Streszczenie treści zawartej na stronie nr. 1
BR-6104K / BR-6104KP
BR-6104K / BR-6104KP
F Fa as st t E Et th he er rn ne et t B Br ro oa ad db ba an nd d R Ro ou ut te er r
User’s Manual
1
Streszczenie treści zawartej na stronie nr. 2
Introduction .......................................................................................................... 4 Features ............................................................................................................... 4 Minimum Requirements ....................................................................................... 4 Package Content.................................................................................................. 4 Note....................
Streszczenie treści zawartej na stronie nr. 3
2.5 Firewall......................................................................................................... 32 2.5.1 Access Control .......................................................................................... 32 2.5.2 URL Blocking............................................................................................. 35 2.5.3 Denial of Service (DoS)............................................................................. 35 2.5.4 DMZ .........................
Streszczenie treści zawartej na stronie nr. 4
Introduction Congratulations on purchasing this Broadband Router. This Broadband Router is a cost-effective IP Sharing Router that enables multiple users to share the Internet through an ADSL or cable modem. Simply configure your Internet connection settings in the Broadband Router and plug your PC to the LAN port and you're ready to share files and access the Internet. As your network grows, you can connect another hub or switch to the router’s LAN ports, allowing you to easily expand your
Streszczenie treści zawartej na stronie nr. 5
1) Local Area Network (LAN) The Broadband router’s 4 LAN ports are where you connect your LAN’s PCs, printer servers, hubs and switches etc. 2) Wide Area Network (WAN) The WAN port is the segment connected to your xDSL or Cable modem and is linked to the Internet. 3) Reset The Reset button allows you to do one of two things. 1) If problems occur with your router, press the router’s reset button with a pencil tip (for less than 4 seconds) and the router will re-boot itse
Streszczenie treści zawartej na stronie nr. 6
Setup Diagram Figure 1.2 below shows a typical setup for a Local Area Network (LAN). Figure 1.2 6
Streszczenie treści zawartej na stronie nr. 7
Getting started This is a step-by-step instruction on how to start using the router and get connected to the Internet. 1) Setup your network as shown in the setup diagram above (fig 1.2). 2) You then need to set your LAN PC clients so that it can obtain an IP address automatically. All LAN clients require an IP address. Just like an address, it allows LAN clients to find one another. (If you have already configured your PC to obtain an IP automatically then proceed to step 3, page 11) Co
Streszczenie treści zawartej na stronie nr. 8
Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server available on your LAN. Once you’ve configured your PC to obtain an IP address automatically, please proceed to Step 3 2b) Windows XP 1: Click the Start button and select Settings, then click Network Connections. The Network Connections window will appear. 2: Double-click Local Area Connection icon. The Local Area Connection window will appear. 3: Check your list of Network Components. You should s
Streszczenie treści zawartej na stronie nr. 9
2c) Windows 2000 1: Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2: Double-click Network and Dial-up Connections icon. In the Network and Dial-up Connection window, double-click Local Area Connection icon. The Local Area Connection window will appear. 3: In the Local Area Connection window, click the Properties button. 4: Check your list of Network Components. You should see Internet Protocol [TCP/IP] on your list. Select it
Streszczenie treści zawartej na stronie nr. 10
2d) Windows NT 1: Click the Start button and select Settings, then click Control Panel. The Control Panel window will appear. 2: Double-click Network icon. The Network window will appear. Select the Protocol tab from the Network window. 3: Check if the TCP/IP Protocol is on your list of Network Protocols. If TCP/IP is not installed, click the Add button to install it now. If TCP/IP is installed, go to step 5. 4: In the Select Network Protocol window, select the TCP/IP Protocol and click t
Streszczenie treści zawartej na stronie nr. 11
3) Once you have configured your PCs to obtain an IP address automatically, the router’s DHCP server will automatically give your LAN clients an IP address. By default the Broadband Router’s DHCP server is enabled so that you can obtain an IP address automatically. To see if you have obtained an IP address, see Appendix A. Note: Please make sure that the Broadband router’s DHCP server is the only DHCP server available on your LAN. If there is another DHCP on your network, then you’ll need
Streszczenie treści zawartej na stronie nr. 12
Menu Description Quick Setup Wizard Select your Internet connection type and then input the configurations needed to (Chapter 1) connect to your Internet Service Provider (ISP). This section contains configurations for the Broadband router’s advance General Setup functions such as: Address Mapping, Virtual Server, Access Control, Hacker (Chapter 2) Attack Prevention, DMZ, Special applications and other functions to meet your LAN requirements. In this section you can see the Broadband ro
Streszczenie treści zawartej na stronie nr. 13
Chapter 1 Quick Setup The Quick Setup section is designed to get you using the broadband router as quick as possible. In the Quick Setup you are required to fill in only the information necessary to access the Internet. Once you click on the Quick Setup Wizard in the HOME page, you should see the screen below. Step 1) Time Zone The Time Zone allows your router to base its time on the settings configured here, this will affect functions such as Log entries and Firewall settings.
