Streszczenie treści zawartej na stronie nr. 1
Register your product and get support at
www.philips.com/welcome
SNB5600
EN Wireless Router
Streszczenie treści zawartej na stronie nr. 2
Streszczenie treści zawartej na stronie nr. 3
Table of contents 4.6 WIRELESS 10 1 Important 2 4.6.1 Channel and SSID 10 1.1 Safety information 2 4.6.2 Access control 11 1.2 Network range & speed information 2 4.6.3 Security 11 1.3 Conformity 2 4.7 NAT 11 1.4 Recycling and disposal 2 4.7.1 Address Mapping 12 1.5 FCC Radiation Exposure Statement 2 4.7.2 Virtual server 12 1.6 Software licenses 2 4.7.3 Special Applications 12 1.7 Disclaimer 2 4.7.4 NAT Mapping Table 12 2 Your Wireless Router 3 4.8 FIREWALL 12 2.1 What’s in the box 3 4.8.1 Acces
Streszczenie treści zawartej na stronie nr. 4
1.4 Recycling and disposal 1 Important Disposal instructions for old products : Take time to read this user manual before you use your Wireless The WEEE directive (Waste Electrical and Electronic Equipment Router. It contains important information and notes regarding your Directive ; 2002/96/EC) has been put in place to ensure that products Wireless Router. are recycled using best available treatment, recovery and recycling techniques to ensure human health and high environmental protection.
Streszczenie treści zawartej na stronie nr. 5
3 2Your Wireless Router Congratulations on your purchase and welcome to Philips ! To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome. 2.1 What’s in the box SNB5600 Quick start guide 1 Connect 2 Install Enjoy Wireless Router Quick start guide Power adapter Installation CD ROM Ethernet cable (RJ-45) 2.2 What else will you need A desktop or a laptop with free A modem A web browser An Internet connection USB port and an Ethernet connector Your Wir
Streszczenie treści zawartej na stronie nr. 6
2.3 Overview of the front side of the wireless router 2.4 Overview of the rear side of the wireless router 1 2 3 4 - + WAN LAN LAN LAN LAN 9V DC " A BC PHILIPS - + Model: SNB5600/00 Input: 9V 1A 0682 S/N: AB CD E Made in China A Reset ON : Power on, normal operation OFF : Power off or failure B ON : Wireless link is up D Blinking : Send / Receive data OFF : Wireless disable or failure AWAN port C Connect your modem to this port ON : Internet connection is up Blinking : Data transfering BLAN port
Streszczenie treści zawartej na stronie nr. 7
3.2 Connect 3 Getting started 1 Connect the supplied power adapter to the 9V DC port 3.1 Install 1 Insert the installation CD into the PC’s CD ROM (or DVD ROM) drive 2 Connect the power adapter to the electricity supply socket • The installation program will start automatically 2 Follow instructions on the screen Note If for some reason the installation does not start automatically : 1 Click on Windows START and then RUN 2Type explorer and navigate to the CD ROM (or DVD ROM) drive Power ligh
Streszczenie treści zawartej na stronie nr. 8
6 Connect this Ethernet cable to the LAN1 port 10 Click on Menu if you want to go back to the menu screen Tip Your WiFi network is running but not secured. 11 Click on Menu if you want to go back to the menu screen 12 Click on Set Encryption 7 Connect the other side of this Ethernet cable to your computer Your WiFi network will be secured by generating automatically an encryption key and a network name (SSID) Note At any time you can retrieve your wireless security settings using your instal
Streszczenie treści zawartej na stronie nr. 9
3.4 Install a WiFi device If you want to install a WiFi device you have to retrieve your wireless security settings using your installation CD ROM on the computer where you installed your gateway and by clicking on the security icon of the menu page. 3.4.1 Install a Wireless USB adapter SNU5600 If you have bought the starter kit SNK5600, the Wireless USB adapter SNU5600 is part of the box content. In that case you just have to insert the installation CD ROM, provided with your SNK5600, and
Streszczenie treści zawartej na stronie nr. 10
LAN 4 Configuring the Wireless Router WIRELESS Channel and SSID Access control Advanced users may want to change the configuration of their Wireless Security Router. This chapter explains how to access the configuration webpages, show you the struture of these webpages and it describes WEP them. WPA 802.1X 4.1 Log on the webpages NAT Address Mapping 1 Virtual Server Open your Internet Browser Special Applications 2 Enter http://192.168.1.2 in the address field NAT Mapping Table FIREWALL Access
Streszczenie treści zawartej na stronie nr. 11
4.3.2 Password Settings 4.4 WAN Use this page to change the password for accessing the management The router can be connected to your Internet Service Provider (ISP) in interface of the Wireless Router. any of the following ways : - Dynamic IP Address Passwords can contain from 3-12 alphanumeric characters and are case -PPPoE sensitive. - Static IP address Note If you lost the password, or you cannot gain access to the user interface, 4.4.1 Dynamic IP Address press the reset button on the rear
