na stronie nr. 4
Front Cover Directions for SD Card Operation 1) Power Switch Please insert SD card according to the following diagram: 2) Power Input Jack 3) Video & Audio In 4) Video & Audio Out 5) Alarm 6) ANT Back Cover 1) Channel Indicator 2) SD CARD: SD Card slot 3) Wireless Channel Selecting Button SD CARD Please make sure that the SD card is not locked. SD Card Information The unit can support a SD Card up to 2GB. It supports FAT3
Streszczenie treści zawartej na stronie nr. 5
The Connection Diagram. Image setup 1. Connect PVR video-in port and camera with video wire. A wireless camera will communicate with the wireless antenna 2. Connect video -out port and TV with video wire. 3. Please use special AC/DC Adapter or battery. 4. Please connect when power off. PIP (Picture in Picture) Function: Wired AV Wireless AV Monitor When you choose “ √ ”，“ √ ”will turn green, then press OK to confirm. When the wired camera and wireless camera are on at the same t
Streszczenie treści zawartej na stronie nr. 6
Date/Time Setup Year/month/day (1) Press MENU to enter system main menu. (5) After setting year/month/day, press RIGHT button to set hour/minute/second. (2) Press LEFT/RIGHT to set date and then press OK. hour/minute/second (6) Press UP/DOWN to set time, and then press OK to confirm. (3) Press LEFT/RIGHT to the needed option. hour/minute/second Exit Setup Year/month/day (1) Press LEFT/RIGHT to exit option and then press OK. (4) Press UP/DOWN to set the date. (
Streszczenie treści zawartej na stronie nr. 7
Record AVI/Photo Setup Exit setup (1) Press MENU to enter system main menu. (1) Press LEFT/RIGHT to exit option and then press ok. (2) Press MENU to exit directly. (2) Press LEFT/RIGHT to capture format AVI/Photo option. Photo/AVI quick setup Pressing DOWN directly in the preview mode can switch the capture format photo/AVI. (2) Press OK to switch photo option. AVI setup status (3) Press OK to switch record option.. P
Streszczenie treści zawartej na stronie nr. 8
NTSC/PAL Setup (5) Press OK again to switch to NTSC mode. (1) Press MENU to enter system main menu. (2)Press LEFT/RIGHT to setup option, then press OK to confirm. (6) Press LEFT/RIGHT to Exit option then press OK to exit.. (3) Press LEFT/RIGHT to NTSC/PAL option, then press OK to confirm. Exit Setup Press MENU to exit directly. (4) Press OK to switch to PAL mode (default is NTSC mode). 8
Streszczenie treści zawartej na stronie nr. 9
Image Quality Setup (1) Press MENU to enter system main menu. (5) Press OK again to switch to High image quality mode. (2) Press LEFT/RIGHT to setup option and then press OK to confirm. (6) Press LEFT/RIGHT to exit option (3) Press LEFT/RIGHT to image quality setup option. (7) Press OK to return to the setup. (4) Press OK to switch to Low image quality mode （default is High ）. Exit Setup Press MENU to exit directly. 9
Streszczenie treści zawartej na stronie nr. 10
(4) Press OK again to enter motion detect off status Motion Detection ON/OFF (1) Press MENU to enter system main menu. Exit Setup (1) Press LEFT/RIGHT to exit option and then press OK. (2) Press MENU to exit directly. (4) Press LEFT/RIGHT to motion detect on/off option. Motion Detection Quick Setup Press UP Key to directly switch the motion detect state. (3) Press OK to enter motion detect on status. 10
Streszczenie treści zawartej na stronie nr. 11
(4) Press OK to motion detect area setup. Motion Detect Off Motion Detection Area (1) Press MENU to enter system main menu. The dashed frame is the motion detect area. (5) Press LEFT/RIGHT to choose detect area and then press OK. (2) Press LEFT/RIGHT to setup option, and then press OK to confirm. Detect area can be divided into L / M / S (6) Press UP/DOWN/LEFT/RIGHT to move detect area and then press OK to exit motio
Streszczenie treści zawartej na stronie nr. 12
(7) Press LEFT/RIGHT to exit the option and then press OK to return to the setup. (3) Press LEFT/RIGHT to motion detect count option, and at the bottom of Exit Setup the screen it shows the current count. Press MENU to exit directly. (4) Press OK to choose count number. Motion Detection Count Motion detection count means number of photos that you choose to take in one motion detection (you can choose 1, 3, or 5 pictures). (1) Press MENU to enter system main menu. (2)
Streszczenie treści zawartej na stronie nr. 13
(3) Press LEFT/RIGHT to motion detect interval setup option,and at the Exit setup bottom of the screen shows the current interval Press MENU to exit directly. (4) Press OK to switch time. Motion Detection Interval Motion detection interval means that you can set 1, 3, or 5 second intervals between two motion detection events. (1) Press MENU to enter system main menu. (2) Press LEFT/RIGHT to setup option,and then press OK to confirm. (5) Press LEFT/RIGHT to exit
Streszczenie treści zawartej na stronie nr. 14
(2) Press LEFT/RIGHT to setup option and then press OK to confirm. Exit Setup Press MENU to exit directly. (3) Press LEFT/RIGHT to motion detect sensitivity option. (4) Press OK to sensitivity setup interface and there are target value/current Motion Detection Sensitivity value on the screen. The motion detection sensitivity range is 01-99. The lower the value, the lower the sensitivity is, the higher the value, the higher the sensitivity is. (1) Press MENU to enter
Streszczenie treści zawartej na stronie nr. 15
The Motion detect sensitivity value setting will be different in different situations, users can set the proper sensitivity value according to the spot simulation test. (6) Press LEFT/RIGHT to exit option and then press OK return to setup. Image playback The photos can be browsed by one or six thumbnails, or by folder. They can be deleted manually and you can also delete all, or the SD card can be formatted. Exit Setup Press MENU to exit directly. For motion detection sens
Streszczenie treści zawartej na stronie nr. 16
(1) Press MODE to playback interface in preview mode and the current image information will be shown at the bottom of the screen. (2) Press MODE again to return to preview mode. (2) Press OK to go to six thumbnail browse. (3) Press LEFT/RIGHT to select the pictures which you want to see. Browsing Pictures Browse Six Pictures (4) Press OK to see it in full screen. (1) Press MODE to go to playback interface in preview mode. 16
Streszczenie treści zawartej na stronie nr. 17
(5) Press MODE to return to preview mode. (2) Press DISP to choose folder. Using six thumbnail browse (3) Press UP/DOWN to select the folder you want to see and then press OK to confirm. EXIT Delete/Format Previous Picture Choose Folder Previous Group Next Picture Next Group Single or Six Pictures (4) The picture shows the first photo in current folder. Choose Folder (1) Press MODE to go to playback interface in preview mode. Deleting Images Del
Streszczenie treści zawartej na stronie nr. 18
(1) Press MODE to go to playback interface in preview mode. (2) Press MENU to delete menu. (2) Press MENU to go to delete menu. (3) Press LEFT/RIGHT to select Delete All, and then press (3) Press LEFT/RIGHT to select Delete One, and then press OK to confirm. OK to confirm. (4) Press LEFT/RIGHT to select DELETE or NOT DELETE option, (4) Press LEFT/RIGHT to select DELETE or NOT DELETE option, and then press OK to confirm. and then press OK to confirm.
Streszczenie treści zawartej na stronie nr. 19
Thank you for choosing our products. All of our products have a conditional free warranty repair service for hardware within 12 months starting from purchase date, and a free exchange service within one month (valid for manufacturing defects). Permanent upgrading service is provided for the software. (2) Press MENU to go to delete menu. Liability Exclusions: Any product malfunction, abnormalities in operation or damage caused by following reasons are not within the free service scope
Streszczenie treści zawartej na stronie nr. 20
Company Name Postal Address Postal code Phone Number E-mail Model Number of Product Serial Number of Product Purchase Date Distributor . 20