Streszczenie treści zawartej na stronie nr. 14
Step 2) Broadband Type In this section you have to select one of four types of connections that you will be using to connect your broadband router’s WAN port to your ISP (see screen below). Note: Different ISP’s require different methods of connecting to the Internet, please check with your ISP as to the type of connection it requires. Menu Description Cable Modem Your ISP will automatically give you an IP address Fixed-IP xDSL Your ISP has given you an IP address already Your
Streszczenie treści zawartej na stronie nr. 15
Parameter Description If your ISP requires a Host Name, type in the host name provided by your ISP, otherwise Host Name leave it blank if your ISP does not require a Host Name. Your ISP may require a particular MAC address in order for you to connect to the Internet. This MAC address is the PC’s MAC address that your ISP had originally connected your Internet connection to. Type in this MAC address in this section or use MAC Address the “Clone MAC Address” button to replace the WAN MAC ad
Streszczenie treści zawartej na stronie nr. 16
1.3 PPPoE Select PPPoE if your ISP requires the PPPoE protocol to connect you to the Internet. Your ISP should provide all the information required in this section. Parameter Description User Name Enter the User Name provided by your ISP for the PPPoE connection Password Enter the Password provided by your ISP for the PPPoE connection This is optional. Enter the Service name should your ISP requires it, otherwise leave it Service Name blank. This is optional. You can specify the
Streszczenie treści zawartej na stronie nr. 17
Parameter Description The ISP requires you to obtain an IP address by DHCP automatically efore connecting to Obtain an IP address the PPTP server. Use the following IP The ISP gives you a static IP to be used to connect to the PTP server. address IP Address This is the IP address that your ISP has given you to establish a PPTP connection. Enter the Subnet Mask provided by your ISP Subnet Mask (e.g. 255.255.255.0) Gateway Enter the IP address of the ISP Gateway Enter the User Name
Streszczenie treści zawartej na stronie nr. 18
Chapter 2 General Settings Once you click on the General Setup button at the Home Page, you should see the screen below. If you have already configured the Quick Setup Wizard you do NOT need to configure anything thing in the General Setup screen for you to start using the Internet. The General Setup contain advanced features that allow you to configure the router to meet your network’s needs such as: Address Mapping, Virtual Server, Access Control, Hacker Attack Prevention, Speci
Streszczenie treści zawartej na stronie nr. 19
2.1 System The system screen allows you to specify a time zone, to change the system password and to specify a remote management user for the broadband router. Parameter Description System Settings Select the time zone of the country you are currently in. The router will set its time based Time Zone on your selection. Password Settings Allows you to select a password in order to access the web-based management website. Remote Management You can specify a Host IP address that ca
Streszczenie treści zawartej na stronie nr. 20
2.1.2 Password Settings You can change the password required to log into the broadband router's system web-based management. By default, there is no password. So please assign a password to the Administrator as soon as possible, and store it in a safe place. Passwords can contain 0 to 30 alphanumeric characters, and are case sensitive. Parameter Description Enter your current password for the remote management administrator to login to your Current Password Broadband router. Note:
