Instrukcja obsługi D-Link DWL-900AP

Streszczenie treści zawartej na stronie nr. 1

This product can be set up using any DWL-900AP+

current web browser, i.e., Internet
D-Link AirPlus™

Explorer 5x, Netscape Navigator 4x.
Wireless Access Point


Before You Begin
It’s best to use a computer (with an Ethernet adapter) that is connected to a router for
configuring the DWL-900AP+. The default IP address for the DWL-900AP+ is
192.168.0.50 with a Subnet Mask of 255.255.255.0. You will need to assign your
computer a Static IP address within the same range as the

Streszczenie treści zawartej na stronie nr. 2

Connecting The DWL-900AP+ Wireless Access Point To Your Network A. First, connect the power adapter to the receptor at the back panel of the DWL-900AP+ and then plug the other end of the power adapter to a wall outlet or power strip. The Power LED will turn ON to indicate proper operation. B. Using a Straight-Through Ethernet When connecting cable, insert one end of the cable to the the DWL-900AP+ Ethernet port on the back panel of the Wireless Access Point to DWL-900AP+ and t

Streszczenie treści zawartej na stronie nr. 3

When you have completed the steps in this Quick Installation Guide, your connected network should look similar to this: Using The Setup Wizard Open your Web browser and type “http://192.168.0.50” into the URL address box. Then press the Enter or Return key. The logon pop-up screen will appear. Type “admin” for the username and leave the password field blank. Click OK

Streszczenie treści zawartej na stronie nr. 4

Using The Setup Wizard (continued) Once you have logged in, the Home screen will appear. Click Run Wizard You will see the following screens. Click Next

Streszczenie treści zawartej na stronie nr. 5

Step 1 - Set up your new password. You have the option to establish a password. Click Next Step 2 - Wireless Setup The default wireless settings are: SSID = default Channel = 6 You can change these settings to match an existing wireless network. Click Next Step 3 - Encryption The DWL-900AP+ is capable of three levels of wireless encryption - 64-bit, 128-bit, and 256-bit. By default the encryption is disabled. You can change the encryption settings for more secu

Streszczenie treści zawartej na stronie nr. 6

Your Setup is Complete! Click Restart Click Close You will be returned to the Home tab.

Streszczenie treści zawartej na stronie nr. 7

Click Exit For additional settings or information, refer to the Advanced, Tools, or Status tabs on the web-management interface; or to the manual located on the CD-ROM.

Streszczenie treści zawartej na stronie nr. 8

Technical Support You can find the most recent software and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States for the duration of the warranty period on this product. U.S. customers can contact D-Link technical support through our web site or by phone. D-Link Technical Support over the Telephone: (800) 758-5489 24 hours a day, seven days a week D-Link Technical Support