Streszczenie treści zawartej na stronie nr. 12
4.4.3 Static IP Address 4.5 LAN Your ISP provides a static IP address to access Internet services. You can enable DHCP to dynamically allocate IP addresses to your client PCs, or configure filtering functions based on specific clients or protocols. The router must have an IP address for the local network. 4.4.4 Clone MAC Address 4.6 WIRELESS Some ISP’s require you to register your MAC address with them. If you have done this, the MAC address of the router must be changed to the MAC address t
Streszczenie treści zawartej na stronie nr. 13
To manually configure the encryption key, enter five hexadecimal pairs of digits for each 64-bit key, or enter 13 pairs for the single 128-bit key. 4.6.2 Access control (A hexadecimal digit is a number or letter in the range 0-9 or A-F). Note that WEP protects data transmitted between wireless nodes, but does not protect any transmissions over your wired network or over the Internet. WPA Access Control allows users to define the outgoing traffic permitted or not-permitted through the WAN int
Streszczenie treści zawartej na stronie nr. 14
4.7.1 Address Mapping 4.7.3 Special Applications Allows one or more public IP addresses to be shared by multiple Some applications require multiple connections, such as Internet internal users. This also hides the internal network for increased privacy gaming, video-conferencing, and Internet telephony. and security. Enter the Public IP address you wish to share into the Global IP field. Enter a range of internal IPs that will share the global IP These applications may not work when Network Ad
Streszczenie treści zawartej na stronie nr. 15
Network attacks that deny access to a network device are called Denial-of-Service (DoS) attacks. DoS attacks are aimed at devices and 4.8.3 URL blocking networks with a connection to the Internet. Their goal is not to steal information, but to disable a device or network so users no longer have access to network resources. The Wireless Router firewall function protects against the following DoS attacks : IP Spoofing, Land Attack, Ping of Death, IP with zero length, Smurf Attack, UDP port l
Streszczenie treści zawartej na stronie nr. 16
RIP Defect (Default : Disabled) - If an RIP request packet is not two-way Internet access. Enter the IP address of a DMZ (Demilitarized acknowledged to by the router, it will stay in the input queue and not Zone) host on this screen. Adding a client to the DMZ may expose your be released. Accumulated packets could cause the input queue to fill, local network to a variety of security risks, so only use this option as a causing severe problems for all protocols. enabling this feature prevents l
Streszczenie treści zawartej na stronie nr. 17
4.11 TOOLS 4.11.3 Reset Use the Maintenance menu to backup the current configuration, restore Click "REBOOT ROUTER" to reset the Wireless Router. a previously saved configuration, restore factory settings, update If you perform a reset from this page, the configuration will not be firmware, and reset the Wireless Router. changed back to the factory default settings. Note 4.11.1 Configuration Tools If you use the Reset button on the rear panel, the Wireless Router performs a power reset. Press
Streszczenie treści zawartej na stronie nr. 18
4.13 SET UP WIZARD 4.13.4 Connection type settings 4.13.1 Getting started This page allows you to select a connection type to connect Internet (see 4.4). Make sure the router is connected correctly. For a detailed description, Dynamic IP refer to the user manual. This can be found on the Installation CD provided. 4.13.2 Time zone This page allows you to obtain an IP address automatically from your Service Provider. This page allows you to configure the local time zone and automatic time main
Streszczenie treści zawartej na stronie nr. 19
5 Technical data Ports Modulation Rate - Output Power (dBm) Four 10/100Mbps Rj-45 Ports 802.11g - 6Mbps (15dBm) 802.11g - 9Mbps (15dBm) Management Features 802.11g - 12Mbps (15dBm) Firmware upgrade via web based management 802.11g - 18Mbps (15dBm) Web based management (configuration) 802.11g - 24Mbps (15dBm) Power indicators 802.11g - 36Mbps (15dBm) Event and history logging 802.11g - 48Mbps (15dBm) Network ping 802.11g - 54Mbps (15dBm) Security Features Sensitivity M
Streszczenie treści zawartej na stronie nr. 20
Make sure the Ethernet cable (RJ45) is firmly connected to your Wireless Router 6 Frequently asked questions Make sure you are using the correct cable type for your Ethernet equipment Verify that the IP address is properly configured. For most In this chapter you will find the most frequently asked questions and applications, you should use the Wireless Router DHCP function to answers about your Wireless Router. dynamically assign IP address to hosts on the attached LAN. However, if
